Parts for QHC08LXW1: Room Air Conditioner Parts

The Main Board is an OEM part for GE air conditioners. This part regulates the temperature, fan speed, and other settings of your GE air conditioner. It communicates with different sensors and components to maintain the desired cooling settings,

A bad main control board can occur due to electrical malfunctions or component failure. If you experience symptoms such as the air conditioner not turning on, erratic temperature control, or unresponsive buttons, it may be time to replace the main control board.

Symptoms of a bad main control board include:

• Air conditioner not turning on
• Erratic temperature control
• Unresponsive buttons or display

Restore the operation of your GE air conditioner by replacing the faulty main control board with this genuine OEM part.

This GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore models.
 

A replacement bracket guide that secures and aligns a component inside the appliance to restore proper fit and movement. Replaces a worn or damaged guide to help eliminate misalignment and rubbing. What it does

• Secures and positions an internal component or assembly for proper alignment
• Guides sliding or moving parts to reduce binding and wear
• Restores stable mounting after bracket damage or breakage
• Helps stop noise or improper operation caused by a loose or broken guide

• One bracket guide

• Disconnect power and water (if applicable) before beginning any repair
• Basic hand tools are typically required;
• Handle plastic guides carefully to avoid snapping during installation

This Wi-Fi module enables an appliance to connect to a home wireless network so you can use remote monitoring and smart features. Replaces a failed wireless board to restore app connectivity and remote control functionality. What it does:

• Provides wireless network connectivity for the appliance's smart features and app control.
• Allows remote diagnostics, notifications, and use of connected functions when paired with the manufacturer app.
• Commonly used when the appliance won't connect to Wi-Fi or shows communication/connectivity errors.
• Replaces a faulty communications board that prevents remote commands and status updates.

• One Wi-Fi module

• Disconnect power to the appliance before starting—this part is mounted behind the control panel.
• Handle the board by the edges and avoid touching contacts to prevent static damage.
• Some models require removing the control console or rear panel to access the module; keep fasteners organized.

This UI control board is the user-interface module that operates the appliance's front controls and display, restoring responsive touch/button input and readable status feedback for normal operation. What it does:

• Receives and translates button/touch inputs to the appliance control system
• Drives the display and indicator lights so you can view settings and status
• Helps resolve symptoms like unresponsive front controls, blank or garbled display, or intermittent input response
• Works with the main control to send user commands for cooking/cycle selection and timers

• Disconnect power to the appliance before attempting replacement to avoid shock or damage
• Handle the board by the edges and avoid electrostatic discharge; use ESD protection if available
• Reconnect power and test the control functions before fully reassembling the appliance

This UI board cover is the outer trim that protects and finishes the appliance control panel, keeping the user interface and electronics shielded from grease, steam and everyday wear while restoring a clean appearance. What it does:

• Covers and protects the control board and user interface from moisture, dirt and cooking residues
• Provides the finished trim and mounting surface for control buttons and display openings
• Helps prevent accidental contact with electronics behind the control panel
• Replaces cracked, warped or cosmetically damaged control-panel covers

• One UI board cover (single piece)

• Disconnect power to the appliance before starting any repair
• Remove any trim or control-panel screws and lift the old cover away; handle glass or plastic parts carefully to avoid scratches
• Verify orientation and alignment before tightening fasteners; do not force or over-tighten

This refrigerator water filter cartridge replaces the factory filter to help reduce taste and odor issues and deliver cleaner-tasting drinking and ice water. It fits in-line with the fridge's filtered water system for easy swap-outs. What it does:

• Filters sediment and common contaminants that can cause cloudy, off-tasting, or odorous water
• Restores proper water and ice taste when the active filter is worn or expired
• Helps maintain typical water flow when functioning correctly
• Works as the replaceable cartridge in the refrigerator's water filtration assembly

• One refrigerator water filter cartridge

• Follow the refrigerator manufacturer's instructions for filter removal and installation
• Turn off the water supply and dispense a small amount of water to relieve line pressure before replacing
• After installation, flush the new filter per manufacturer guidance until water runs clear

A replacement top rail that restores the finished look and edge protection at the refrigerator cabinet top. Replaces a dented, cracked or missing trim piece to improve appearance and keep the cabinet edge covered. What it does

• Covers and protects the refrigerator's upper cabinet edge from damage and wear.
• Helps keep the top sealed and finished for a cleaner, factory look.
• Prevents debris from collecting in the cabinet seam and reduces drafts at the top trim.
• Commonly replaced when the rail is dented, cracked, loose, or cosmetically damaged.

• Disconnect power to the appliance before starting work; follow all safety precautions.
• Typical installation requires removing a few screws or clips—retain hardware and note placement.
• Handle the replacement carefully to avoid scratching the finish; align the rail before final fastening.

The Remote Control is an OEM part for GE window air conditioners. It allows convenient wireless operation from across the room.   

Causes of a faulty remote include faded or stuck buttons from heavy usage. Moisture or dust intrusion due to lack of sealing over time can compromise electronics. 

Symptoms of a bad remote control involve:

• Unresponsive or randomly operating buttons  
• Inability to power the unit on or off from a distance
• Range or reception issues where controls don't work
• Missing buttons preventing complete functionality

This GE replacement ensures hassle-free temperature adjustment without approaching the AC unit. Compatible with some Frigidaire, Danby, and Honeywell branded window air conditioners as well. The remote preserves full programming and convenient control when manual overrides are needed at the unit.

This installation kit supplies the mounting hardware needed to secure compatible appliances during installation, helping ensure a stable, professional fit. Designed to match OEM fit and function for straightforward replacement. What it does:

• Provides the screws, brackets and fasteners used to mount the appliance securely
• Replaces missing or damaged installation hardware that can prevent proper installation
• Helps stop movement, rattling or misalignment caused by worn or lost fasteners
• Works with the appliance's factory mounting points to restore original mounting integrity

• Manufacturer-supplied installation hardware

• Disconnect power and follow the appliance installation instructions before starting work
• Use proper hand tools; do not force parts or overtighten fasteners
• Verify all pieces are present and match the appliance's mounting points before finalizing installation