Dryer Control Panel Lcd Parts

This electromechanical timer assembly controls cycle timing for compatible GE ranges and ovens, restoring accurate cook cycles and timer functions. It replaces a worn or non-advancing control to help your appliance complete timed operations reliably. What it does:

• Advances and times cooking cycles so bake, broil and self-clean operations run to completion
• Restores timer and manual cycle control when the original timer stops advancing
• Helps resolve symptoms like no timer display, oven cycles that won't start or stop on schedule, or intermittent timing failures
• Works as the user-accessible timing control for front-panel settings

• Disconnect power to the appliance before beginning service to avoid shock hazard
• Access may require removing the range/oven control panel or console; keep fasteners and trim for reassembly
• Handle connectors carefully and match wiring/location during reinstallation

This mechanical oven timer restores simple dial-based timing and end-of-cycle alerts so you can set cook times and receive audible reminders. It replaces a worn or non-advancing timer to bring back reliable basic timing functions. What it does:

• Advances and times cook/clean cycles so the oven rings when a set time ends
• Restores manual timing when the clock/timer no longer advances
• Replaces a timer that fails to sound the end-of-cycle buzzer
• Provides a direct, dial-based alternative to electronic controls on compatible units

• Always disconnect power to the appliance before beginning service
• Access typically requires removing the control panel or console; support the console while detaching the timer
• Align the timer shaft and knob carefully during installation to avoid damage

This main electronic control board manages a refrigerator's key functions, translating user commands and sensor signals into compressor, defrost and lighting operation for reliable daily performance. What it does:

• Receives inputs from the user interface and sensors, then controls compressor, fans and defrost cycles.
• Regulates cooling cycles to help maintain set temperatures.
• Powers and communicates with the display and status lights.
• Can cause symptoms such as a blank display, unresponsive controls, continuous run/overcooling, or intermittent cooling when failing.

• Disconnect power to the appliance before starting any repair to avoid shock or damage.
• Handle the board carefully and avoid electrostatic discharge; use proper grounding.
• Verify connectors and mounting location match your appliance before installation.

This mechanical timer controls the dryer's cycle timing and advances program selections so cycles start, run and end as intended. Replaces a worn or non-advancing timer to restore proper cycle sequencing and timing. What it does:

• Advances drying cycles and sends signals that engage heat and motor circuits
• Restores proper cycle progression
• Helps resolve issues like no timed drying, stalled cycles, or incorrect cycle sequencing
• Works with mechanical dial-style control panels that use a rotary timer mechanism

• Disconnect power before attempting replacement to avoid shock or injury
• Access may require removing the control panel or top — handle internal parts carefully
• Verify cabinet fasteners and wire connector seating before reassembly

This replacement timer plastic shaft restores the control knob connection on compatible GE appliance timers so the timer advances and settings stay engaged. Simple, low-cost fix when the original shaft is cracked, stripped, or broken. What it does:

• Replaces the damaged or worn plastic shaft that connects the control knob to the timer mechanism.
• Restores positive knob engagement so the timer advances and selected cycles run.
• Helps eliminate symptoms like a spinning or slipping knob, inability to change timer settings, or intermittent timer control.
• Intended for mechanical/electromechanical control timers that use a plastic shaft interface.

• Disconnect power before servicing to avoid shock or injury.
• Remove the control knob and access the timer per your model's service instructions; handle internal components gently.
• Align the shaft correctly with the timer mechanism and knob splines; do not force parts—inspect for additional damage to the timer or knob.

This mechanical selector timer controls the wash cycle sequence and timing, restoring reliable cycle advancement and automatic transitions. It replaces a worn or non-advancing control to bring consistent cycle timing back to the appliance. What it does:

• Advances washer cycles and engages appropriate motor and valve circuits at set intervals
• Ensures timed transitions between fill, agitate, drain and spin stages
• Commonly needed when cycles won't advance, stop mid-cycle, or settings don't change
• Works as the electro-mechanical clock/controller that coordinates cycle operations

• One mechanical timer assembly

• Disconnect power before attempting service to avoid shock or injury
• Removal typically requires access to the control panel and disconnecting wiring harnesses; note wire locations or take a photo before removing
• Handle the timer gently; install only if identical to the original and fully secured before restoring power

This main electronic control board manages the appliance's user interface and core functions, restoring responsive controls and proper operation when the original board fails. What it does:

• Receives and processes commands from the control panel so buttons and displays respond correctly
• Communicates with sensors and other modules to manage temperature, timing, and cycle functions
• Powers relays and outputs that control motors, heaters, valves, or compressors depending on appliance type
• Replaces a failed or intermittent board that causes error codes, an unresponsive display, or inconsistent operation

• Disconnect power to the appliance before starting work to avoid electric shock
• Handle the board carefully; avoid touching components and use anti-static precautions
• Verify the part number on the existing board and the appliance wiring harness match before installation

This back assembly is the factory-style rear cabinet panel that protects and supports internal components. It restores the appliance's structural rear cover and helps keep internal parts safe from debris and damage. What it does

• Replaces a damaged or missing rear cabinet panel to protect motors, wiring and electronics
• Restores mounting points for components that attach to the back of the cabinet
• Helps reduce air flow loss and limits access to internal parts that can cause shorts or damage
• Common symptoms: visible dents or holes in the back panel, loose or rattling rear cover, or exposed components

• Disconnect power to the appliance before beginning any repair
• Installation typically requires basic hand tools; handle edges carefully
• Keep screws and fasteners from the original panel for re-use unless replacements are supplied

This main power board assembly supplies and regulates the appliance's primary electrical power and controls core functions for reliable operation. Replacing a failed board restores power distribution and control response. What it does

• Distributes and regulates incoming power to control circuits and major components.
• Provides the control signals that enable start/stop cycles and user interface responsiveness.
• Failsafe symptoms include no power to the appliance, unlit display or controls, or complete failure to start.
• Intermittent power, unexpected shutdowns, or certain error codes can indicate a faulty board.
• Works in conjunction with door switches, thermal fuses, and other safety devices.

• Disconnect electrical power before servicing to avoid shock or damage.
• Observe ESD precautions; handle the board by its edges and avoid touching components.

This mechanical dryer timer controls cycle sequencing and timing for compatible Frigidaire-style electric dryers, restoring proper cycle advancement and user-selected timing. Fits as a direct-replacement timing/control module. What it does:

• Advances the dryer through timed cycles and user-selected settings
• Routes power to components per cycle position
• Helps correct symptoms like cycles that won't advance, no change between settings, or a stuck timer knob
• Replaces a worn or non-rotating timer mechanism that prevents normal dryer operation

• Disconnect power at the breaker or unplug the dryer before service
• Handle the control and timer gently; avoid bending terminals or stressing wiring
• Verify knob alignment and cycle indexing during reassembly
• Refer to the dryer service manual or wiring diagram for exact hookup and safety procedures

This main electronic control board manages refrigerator functions and restores user control to the appliance. Replaces a failed board to return digital controls, cycles, and timed components to normal operation. What it does:

• Receives and processes user inputs from the control panel and directs functions like cooling cycles and defrost.
• Controls compressor, fans, and defrost timing so the refrigerator maintains proper temperature regulation.
• Powers and updates the display and user interface; often replaced when the display or buttons become unresponsive.
• Common symptom fix: intermittent or complete loss of control panel response, erratic cooling behavior, or failure to initiate defrost cycles.

• One main electronic control board

• Disconnect power to the appliance before beginning any repair to avoid electric shock.
• Handle the board by the edges and avoid static discharge; wear an anti-static wrist strap if available.
• Verify connector orientation and seating before restoring power; do not force connectors.

This replacement control panel restores the appliance's front console and user interface so buttons and the display work reliably. It provides the visible face and mounting surface for controls and status indicators. What it does:

• Houses the appliance's buttons, touchpads, and display area so you can select settings and see status
• Replaces cracked, scratched, or cosmetically damaged panels that affect appearance or button access
• Helps when buttons are unresponsive due to a damaged front panel
• Restores a clean mounting surface for switches and overlays

• Disconnect power before starting any repair to avoid shock or injury
• Remove trim, bezels, or mounting screws as needed to access the panel; keep fasteners for reassembly
• Handle carefully to avoid scratching or cracking; use proper tools to release clips

This rear panel replaces the cabinet back on compatible Whirlpool appliances to protect internal components and close the cabinet for proper airflow and safety. It restores the appliance's enclosure and keeps wiring and controls covered. What it does:

• Covers and protects internal parts at the back of the appliance from dust and physical damage
• Helps maintain proper airflow paths for cooling and ventilation
• Restores the appliance cabinet for a finished appearance
• Can reduce vibration-related noise by securing rear components

• One rear panel as described

• Disconnect power (unplug or shut off breaker) before starting any repair
• Remove access panels and mounting screws to replace the rear panel; retain hardware
• Handle sharp edges carefully and wear gloves to avoid cuts
• Note wiring or components are tucked to the panel, their routing before removal and restore exactly

This electromechanical timer controls the appliance's cycle sequencing so wash/dry cycles advance and complete as expected. Replacing a faulty timer restores proper cycle timing and program changes for consistent operation. What it does:

• Advances and times cycle steps so selected programs run in the correct order
• Interfaces with selector and motor to start, stop, and change cycles
• Can fail and cause symptoms like cycles not advancing, no power to cycles, or stuck on one setting
• Works with the appliance's existing wiring and mounts in the original timer location

• One electromechanical timer

• Disconnect power before starting any repair to avoid electric shock
• Access may require removing the console or control panel; keep fasteners organized
• Note wire locations or take a photo before disconnecting connectors for correct reassembly

This display assembly powers and visually reports the appliance control status so you can see settings and feedback on the control panel. It restores readable on-screen information and enables the front-panel display functions. What it does:

• Replaces the control-panel LCD and power/display electronics so the screen lights and shows information again
• Commonly used when the display is blank, dim, flickering or showing garbled characters
• Resolves unresponsive or intermittent front-panel display behavior tied to the display module
• Interfaces with the main control board to present time, temperature, and mode/status readouts

• One complete display assembly (power/LCD) as shown

• Disconnect power to the appliance before beginning any work to avoid shock
• Handle the LCD and cable connectors carefully to avoid damage; flexing or scratches can affect operation
• Access typically requires removing the control console or console bezel—keep track of screws and fasteners
• If symptoms persist after replacement, test the main control board and wiring harness for faults