Parts for QHM15AXW1: Room Air Conditioner Parts

This fan motor restores airflow where the original motor has failed, helping the appliance maintain proper circulation and stable temperatures. Designed as a direct replacement to get your appliance running reliably again. What it does:

• Spins the fan/blower to circulate air through the appliance for proper operation
• Replaces a noisy or non-spinning motor to stop unusual sounds or vibration
• Restores normal airflow when reduced circulation is causing performance issues
• Helps prevent overheating of components by re-establishing airflow

• One fan motor

• Disconnect power before starting any repair to reduce risk of electric shock
• Access may require removing panels or components; keep fasteners organized
• Note wire/harness positions before disconnecting so you can reconnect correctly
• Handle the fan blade gently to avoid bending or imbalance; verify secure mounting before restoring power

This UI board cover is the outer trim that protects and finishes the appliance control panel, keeping the user interface and electronics shielded from grease, steam and everyday wear while restoring a clean appearance. What it does:

• Covers and protects the control board and user interface from moisture, dirt and cooking residues
• Provides the finished trim and mounting surface for control buttons and display openings
• Helps prevent accidental contact with electronics behind the control panel
• Replaces cracked, warped or cosmetically damaged control-panel covers

• One UI board cover (single piece)

• Disconnect power to the appliance before starting any repair
• Remove any trim or control-panel screws and lift the old cover away; handle glass or plastic parts carefully to avoid scratches
• Verify orientation and alignment before tightening fasteners; do not force or over-tighten

This UI control board is the user-interface module that operates the appliance's front controls and display, restoring responsive touch/button input and readable status feedback for normal operation. What it does:

• Receives and translates button/touch inputs to the appliance control system
• Drives the display and indicator lights so you can view settings and status
• Helps resolve symptoms like unresponsive front controls, blank or garbled display, or intermittent input response
• Works with the main control to send user commands for cooking/cycle selection and timers

• Disconnect power to the appliance before attempting replacement to avoid shock or damage
• Handle the board by the edges and avoid electrostatic discharge; use ESD protection if available
• Reconnect power and test the control functions before fully reassembling the appliance

The Main Board is an OEM part for GE air conditioners. This part regulates the temperature, fan speed, and other settings of your GE air conditioner. It communicates with different sensors and components to maintain the desired cooling settings,

A bad main control board can occur due to electrical malfunctions or component failure. If you experience symptoms such as the air conditioner not turning on, erratic temperature control, or unresponsive buttons, it may be time to replace the main control board.

Symptoms of a bad main control board include:

• Air conditioner not turning on
• Erratic temperature control
• Unresponsive buttons or display

Restore the operation of your GE air conditioner by replacing the faulty main control board with this genuine OEM part.

This GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore models.
 

This capacitor clamp secures the appliance's start/run capacitor to the frame, keeping the capacitor stable and protected. A snug clamp helps prevent vibration damage and electrical connection issues for reliable motor starting. What it does:

• Holds the capacitor firmly in place to reduce vibration and movement during operation
• Protects capacitor terminals and wiring from rubbing or chafing
• Helps prevent intermittent motor-starting problems caused by a loose capacitor
• Can reduce noise caused by a rattling or unsecured capacitor

• One capacitor clamp/mounting clip as shown

• Always disconnect power to the appliance before accessing electrical components
• If replacing a capacitor as well, discharge the capacitor per OEM instructions before handling
• Inspect surrounding wiring and fasteners; replace any worn clips or damaged insulation
• Secure clamp to the same mounting point and orientation as the original for proper fit

This capacitor clamp secures the refrigerator/freezer compressor or control capacitor in place, preventing movement and vibration for quieter, more reliable operation. It keeps the capacitor mounted so wiring and terminals stay stable. What it does:

• Holds the compressor/control capacitor firmly to prevent shifting or rattling
• Reduces stress on capacitor terminals and wiring that can cause intermittent operation
• Helps stop noise caused by a loose or vibrating capacitor assembly
• Preserves correct clearance so nearby components are not contacted or damaged

• Disconnect appliance power before beginning work to avoid shock
• Discharge the capacitor safely per OEM instructions before touching terminals
• Use basic hand tools to remove and replace the clamp; retain any original fasteners if reusable
• Replace those components per manufacturer guidance

This replacement refrigerator water filter helps reduce taste and odor in drinking water and ice, restoring cleaner-tasting water from your dispenser and ice maker. It's a direct-replacement consumable designed for regular maintenance. What it does

• Removes common taste- and odor-causing chlorine and particulate matter to improve water and ice flavor
• Helps reduce visible particles and cloudiness in dispensed water
• Supports safer-tasting drinking water as part of scheduled filter replacement

• One replacement refrigerator water filter

• Turn off the water supply and dispense water to relieve system pressure before removing the old filter
• Follow the refrigerator manufacturer's instructions for filter removal and insertion to ensure proper seal
• After installation, run several liters of water through the dispenser to flush the new filter and clear air
• Replace per the appliance manufacturer's recommended interval and dispose of used filters properly

This front panel assembly replaces a worn, cracked or damaged control panel trim to restore the appliance's appearance and protect underlying controls. It provides a finished bezel around the control area for a secure, factory look. What it does:

• Covers and protects the control buttons, display and circuit area from spills and debris.
• Restores the appliance's cosmetic appearance when the original panel is scratched, cracked or faded.
• Helps keep control components securely in place and prevents direct contact with internal electronics.
• Commonly replaced when buttons or display edges are exposed, panel is loose, or the fascia is damaged.

• Disconnect power to the appliance before beginning any repair to avoid shock or injury.
• Removal typically requires detaching the outer trim/fascia and may expose sharp edges; wear gloves and eye protection.
• Keep screws and small parts organized during disassembly; some models require control board or trim removal to install the panel.

This replacement power cord supplies mains power to compatible GE appliances, restoring safe and reliable electrical connection. Use it when a frayed or damaged cord prevents the appliance from powering on or causes intermittent power. What it does:

• Replaces the appliance's factory power cord to restore electrical connection
• Stops power interruptions caused by damaged or worn wiring
• Reduces risk of shorts or sparks from cracked insulation (when installed correctly)
• Fits appliances designed for a three-prong, grounded cord connection

• One replacement power cord as shown

• Disconnect power at the house circuit or unplug the appliance before replacing the cord
• Secure strain relief and terminal connections per the appliance wiring harness and OEM instructions

The Remote Control is an OEM part for GE window air conditioners. It allows convenient wireless operation from across the room.   

Causes of a faulty remote include faded or stuck buttons from heavy usage. Moisture or dust intrusion due to lack of sealing over time can compromise electronics. 

Symptoms of a bad remote control involve:

• Unresponsive or randomly operating buttons  
• Inability to power the unit on or off from a distance
• Range or reception issues where controls don't work
• Missing buttons preventing complete functionality

This GE replacement ensures hassle-free temperature adjustment without approaching the AC unit. Compatible with some Frigidaire, Danby, and Honeywell branded window air conditioners as well. The remote preserves full programming and convenient control when manual overrides are needed at the unit.