Parts for Lg LW1216HR/00: Room A / C Parts

This clamp secures a line or connection inside your appliance, maintaining a tight fit under vibration. Replacing a fatigued clamp helps prevent leaks or disconnections and keeps components anchored so the system operates reliably.

• Holds a line/fitting firmly to keep the joint sealed and secure
• Helps prevent leaks or disconnections at hose/tube connections
• Resists vibration that can loosen fittings during operation
• Replace if bent, weakened, or corroded, or if the connection repeatedly loosens

• Disconnect power and, if applicable, shut off water supply before service
• Note clamp orientation and routing; seat the clamp just behind the fitting bead/stop
• Use the correct tool for your clamp style to compress or tighten evenly
• After reassembly, restore utilities and test for leaks or movement

Restore full remote control function with this replacement remote controller assembly. Replaces a damaged or unresponsive remote PCB and button cluster so the unit responds reliably to power, volume, input and menu commands. What it does:

• Replaces the internal circuit board and button interface that transmit IR/remote signals.
• Fixes symptoms like unresponsive or intermittent buttons, no power or no signal from the remote.
• Restores control of common functions such as power, volume, input selection and menu navigation.
• Useful when buttons are stuck, the remote was dropped, or the internal electronics are damaged.

• Remove batteries and disconnect power from the appliance before replacing the assembly.
• Handle the PCB by its edges to avoid damage from static or oils; keep small screws and clips organized.
• Reassemble the remote housing carefully to avoid pinching ribbons or misaligning buttons.

This display power control board assembly powers and controls the appliance's user interface so the display and touch/press buttons respond correctly. Replacing a faulty board restores normal display operation and control signals. What it does:

• Powers the control/display panel and manages display illumination
• Processes user inputs from the console so selections are registered
• Helps regulate signals sent to other control modules
• Commonly replaced for unresponsive, dim, or blank display symptoms

• Disconnect all power before starting; risk of electric shock.
• Handle the PCB by its edges and avoid static discharge; use ESD precautions.
• Verify functionality before reassembling the cabinet and panels.

This is the main PCB power control board assembly that manages an appliance's power distribution and control signals, restoring electronic control when the original board fails. Replaces a damaged or nonresponsive main control module. What it does:

• Controls power to motors, valves, and user-interface circuits
• Processes user inputs and runs the appliance's control logic
• Can prevent proper cycling or temperature regulation if damaged

• Disconnect power at the breaker or unplug the appliance before starting
• Document wiring and take photos before removing the old board to ensure correct reconnection
• Handle the board by edges and avoid static discharge; wear an ESD strap if available

This AC motor assembly powers appliance airflow and circulation functions, restoring proper fan or blower movement for cooling and ventilation. Designed as a direct replacement to return reliable motor-driven airflow. What it does:

• Spins the fan/blower to move air through the appliance for cooling or ventilation
• Replaces a motor that has failed to start, is noisy, or runs intermittently
• Stops symptoms like no airflow, weak airflow, or a motor that hums but won't spin
• Helps prevent overheating by restoring designed air circulation when functioning properly

• Always unplug the appliance or shut off power at the breaker before servicing
• Basic hand tools are typically required; mounting hardware may reuse existing fasteners

The A/C Condenser Fan Blade is an OEM part for LG air conditioners. This fan blade is responsible for drawing air through the condenser coils to dissipate heat, ensuring the air conditioner operates efficiently and effectively.

Over time, the condenser fan blade can become damaged or worn out due to exposure to outdoor elements, debris, or physical impact. Additionally, regular use can lead to wear and tear, affecting the fan blade’s performance.

Symptoms of a bad A/C condenser fan blade include:

• Reduced cooling efficiency
• Unusual noises such as rattling or clanking from the fan area
• The fan not spinning or spinning unevenly
• The air conditioner frequently cycling on and off due to overheating

This OEM LG part is also compatible with Sears/Kenmore models.

This blower is the rotating wheel that moves air through the dryer to support proper drying and venting. Replacing a worn or damaged blower restores airflow for more efficient, consistent drying performance. What it does

• Spins to pull air from the drum through the heater and out the vent
• Restores normal airflow when a blower wheel is cracked, broken, or missing fins
• Helps reduce long dry times, overheating, or unusual noises caused by a failing blower
• Works with the dryer motor and housing to maintain proper ventilation

• One blower wheel

• Disconnect power to the dryer before starting any repair
• Access typically requires removing the dryer front or rear panel and detaching the drum or blower housing
• Inspect the motor shaft and mounting hardware; replace any worn fasteners or bearings as needed

Replace a missing or damaged installation kit with this Install Part Assembly. Designed for select air conditioners, it helps secure and seal the unit during setup for a stable fit and reliable performance.

• Provides the correct mounting/finishing components needed for proper installation
• Helps seal the opening to minimize air leaks and reduce vibration/noise
• Restores secure, stable support of the chassis during and after install
• Symptoms indicating replacement: incomplete installation, loose fit, rattling, or drafts around the unit

• Disconnect power before beginning; use two people to lift and support the unit
• Follow the model's installation instructions carefully
• Inspect the opening/sleeve; install level and tighten all fasteners securely
• After installation, verify a tight perimeter seal and stable, rattle-free operation