Dryer Basket Silverware Arm Parts

This idler assembly keeps the dryer drum belt tensioned so the drum turns smoothly for efficient drying. Replaces a worn or noisy idler to restore proper belt tracking and reduce squeaks or grinding. What it does:

• Provides tension and routing for the dryer drive belt so the drum rotates correctly
• Helps prevent belt slippage, uneven tumbling, and poor drying performance
• Stops noise caused by a worn or seized idler pulley (squealing, grinding)
• Supports consistent drum alignment to reduce wear on the belt and motor

• Disconnect power to the dryer before starting any repair
• Basic hand tools required; access typically through front or lower access panel
• Inspect the dryer belt and replace if cracked or frayed while idler is changed

This rear support assembly stabilizes the appliance's rear housing and helps keep internal components aligned for smooth operation and reduced vibration. It restores proper rear-end support to prevent rubbing, noise, and uneven motion. What it does:

• Provides a stable mounting point for the appliance's rear section to maintain alignment
• Reduces vibration and rattling caused by a loose or worn rear support
• Helps prevent rubbing, scraping, or grinding noises from misaligned components
• Restores proper fit between the rear housing and moving parts to promote smooth operation

• One rear support assembly

• Disconnect power (and gas if applicable) before beginning any repair
• Access typically requires removing the appliance's rear panel or cabinet; follow OEM service manual steps
• Inspect surrounding mounting hardware and replace any worn fasteners for a secure fit

This idler pulley guides and maintains tension on the dryer drive belt so the drum spins smoothly and quietly. Replacing a worn pulley restores proper belt tracking and helps prevent belt wear or breakage. What it does:

• Maintains correct tension and alignment of the drive belt
• Reduces squealing or grinding noises from a worn pulley bearing
• Prevents belt slipping and uneven drum rotation
• Helps avoid premature belt wear or burning rubber smells

• Disconnect power to the appliance before starting any work.
• Access may require removing the dryer front or cabinet panels and releasing the belt; follow your model's service instructions.
• Inspect the belt and drum support for wear and replace if needed while servicing.
• Use basic hand tools.

This bulkhead is the front structural panel that supports the dryer drum and seals the front of the cabinet to maintain proper airflow and drum alignment. Replacing a worn bulkhead restores stable drum rotation and prevents air leaks. What it does:

• Supports the drum and front bearing to keep the drum centered and turning smoothly
• Seals the front cabinet to direct exhaust airflow through the blower and vent
• Reduces rubbing and vibration caused by a damaged or warped bulkhead
• Helps eliminate airflow leaks that can extend dry times or cause overheating warnings

• One bulkhead

• Disconnect power (and gas supply if applicable) before any service
• Service typically requires removing the dryer front panel and drum for access
• Inspect and replace any worn gaskets, bearings, or fasteners while replacing the bulkhead

This replacement dryer drum restores the rotating drum that holds and tumbles clothes during drying, helping ensure proper airflow and even drying. It's a direct-fit exterior rotating drum used in compatible Whirlpool-family dryers. What it does:

• Replaces a cracked, dented or warped drum that can catch or damage clothing
• Restores smooth tumbling to reduce noise and fabric snags
• Maintains proper airflow path for efficient drying performance
• Works with existing rollers, bearings and seals when those components are serviceable

• High-level task: remove cabinet and front bulkhead to access and swap the drum; follow your model-specific service manual
• Disconnect power (and gas supply for gas dryers) before starting any repair
• Inspect and replace worn rollers, glides, seals or bearings as needed—this drum typically does not include those components

This base shaft is the support shaft that helps the washer's tub or drum stay aligned and rotate smoothly. Replacing a worn shaft restores proper drum support and reduces noise, wobble, and uneven operation. What it does:

• Provides a stable pivot and support for the tub/drum during operation
• Transfers rotational force from the drive components to the drum assembly
• Prevents excessive wobble, vibration, and metal-on-metal contact when intact
• Worn or damaged shafts can cause noise, drum misalignment, or premature bearing wear

• Disconnect power and water supply before servicing; follow all safety precautions
• Replacement typically requires removing the cabinet and drum assembly for access
• Inspect adjacent bearings, seals, and mounting hardware and replace if worn
• Use appropriate tools and follow the OEM service manual

This tub cover replaces the outer tub housing panel and helps protect internal wash components from water and debris while maintaining proper drum alignment. It restores the appliance cabinet integrity and supports reliable washer operation. What it does:

• Covers and protects the washer's outer tub and internal components from splashes and foreign objects
• Helps maintain proper spacing and support for the wash drum
• Can reduce water leakage paths around the tub area when installed correctly
• Addresses symptoms such as visible damage to the tub housing, loose or sagging tub trim, or water spray reaching internal components

• One tub cover

• Disconnect power and water before starting any repair
• Remove the washer cabinet or front panel as required to access the outer tub; refer to model-specific service instructions
• Inspect surrounding seals, fasteners, and mounting clips and replace any damaged pieces

This is a drum assembly intended for use with dryers. This part can be found inside the dryer and is responsible for holding clothing while a cycle is running. It holds wet laundry while loading the appliance. Over time and with use, the drum assembly can start to wear out. This can cause the dryer to squeal, start and stop during a cycle, make buzzing noises, or seize up.If the drum assembly is damaged, it will need to be replaced. Make sure to have basic tools and a pair of work gloves ready. The dryer should be turned off and unplugged from the wall. Raise the top panel, remove the front panel, and then remove the drum. The drum support roller should be taken out and installed on the new drum. Reinstall with the new component and reassemble all parts before use.The drum assembly is made to be used with dryers and washer/dryer combos from Inglis, Estate, Admiral, Crosley, Roper, Magic Chef, Amana, KitchenAid, Maytag, Kenmore, and Whirlpool. It is a genuine OEM replacement part that is sourced directly from the manufacturer. The part is sold on an individual basis.

This adapter connects the appliance's water supply line to the inlet fitting, providing a secure watertight connection to restore proper water flow. Use it when the original coupling is damaged, cracked, or leaking. What it does:

• Adapts and secures a water supply/hose to the appliance inlet fitting.
• Restores a proper connection to prevent leaking at the hose junction.
• Addresses symptoms such as visible leaks, intermittent water flow, or a loose hose connection.
• Works as a direct replacement for a damaged or corroded inlet adapter.

• Turn off water supply and unplug the appliance before installing.
• Inspect seals and replace any damaged washers or O-rings; tighten fittings by hand then snug with an appropriate tool—do not overtighten.
• Check for leaks after restoring water and power; re-tighten if necessary.

This motor drive pulley guides the dryer drive belt and helps transfer motor power to the drum for proper rotation. Replacing a worn or damaged pulley restores smooth drum movement and reduces noise. What it does:

• Guides and supports the drive belt so the drum turns evenly
• Maintains belt alignment to prevent slipping or excessive wear
• Reduces squealing or grinding caused by a damaged pulley bearing
• Helps restore normal tumbling when the drum drags or hesitates

• One motor drive pulley

• Disconnect power to the appliance before any service; follow lockout/tagout best practices
• Inspect the drive belt and bearings while replacing the pulley; replace worn belt or bearings as needed
• Typical service requires basic hand tools and access to the dryer cabinet or motor housing

The Dryer Drum Roller Assembly is essential for maintaining the smooth operation of your dryer. This genuine OEM part ensures that your dryer drum rotates effortlessly, reducing noise and minimizing vibration during each drying cycle. Designed specifically for Samsung dryers, the Dryer Drum Roller Assembly provides a precise fit, enhancing the overall stability and performance of your appliance. By replacing worn or damaged rollers with this high-quality assembly, you can extend the lifespan of your dryer and prevent further wear on other components. Installation is straightforward, allowing you to restore your dryer's efficiency quickly and easily. With the Dryer Drum Roller Assembly, youGÇÖll experience quieter operation and more consistent drying results, improving your overall laundry experience. Choosing a genuine OEM part guarantees compatibility and reliability, ensuring that your Samsung dryer functions optimally. Invest in the Dryer Drum Roller Assembly to maintain the integrity of your appliance and enjoy the benefits of a well-functioning dryer for years to come.