Parts for Weedeater 96112008800: Rotary Mower Parts

This replacement part is a guide kit. This is a genuine replacement part made by Husqvarna. Guide kits are small parts that connect to the side of a lawnmower to help the user create clean lines during use. The rope is looped through the guide so that the user maintains consistent work. A new guide kit might be needed if the user is unable to maintain clean lines while cutting grass. If the guide loop is worn down and will not hold rope correctly, it might be time to replace the guide kit. This repair should be fairly simple and only require common household tools such as a screwdriver and perhaps pliers if the previous piece is stuck. This is a genuine OEM replacement part. This part is sold individually and is sourced directly from the manufacturer to ensure proper fit.

The replacement handle bolt here can be used for lawn and garden equipment. The handle bolt is used with the handle knob to help secure the upper and lower handles of the machine together. If the bolt is damaged or missing, it will not be possible to secure the handles properly. The handle bolts are durable and made from metal, but they could become damaged due to corrosion or natural wear. In other cases, they could become lost. In either case, they will need to be replaced. The replacement is simple and will not require any tools, as the square part of the bolt will fit into the handle perfectly. The handle knob will then be used to keep it in place. The handle bolt is a genuine OEM Part for lawn mowers and snowblowers. It is compatible with some models from Husqvarna, Murray, Weed Eater, Poulan, Jonsered, Craftsman, and Ryobi. It should be noted that this product is sold individually, and the handle knob is not included.

This genuine Husqvarna part is a hairpin cotter intended for use with Poulan, Husqvarna and Weed Eater brand walk-behind lawn mowers. This hairpin cotter, also known as a clip or hinchpin, is used to secure a component on a shaft in the lawn mower . This part is shaped like a bobby pin with a single piece of metal formed into a large ring at the top end, and a "W" shape at the other. This is designed to work with the groove or hole at the tip of a hitch pin, where this pin will lock larger pins in place. This part is an identical replacement for an original carrier bracket that is damaged, faulty, or missing. This dependable bracket carrier is made of high quality durable metal.This is an OEM replacement part sourced directly from the manufacturer and is sold individually. For installation information or hardware requirements, please refer to the original product manual. This part is a suitable replacement for a hairpin cotter in products from Husqvarna, Poulan, Weed Eater, Craftsman, Murray, Ariens, Ryobi, and other brands.

This is a handle knob for many brands of lawnmowers, snowblowers, or trimmers. It attaches to the upper or lower handle on adjustment levers. This genuine OEM handle knob is a frequently lost or broken component as it is on the exterior of the machine, used frequently, and often struck during use. It will need to be replaced if it becomes wobbly or refuses to remain firmly in place. The only tools required to install the authentic replacement part will be a rubber mallet and a 1/16 punch. It is threaded to easily install once the cap has been removed with the punch. Made of durable materials, it ships individually but may require the use of a handle bolt depending upon the machine it is being used to repair. It works on rotary lawnmowers as well as manually and self-propelled models from brands like Husqvarna, Poulan, Weed Eater, Ryobi, Murray, and Craftsman, among others.

This replacement blade adapter is an authentic OEM part for a riding lawn mower. The blade adapter is located in the lower deck of a lawn mower and connects the blade to the motor shaft. As the shaft rotates, it spins the adapter, causing the blade to rotate and cut grass. The adapter locks into place so that it doesn't come flying off during operation. The adapter is made of durable steel so that it is not easily damaged, but if the blade strikes something quite hard, it can break the adapter, causing the blade to spin unevenly, or even bending the motor shaft. If left unattended to, it can be dangerous for the operator, as the blade could potentially break off from the mower. Replacing the adapter can be a little finicky, as they are generally quite tightly locked into place. There are special adapter keys that make it easier to remove, but the same effect can be achieved with a screwdriver or a pair of pliers. This part is compatible with riding lawn mowers made by Husqvarna and Craftsman. It comes sourced from the original manufacturer and ships individually.

Flat washers have multiple applications in lawn mowers and tractors, but are used to add additional security to various screws and bolts. These are made of durable metal, but they can still become worn or damaged over time. The flat washer is a useful part that needs to be in working order at all times for the most effective operation of your lawn equipment. In some cases, they can become lost or damaged during other maintenance. Replacing them is easy with this OEM flat washer. Refer to the user manual for various applications and locations of this washer, as each unit will have its own specifications. Always follow manufacturer instructions for installing hardware like this flat washer replacement. This genuine OEM washer is manufactured to exact standards by Husqvarna. It is designed to be used with several brands of lawn and garden equipment engines, including Weed Eater, Husqvarna, Poulan, Poulan Pro, Craftsman/Sears, and Roper. The part is silver in finish and is sold individually. Order multiple quantities as needed.

This wheel assembly is a genuine Husqvarna part, sold individually. This wheel assembly can be used as a replacement part in a lawn mower. The purpose of the wheel assembly in a lawn mower is to make it possible for the operator to drive it across surfaces.The wheel assembly in a lawn mower might need to be replaced if the tread of the wheel or the metal components suffer from damage that cannot be fixed by a basic repair. If the wheel assembly is punctured, scraped, dented, cracked, warped, or eroded to the point of reduced or negated functionality, the wheel assembly should be removed and replaced by this genuine OEM replacement part while following the proper set of instructions sourced from a relevant appliance manual.This OEM part is a genuine replacement that is sold individually and sourced directly from the manufacturer. This wheel assembly is compatible with the following outdoor appliance brands: Husqvarna, Craftsman, and Poulan.