Dishwasher Upper Rack Roller Parts

The Dishrack Stop Clip is an OEM component specifically designed for Whirlpool brand dishwashers. This clip functions to hold the upper dish rack in place during washing cycles.

Symptoms of a bad dishrack stop clip can include:

• Movement or vibration of the upper dish rack during washing
• Visible damage, bending or broken tabs on the mounting clip itself  
• Inability to smoothly slide or remove the upper dish rack

Causes of a bad dishrack stop clip usually stem from normal wear and tear over extended use. Overtight loading of dishes could also put excessive stress on the clip.

This OEM Whirlpool part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and some Kenmore models.

This is a replacement dishwasher rack assembly with factory-installed wheels. It restores smooth sliding and safe loading when the original rack is bent, rusted, or missing rollers—helping the rack glide properly and keep items positioned during the wash.

• Holds and organizes dishes, glasses, and cookware during cycles
• Integrated wheels ride on the tracks for easy loading and unloading
• Replace if tines are rusted/broken, wheels are cracked or missing, or the rack derails
• Helps prevent items from tipping and maintains consistent spray coverage

• Disconnect power to the dishwasher before servicing
• Open the door, extend the rack, release any rail end-stops, and remove the old rack
• Transfer any removable accessories from the old rack to the new one, if needed
• Slide the new rack onto the rails and reinstall end-stops; verify smooth operation

The Rack Roller is an OEM component compatible with GE dishwashers. Located on the rack guide rails inside the washer tub, it facilitates smooth gliding of rack shelving in and out for easy loading and unloading. 

Causes of failure can include cracked/warped rollers from years of continual movement, accumulation of debris preventing free motion, or detachment of roller heads compromising installation.

Symptoms include:

• Difficulty fully extending or retracting racks  
• Off-tracking of shelving from left to right rails
• Scratches or damage to dishware from improper rack functioning 

This GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore models.

The Track is an OEM part for Whirlpool dishwashers. It serves as the track or rail that allows the dishrack to glide smoothly in and out of the dishwasher during loading and unloading. The track is precision-engineered to provide smooth, controlled movement of the dishrack. It includes all necessary mounting brackets and attachments to facilitate simple installation.

Causes of a bad track can include scratches, dents or other damage due to impact or repeated use over time. The roller or wheel components may also become worn down or jammed, hindering proper movement.

Symptoms of a bad track include:

• The dishrack not rolling out fully or getting stuck partway
• Scratching or scraping noises when moving the dishrack
• Difficulty pushing the dishrack in and out
• The dishrack tilting or becoming unbalanced during movement

This genuine OEM Whirlpool part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.

The Dish Rack is an OEM part for Whirlpool dishwashers. It provides an organized space within the dishwasher tub to evenly support washed items. Engineered with a durable construction and flexible supports, the dish rack accommodates a variety of plates, bowls, and utensils. 

Symptoms of a bad dish rack include:

• Cracks or other damage compromising its rigid structure
• Supports that are loose, missing, or deformed prevent even the placement of dishes
• Intermittent rattling noises emanating from the rack during the wash cycle

Causes can be regular use taking its toll over time, unbalanced loading subjecting it to unnecessary strain, or an accidental impact. Replace it with this genuine Whirlpool OEM dish rack to restore structured stability and optimize cleaning coverage for all loaded items.

This replacement dish rack is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and some Kenmore-branded dishwashers. Maintaining factory components ensures consistent performance from your dishwasher.

The Lower Dishrack Roller Assembly is an OEM part for Whirlpool dishwashers. As an integral component, the lower dishrack roller assembly supports smooth movement and positioning of the lower dishrack. Its precision ball bearings allow for effortless extension and retraction of the lower rack.

Causes of a bad lower dishrack roller assembly can include wear and tear of bearings over time, stripped or damaged rails, or failure of rollers due to excessive loading.  

Symptoms of a bad lower dishrack roller assembly include:

• Difficulty extending or retracting the lower dishrack  
• Noisy or stuck operation of the lower rack
• Rack failing to remain securely in place during wash cycles
• Dishes shifting or falling during wash due to uneven support

This OEM Whirlpool part is also compatible with KitchenAid, Jenn-Air, Amana, Kenmore, and some Maytag and GE dishwashers. 

This lower dishwasher rack replaces a worn, bent, or damaged lower basket to restore secure support for plates, bowls and cookware so dishes load and wash as intended. Durable finish helps protect items from chipping. What it does:

• Supports and organizes dishes on the dishwasher's bottom level for proper water coverage
• Restores missing or broken rack rails and tie-downs that can allow dishes to shift
• Reduces contact damage from sliding or collapsed rack areas
• Helps ensure proper drainage and spray access to bottom-rack items

• One lower rack

• Remove dishes and unplug or turn off power to the dishwasher before servicing
• Slide out and detach old lower rack; align new rack on bottom rails and test smooth travel
• Use gloves to avoid sharp edges and protect the rack's coating during installation
• No special tools typically required; inspect rollers and tracks and replace if worn

This rack assembly restores a sturdy, properly fitting rack inside your appliance so items are supported and move smoothly on the rails. Replace a bent, rusted, or missing rack to keep loading safe and performance consistent. What it does:

• Provides a stable surface for loading items during use
• Aligns with factory rails for correct fit and smooth in/out movement
• Replaces racks that are bent, warped, broken, rusted, or missing
• Helps prevent snags or stains caused by damaged or flaking rack wires

• One rack assembly

• Disconnect power; allow it to cool completely
• Pull the old rack straight out of the rails; if your model uses rack stops or clips, transfer them from the original
• Slide the new rack into the rails until fully seated
• Verify smooth travel and proper clearance before use

Wire rack assembly that restores stable support and spacing for cookware or dishes in your appliance. Replaces bent, worn, or damaged racks so items sit level and slide smoothly for safer loading and more consistent results. What it does:

• Provides sturdy support for cookware, bakeware, or dishes and maintains proper clearance inside the appliance.
• Ensures smooth sliding and correct positioning so racks don't bind, tilt, or drop when pulled out.
• Replaces bent or corroded wires that can catch, scratch, or allow items to tip.
• Helps restore even airflow and consistent performance where rack position affects cooking or cleaning.

• Remove all food, dishes, and loose parts before installing; allow the appliance to cool if recently used.
• Wear gloves to protect hands from sharp wire ends; handle the rack carefully to avoid bending.
• Slide the rack into the designated tracks or supports until it seats fully; verify rollers or stops are aligned.
• Follow the appliance owner's manual or OEM instructions for final adjustments and safe operation.

This tub wheel mounts to the dishwasher's inner tub wall and guides the rack as it slides in and out. Replacing a worn wheel restores smooth rack movement and helps prevent binding, derailing, and scraping.

• Attaches to the tub to support and guide rack travel
• Helps keep the rack aligned on its tracks for smooth operation
• Typical failure symptoms: rack hard to slide, rack jumps off track or tilts, scraping/grinding noises, cracked or missing wheel
• Restores proper glide and reduces strain on rack components

• Disconnect power and water supply before servicing the appliance
• Remove the rack for access; release the old wheel's clip/fastener from the tub and install the new wheel
• Ensure the wheel spins freely and the rack moves smoothly end-to-end
• Inspect other wheels and related hardware and replace as needed for even wear

The Dishrack Roller Assembly is an OEM part for LG dishwashers. This assembly features wheels that the upper dishrack glides on smoothly during each wash cycle.

Causes for a bad assembly can include worn or damaged rollers that do not spin freely. Over time and prolonged use, harsh detergents may also corrode roller mechanics.

Symptoms of a bad dishrack roller assembly include:

• The upper dishrack getting stuck and not fully extending
• Difficulty loading or unloading the top rack
• Excess friction causes noisy operation

Scratches or damage to dishes from tight rollers
This OEM LG part is also compatible with some Kenmore models.

This mounting bracket secures a small appliance component in place to restore proper alignment and stable operation. It provides a simple, durable replacement for worn or broken mounting points. What it does:

• Secures internal components or assemblies to the cabinet or frame to prevent movement
• Restores proper alignment so linked mechanisms operate smoothly
• Helps stop rattling or loose parts that occur when the original holder breaks
• Fits in the original mounting location and works with the appliance's factory hardware

• One replacement holder/mounting bracket as pictured

• High-level replacement — typically accessed by removing the related cover or panel
• Use appropriate hand tools; keep fasteners organized for reassembly
• Disconnect power (unplug appliance or shut off circuit) before starting any repair