Dishwasher Module Dispenser Parts

This electronic control board is the main console controller that manages a range of appliance functions and restores responsive controls and displays. Replace a failing board to get timed cycles, settings and display feedback working again. What it does:

• Controls user interface, display and timed cycle logic for the appliance
• Sends signals to heating/motor components to start and stop operations
• Responds to touchpad or button inputs so selected settings run correctly
• Common symptom fixer: no display, unresponsive controls, or erratic cycle behavior
• Works with existing harnesses and sensors when compatible

• One electronic control board

• Disconnect power at the breaker or unplug the appliance before servicing
• Handle the board by the edges and avoid touching circuitry to prevent static damage
• Reconnect all wire harnesses in their original positions; loose connections can cause faults

A small replacement retainer clip used to secure exterior trim and interior panels on compatible Whirlpool appliances. Restores proper panel fit and prevents rattling or loose trim for a cleaner, safer operation. What it does

• Secures trim, panels or components in place to maintain proper alignment
• Helps stop rattling, vibration noise and loose-fitting parts
• Keeps seals and covers positioned so doors and panels close correctly
• Simple, single-purpose hardware used where a clip-style fastener is required

• One retainer clip as pictured

• Disconnect power (and water if applicable) before starting any repair
• Remove the surrounding trim or panel to access the retainer; small trim tools may help
• Fasten clip into the OEM mounting hole until it snaps or seats firmly
• Keep removed screws and small parts organized to avoid lost hardware

This electronic control module manages a range of oven/cooktop functions so the appliance responds correctly to front-panel commands and control inputs. Replacing a failed module restores normal control and display operation. What it does:

• Receives input from touchpads/knobs and sends signals to heating elements, relays, and sensors
• Controls oven timing, temperature setpoints, and cycle sequencing
• Powers or drives the display and indicator lights when working properly
• A failed module can cause unresponsive controls, blank or erratic displays, or interrupted heating cycles

• Disconnect all power to the appliance before starting work to avoid shock or damage
• Handle the board by its edges and avoid static discharge; wear a grounded wrist strap if available
• Verify connector orientation and seating; do not force connectors or components

This electronic control board replaces the refrigerator's main user interface control, restoring reliable temperature management and cycle sequencing. It lets the appliance receive user inputs and run timed defrost, compressor, and fan operations. What it does:

• Houses the control circuitry that manages cooling cycles, defrost timing and fan/compressor operation
• Responds to user input from the front control panel and translates commands to the appliance systems
• Can stop or reset erratic cycling, display control errors, or fix non-responsive controls when the board is faulty
• Common symptom: unresponsive control panel, incorrect temperatures, or failure to start compressor or defrost cycle

• High-level replacement only — disconnect power before accessing electrical components
• Handle the board by its edges and avoid static discharge; use an anti-static wrist strap if available
• Verify connectors are fully seated and wiring matches original locations before restoring power

The Electronic Control is an OEM part for Whirlpool dishwashers. It is responsible for controlling and coordinating the various functions of the dishwasher, including the wash cycles, water temperature, and timing.

Symptoms of a bad main control board include:

• The dishwasher not turning on or showing any signs of power.
• The dishwasher not completing a cycle or stopping mid-cycle.
• The control panel not responding to input or displaying error codes.
• The dishwasher not filling with water or draining properly.

A bad main control board can occur due to electrical malfunctions, component failure, or power surges. If you notice symptoms such as the dishwasher not powering on, cycle irregularities, or error codes displayed on the control panel, it may be time to replace the main control board.

This OEM Whirlpool part can also be used on Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore/Sears brand appliances.
 

This electronic control module assembly manages washer operations and user controls, restoring cycle selection, timing and electronic functions so the appliance responds correctly to commands and runs programmed cycles. What it does:

• Receives input from the console and sensors to start, stop and advance wash cycles.
• Controls timers, relays and valves for water fill, agitation and spin sequences.
• Drives display and user interface signals so cycle selections and status are shown.
• A failing module can cause the washer to not start, not respond to controls, or show error codes.

• Disconnect power before servicing to avoid shock or damage to the new board.
• Handle the module by its edges and avoid touching circuitry; use ESD precautions when possible.
• Verify connector orientation and seating; confirm wiring harnesses match before power-up.

This electrical control board manages an appliance's electronic functions and user commands, restoring proper cycle control and interface response. Replace a faulty control to stop erratic operation and regain reliable control of cooking or other timed functions. What it does

• Receives input from the console and executes selected cycles and settings
• Regulates cycle timing and communicates with sensors and relays to control heating or motor operations
• Helps prevent erratic or unexpected appliance behavior when functioning correctly
• Commonly linked to symptoms like unresponsive controls, error codes, or failure to start/complete cycles

• Disconnect power at the breaker or unplug the appliance before starting any work
• Handle the board carefully; avoid touching contacts and use anti-static precautions if available
• Verify wiring positions and take photos before disconnecting connectors for correct reassembly

Also order retainer part number WP3400918

The Cntrl-Elec is an OEM part for Whirlpool dishwashers. As the control and electronic component, it governs all of the major functions and operations of the dishwasher. The control board contains integrated circuits, microprocessors, and electronic components that facilitate cycles, temperature regulation, safety features, and user input.

Over time, the electronic components inside the controller can degrade or become damaged. Environmental factors like surges, fluctuations in power, and other electrical issues may also potentially cause failure. 

Symptoms of a bad controller can include:

• Not operating or cycling at all
• Inability to start or stop cycles
• Fault codes displayed
• Issues with heating or drying
• Buttons or control panel not responding

This genuine OEM Whirlpool part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.

The Detergent Dispenser is an OEM part for Frigidaire dishwashers. It dispenses the necessary doses of detergent at precisely timed intervals during cycle operation. 

Causes of dispenser malfunction stem from normal wear over extended use. Mineral buildup can accumulate inside inhibiting proper dispensing action. Mechanical or electronic components controlling release functions are also susceptible to failure.

Symptoms of a bad dispenser include:

• Dishes not getting completely clean after cycles
• Residual food or film left on dishware   
• Error codes related to detergent supply issues
• Leaks or spills from the dispenser area

This OEM Frigidaire part is also compatible with some Electrolux, Gibson, and Kenmore appliance models.