Refrigerator Control Panel Lcd Parts

This genuine OEM part is a temperature control thermostat for refrigerators. The temperature control thermostat is the part that regulates and adjusts the temperature settings of the refrigerator. If the refrigerator is no longer maintaining the desired temperature settings, not cooling, or otherwise not operating properly, it will need to be replaced. To replace this part, make sure the refrigerator is unplugged. After unplugging, proceed to open the refrigerator door and remove all the interior shelving. Once removed, proceed to unmount the screws that hold the interior panels in place. Once loosened, remove the panels to access the temperature control thermostat. After locating the part, unthread the mounting screws that secure the thermostat to its housing. After unthreading, pull the old thermostat out and remove the wire harness that it is attached to. Replace it with the new thermostat and proceed to reinstall the interior panels of the refrigerator. This replacement part is sold individually and is compatible with Frigidaire, Electrolux, Gibson, Kelvinator, and Westinghouse brand refrigerators.

This dispenser module controls the refrigerator's ice and water dispensing functions and user interface. Replace a failed module to restore responsive dispensing, indicator lights, and consistent operation at the dispenser.

• Interprets button/paddle inputs and manages dispenser functions
• Coordinates ice and water dispensing operations
• Controls dispenser indicator lights/display for user feedback
• Failure can cause no dispense, unresponsive controls, or erratic/loss of lights

• Disconnect power and shut off water supply before service
• Remove the dispenser trim/panel carefully to access the module; protect against static discharge
• Note wire positions; transfer connectors and any reusable covers/overlays from the original part if applicable
• Restore power and test ice and water dispensing after installation

Color: clear. It measures about 12 inches wide by 6-1/2 inches high.

This mullion articulation assembly mounts on the fresh food door and flips out to form the center seal between French doors, helping the refrigerator close properly while reducing air leaks and moisture at the door gap.

• Flips between doors to create the center mullion seal in the fresh food compartment
• Helps maintain proper door alignment and smooth closing
• Damage or wear may cause poor sealing, condensation or frost at the center, or temperature issues
• Common clues include a broken hinge/pivot, warped or loose rail, or a flipper that sticks

• Disconnect power before servicing
• Remove door bins/shelves for access, then take out the screws or clips securing the old mullion; note orientation
• Position the new assembly, transfer any caps/fasteners if needed, and tighten securely
• Close both doors to ensure the flipper moves freely and the center seal is even

This refrigerator electronic control board manages key cooling and defrost functions. Replacing a failed board helps restore accurate temperature regulation and responsive operation so the appliance runs as designed.

• Regulates compressor and fan operation based on temperature sensor inputs
• Controls the automatic defrost cycle to prevent frost buildup
• Coordinates signals to the user controls/display and other components
• Common failure symptoms: not cooling or intermittent cooling, unit won't run, excessive frost/ice, unresponsive or erratic controls

• Disconnect power to the appliance before service
• Use anti-static precautions; handle the board by the edges only
• Photograph wiring; move connectors one at a time to the matching terminals on the new board
• Ensure all connectors are fully seated before reassembly and testing

The Refrigerator Main PCB Assembly is essential for ensuring your Samsung refrigerator operates smoothly. This main PCB assembly controls all the critical functions of your appliance, including temperature regulation, defrost cycles, and display indicators. By replacing a faulty main PCB with this genuine OEM part, you can restore your refrigeratorGÇÖs performance and reliability without compromising on quality. Designed specifically for Samsung refrigerator models, this part guarantees a secure fit and seamless integration with your existing system. The Refrigerator Main PCB Assembly enhances the overall functionality of your fridge, ensuring that all features work correctly and efficiently. Whether your refrigerator is experiencing erratic behaviors, temperature issues, or display malfunctions, this genuine OEM part provides a dependable solution. Easy to install, it allows you to perform the repair yourself, saving time and reducing the need for professional service. Invest in the Refrigerator Main PCB Assembly to maintain the optimal performance of your Samsung refrigerator and enjoy a consistently fresh and well-functioning appliance.

This electronic control board regulates power and coordinates your appliance's operations. Replacing a failed board can restore reliable performance when the unit is unresponsive, behaves erratically, or repeatedly shows error conditions.

• Regulates and distributes power to key components per the control logic
• Processes signals from sensors and user controls to execute functions
• Coordinates timing and operation of cycles/features
• Common failure signs include: won't power on or start, unresponsive controls, intermittent shutdowns, blank/flickering indicators, or recurring error codes

• Disconnect power before servicing; verify no voltage is present
• Use ESD protection and handle the board by its edges
• Photograph wiring and move connectors one at a time to the matching keyed terminals
• Mounting points and setup can vary; some models may require service-mode checks or initialization after installation

This mechanical defrost timer controls the refrigerator's automatic defrost cycle, clearing frost from the evaporator and helping maintain stable temperatures. Replacing a faulty timer restores regular defrost intervals to prevent frost buildup and inconsistent cooling.

• Cycles the system between cooling and defrost at set intervals to remove frost from the evaporator coils
• Heavy frost on the freezer back wall or evaporator cover may indicate a failed timer
• Fresh food section warming while the freezer seems cold, or unit stuck in defrost with no cooling
• Compressor runs continuously or never restarts; timer does not advance as expected

• Disconnect power before servicing to avoid electrical shock
• Access location varies by model; commonly in the control housing, behind the kick plate, or at the rear near the compressor
• Photograph or label wiring and transfer wires one at a time to the matching terminals
• Mount securely, restore power, and confirm normal cooling/defrost operation

This temperature control thermostat senses cabinet temperature and cycles the cooling system to match your set point. Replace it to restore consistent, adjustable cooling when the original control is worn or unresponsive.

• Senses cabinet temperature and opens/closes internal contacts to regulate cooling
• Cycles the compressor to maintain the selected coldness
• Common symptoms of failure: too warm or too cold, runs continuously or won't start
• Temperature knob has little/no effect or causes erratic temperature swings

• Disconnect power to the appliance before servicing
• Photograph/label wiring; transfer leads one at a time to matching terminals
• Reinstall and secure the sensor/control in its original location; avoid sharp bends or damage
• Set to mid-range and allow up to 24 hours for temperatures to stabilize after replacement

This is a refrigerator control board. It makes sure all the appliance processes run as expected. It links up with other internal parts to ensure the correct level of cooling. The part is made of durable materials and includes a small display. This offers information to users about the current temperature inside the refrigerator. The screen can crack or internal parts of the control board can become damaged. This can cause the refrigerator to stop cooling or running entirely.If the control board is damaged or not working correctly, it should be replaced. First, access the back of the appliance and unplug it from the wall. Remove the screws that hold on the cover to work with the control board. Make notes about where the wires are connected before removing the board. The new replacement part should have the wires reconnected in the same locations. Replace the cover and turn the power back on.The control board is compatible with several refrigerators made by Frigidaire. It is sold on an individual basis and sourced directly from the manufacturer. This is a genuine OEM replacement component.

This defrost timer cam replaces the plastic cam on a mechanical defrost timer. It restores the timer's changeover between cooling and defrost, helping prevent frost buildup on the evaporator and temperature swings inside the refrigerator.

• Mounts on the timer shaft to actuate the internal switch between cooling and defrost
• Helps resolve issues like heavy frost on the evaporator, warm fresh food section, or a unit stuck in defrost/run
• Corrects timer advancement problems caused by a stripped, cracked, or missing cam
• Typically installed with the defrost timer in the control housing or rear service area

• Disconnect power before servicing
• Access the defrost timer and note the original cam's orientation for reference
• Remove any retainer, pull the old cam straight off, and press the new cam fully onto the shaft without forcing
• Reassemble, then manually advance the timer to confirm it switches modes before restoring power

Replace a failed refrigerator control board to restore dependable operation. This electronic board supplies the logic and switching for the features it manages, helping eliminate intermittent or unresponsive behavior and returning the appliance to consistent, predictable performance.

• Interprets inputs from sensors and switches, then controls connected components through onboard relays
• Coordinates timing and operation of the functions this board manages
• Can correct erratic cycling or unexpected shutdown of controlled functions

• Disconnect power to the refrigerator before servicing
• Use ESD protection; handle the board by the edges and avoid touching components
• Access location varies by model; transfer connectors one at a time to the new board and secure in the original mounting
• Restore power and allow the unit time to resume normal operation

This is a refrigerator control board that can be used to replace a damaged or faulty board in select refrigerators. The control board is used to manage various functions that occur in the refrigerator, including cooling and defrosting. If there is a problem with the board, the refrigerator might not be able to defrost correctly, or it might not stay cool.The control board for the refrigerator tends to last a long time. However, it could eventually wear out and stop working. It could be damaged due to a voltage surge, or it might be a faulty board. Remove and store all food in the refrigerator and unplug it before beginning repairs.This refrigerator control board works with certain models from Kenmore, Whirlpool, KitchenAid, Roper, Estate, Inglis, Crosley, Gladiator, Kirkland, and Maytag. It's sold individually and is a genuine OEM replacement.

The Inverter Board is an OEM component for Frigidaire side-by-side refrigerators. As the main processing module, this board oversees all cooling functions through electronic control. It regulates temperatures, defrost cycles, and diagnostic alerts.

Causes of failure involve water intrusion degrading circuits over years, along with individual electronic parts stress-worn from prolonged daily use. Insufficient ventilation traps too much heat around delicate components.

Symptoms consist of:

• Cooling and freezer compartments failing to reach set temperatures
• Defrost issues causing ice buildup  
• Error codes or fault messages appear frequently
• Complete cooling failure and inability to power refrigeration 

This Frigidaire OEM replacement is compatible with select models from Frigidaire, Electrolux, and Sears/Kenmore models utilizing the same system design.

The Refer sum module is an electrical control module for GE refrigerators that helps manage monitored functions and restores normal operation when the original module fails. Replacing this module can resolve intermittent or nonworking refrigerator systems. What it does:

• Controls and coordinates monitored refrigerator functions tied to the module
• Corrects symptoms such as intermittent operation, failure to start, or unresponsive components
• Helps eliminate faults caused by a failed control module that interrupt normal cycles
• Works with existing wiring and connectors to restore the appliance's designed control functions

• Disconnect power to the refrigerator before beginning any work to avoid shock or equipment damage
• Handle the module by its edges and avoid contact with circuit traces; protect against static discharge
• Reconnect all wiring harnesses securely; do not force connectors

The Dispenser Control Board is an OEM replacement part for Frigidaire refrigerators. This component manages the operation of the ice and water dispenser, controlling functions like dispensing ice, water, and the corresponding display settings. It ensures that the dispenser operates correctly by communicating with other components, such as the ice maker and water valve.

Causes of a bad dispenser control board can include electrical malfunctions, power surges, or wear from regular use, which can affect the board’s ability to send signals to the dispenser components.

Symptoms of a bad dispenser control board include:

• Ice or water not dispensing properly
• Display or indicator lights not functioning
• Dispenser buttons unresponsive
• Intermittent or complete dispenser failure

This OEM replacement is also compatible with Electrolux, Gibson, Kelvinator, and Kenmore models.