Dryer Flat Top Burner Parts

This trim ring is a replacement surface trim piece that restores the finished look and edge around the appliance opening. It provides a clean, secure edge and replaces bent, cracked, or missing trim to improve appearance and fit. What it does

• Covers and finishes the exposed edge of the appliance opening for a clean appearance
• Secures and aligns adjacent components by providing a stable mounting edge
• Addresses cosmetic damage such as dents, cracks, or paint loss around the opening
• Helps prevent small items from getting caught in the exposed edge

• One trim ring

• Disconnect power to the appliance before starting any repair
• Removal typically requires loosening mounting screws or clips; keep hardware for re-use unless damaged
• Handle edges carefully; part and surrounding metal may be sharp
• If the trim mounts to or around other components (elements, panels), support those parts during removal and reinstallation

This gas valve and pipe assembly controls and routes natural gas from the appliance inlet to the burner manifold, restoring proper fuel flow for ignition and stable burner operation. Designed as a direct-replacement service part. What it does

• Regulates and directs gas flow from the inlet to the oven/range burners.
• Enables proper ignition and stable flame for baking and broiling cycles.
• Works with the appliance's existing manifold and burner orifices to maintain correct gas delivery.

• Turn off gas supply and disconnect power before servicing; follow all safety procedures.
• After installation, check all fittings for leaks with an approved gas leak test (do not use an open flame).
• Replace only with the exact part specified for your appliance; inspect connections and gaskets and tighten to manufacturer torque specs.

This connector restores a secure electrical connection between wires in the appliance, helping return reliable power and control to the affected circuit. It's a direct replacement designed to match the OEM fit and function. What it does:

• Joins two or more wires to complete an electrical circuit
• Replaces damaged, corroded, or loose terminals that cause intermittent power or control failures
• Provides a stable connection to reduce arcing and heat build-up at the joint
• Useful when visual damage or burnt insulation is present on the original connector

• Disconnect power to the appliance before servicing to avoid shock or injury
• Confirm wire colors and orientation before removing the old connector to ensure correct reassembly
• Use proper crimping or connector tools per OEM guidance; do not rely on loose twisting or temporary fixes
• If wiring or insulation is damaged beyond the connector, inspect and repair the harness.

This Valve & Burner Assembly is an OEM part for GE dryers. Responsible for controlling the flow of gas to the burner where it is ignited to produce heat. This assembly ensures that the dryer heats up efficiently and safely, playing a vital role in the overall performance and reliability of the appliance. 

The need for replacement can stem from wear and tear, functional degradation, or issues with gas flow regulation.

Symptoms of a faulty Valve & Burner Assembly include:

• Insufficient or no heat production in the dryer.
• Unusual noises or smells indicating gas leakage or improper combustion.
• The dryer takes longer to dry clothes, indicating inefficient heating.
• The dryer failed to start the heating cycle.
• Visible signs of wear or damage to the assembly components.

This GE OEM replacement part is also compatible with Hotpoint, RCA, and some Kenmore models.
 

This cabinet cover assembly is the outer panel that protects internal components and restores the appliance's exterior appearance. It provides a clean, secure enclosure to help keep parts safe and the unit looking factory-fresh. What it does:

• Covers and protects internal wiring, controls, and components from dust and incidental contact
• Restores the appliance's exterior look after damage or wear
• Helps reduce air flow and light into internal compartments, supporting normal operation
• May reduce vibration noise by providing a secure outer enclosure

• Disconnect power to the appliance before beginning any service
• Handle the panel carefully—edges may be sharp; wear gloves and eye protection
• Basic hand tools typically required; follow the appliance's service manual for exact removal/installation steps

A replacement top plate assembly that restores the cooktop surface and mounting for burners and controls, returning a smooth, stable cooking area. Helps protect internal components and maintains proper burner alignment. What it does

• Replaces a cracked, chipped, or warped cooktop top to restore a flat, stable cooking surface
• Provides the mounting surface for heating elements and control assemblies so burners sit correctly
• Prevents debris from dropping into internal cavities that can affect operation or create odor/smoke
• Helps maintain proper spacing and alignment for consistent heating performance

• One top plate assembly

• Disconnect power at the breaker before starting any repair to avoid shock hazard
• Handle the plate carefully—edges and glass sections can be sharp or brittle; use gloves and eye protection
• Installation typically requires removing the cooktop or range surface and unplugging element/connectors; keep screws and hardware organized

This gas burner replaces a worn or damaged surface burner to restore even flame heat for stovetop cooking. It's a direct-fit replacement designed to match the original burner's shape and performance. What it does:

• Provides a stable gas flame for cookware heating and simmering
• Restores even heating when an existing burner produces weak or uneven flames
• Replaces burners that are cracked, warped, or not lighting reliably
• Works with compatible cooktop ignition and valve systems

• One gas surface burner

• Disconnect gas and power to the appliance before beginning any repair
• Handle components carefully to avoid bending or damaging the burner ports
• Use proper tools and follow the appliance manufacturer's service instructions

This gas burner replaces a worn or damaged surface burner to restore proper flame for cooking. It provides a direct replacement burner head that channels gas to the burner ports for consistent heat transfer. What it does:

• Directs gas to the burner ports so the cooktop produces an even, controllable flame
• Replaces corroded, clogged, or damaged burner heads that cause weak or uneven heating
• Helps resolve symptoms such as a burner that won't light, produces a sputtering/uneven flame, or heats poorly
• Works with the factory burner cap and ignition system to restore normal operation

• Turn off gas supply and disconnect power to the appliance before servicing
• Remove grates and burner cap to access mounting screws or clips; match orientation to original part
• Inspect and clean surrounding ports and igniter area before installing replacement

This rear panel replaces the back cabinet cover on compatible Whirlpool dryers, protecting internal components and helping direct vent airflow. It restores a secure, finished exterior and keeps wiring and controls shielded. What it does:

• Covers and protects the dryer's internal components at the rear, including wiring and control assemblies
• Helps maintain proper venting path and airflow by providing the correct rear opening and mounting surface
• Prevents debris, pets, and accidental contact with internal parts
• Stops rattling or flexing caused by a bent or damaged back panel

• Disconnect power (and gas supply on gas models) before starting any repair
• Remove the dryer from the wall and disconnect the vent to access and replace the rear panel
• Use appropriate hand tools to remove and reinstall mounting screws; retain hardware if reusing
• Handle edges carefully to avoid cuts; secure all fasteners before returning dryer to service