Refrigerator Icemaker Water Valve Parts

Genuine, OEM Whirlpool filter reduces contaminants to provide clean, fresh tasting water. Replace every 6 months for optimal performance. Used on refrigerators that do not have built-in water filters. This filter is installed in the water line, behind the refrigerator. NSF 42 Certified coconut shell activated carbon filter medium reduces chlorine taste ad odor, rust, sediment, and other impurities.

Color: Bisque

This small plastic control arm extension links to the mechanism it serves, restoring proper movement and engagement so the appliance can operate as intended. It's a simple, direct-replacement component designed to snap in and align correctly.

• Connects to the existing control arm to extend its reach and function
• Helps correct issues like improper engagement or intermittent operation
• Can address symptoms such as sticking, misalignment, or failure to activate
• Sized to fit the original mounting points for consistent motion

• Disconnect power (and water if applicable) before servicing
• Note the orientation of the original part to match during reassembly
• Inspect the mating control arm and linkage for wear or damage
• Test operation before fully reassembling panels or covers

Color: white. Measures about 10-1/2 inches wide by 13-1/2 inches deep.

This ice container assembly stores ice in the freezer and feeds it to the dispenser. Replacing a cracked or worn bin restores reliable dispensing and helps prevent jams, clumps, or spills inside the freezer. What it does:

• Holds ice produced by the icemaker and stages it for dispensing
• Interfaces with the drive to move ice toward the chute when dispensing
• Helps maintain proper ice flow and reduce clumping
• Common symptoms: ice not dispensing or dispensing slowly, loud grinding during dispense, visible cracks, or ice spilling/leaking from the bin

• 1 ice container assembly

• Disconnect power and turn off the icemaker before servicing
• Remove the old bin and discard any remaining ice; clear frost or debris from the drive area
• Slide the new assembly straight onto the drive coupler until fully seated and latched
• Restore power and allow fresh ice to be made before testing dispensing

This smart electronic valve regulates on/off flow inside the appliance under command of the control system, helping the unit fill, dispense, or operate as designed. A precise, electronically driven valve is critical for consistent performance.

• Opens and closes when energized to start or stop flow to the connected system
• Coordinates with the control board for timed, accurate operation
• Helps prevent overfill or underfill conditions
• Common symptoms of a failing valve: no fill/flow, slow or intermittent flow, continuous flow when off, leaks from the valve body, or related fill/flow error codes

• Disconnect power and shut off the appliance's supply line upstream before servicing
• Keep towels or a container handy to catch residual fluid when lines are disconnected
• Transfer connectors and any reusable brackets from the old valve to the new one, matching orientation
• After installation, restore supply and power, then check all connections for leaks and proper operation

Refrigerator Filter Bypass Cap is an essential component for maintaining the optimal performance of your Samsung refrigerator. This genuine OEM part is designed to seamlessly integrate with a variety of Samsung refrigerator models, ensuring a perfect fit and reliable functionality. The filter bypass cap allows you to bypass the water filter when necessary, providing flexibility during filter replacements or maintenance without disrupting your refrigeratorGÇÖs operations. Its durable construction ensures long-lasting performance, helping to maintain consistent water flow and ice production even when the filter is not in use. Installing the Refrigerator Filter Bypass Cap is straightforward, making it easy for you to manage your appliance without the need for professional assistance. By choosing this genuine OEM part, you ensure that your refrigerator continues to operate efficiently, preserving the quality and freshness of your stored foods and beverages. Enhance the functionality of your Samsung refrigerator with the Refrigerator Filter Bypass Cap , a reliable solution that supports a smooth and uninterrupted cooling experience.

The Ice Maker Scoop is an OEM component specifically designed for Whirlpool ice machines. As an included accessory, it provides a sanitary and convenient way for users to fetch ice from the storage bin.

The scoop is strategically designed with an ergonomic handle and wide opening bowl shape. This facilitates easy scooping and transport of ice cubes without spillage or crumbling. Its food-safe materials maintain hygienic conditions in the storage area. 

Symptoms of a faulty scoop include:

• Cracks or breaks that compromise the scooping surface 
• Leaks or spills of ice when trying to scoop
• Sharp edges that risk cuts or scratches
• Warping or loosening of the handle attachment over time

This OEM Whirlpool scoop is also compatible with some Scotsman and Manitowoc ice machines. Replace yours today to restore safe and hygienic ice retrieval from the storage bin.
 

This replacement ice maker assembly restores automatic ice production in your refrigerator's freezer. It is the complete maker module that fills, freezes, and ejects cubes, helping resolve no-ice, incomplete harvests, and jammed or broken ice maker issues.

• Produces and releases ice cubes into the storage bin on an automatic cycle
• Works with the refrigerator to pause ice production when the bin is full
• Can address overfilling or dripping originating at the ice maker assembly

• Disconnect power and shut off the water supply before servicing
• Transfer any model-specific brackets, covers, or wiring harnesses from the original unit if needed
• Ensure the fill tube is properly aligned and not blocked by ice; clear any frost
• After installation, restore power/water and allow time for normal ice production; run the test/reset cycle if your model provides one

Pre & post reverse osmosis filters.

This replacement ice bin stores the ice produced by your refrigerator's icemaker and fits into its designated compartment for easy access. Replace a cracked or warped container to restore reliable ice storage and smooth dispensing.

• Holds harvested ice until use
• Guides cubes toward the dispenser outlet
• Restores proper fit when the original bin is cracked, broken, or warped
• Common symptoms: ice won't dispense or jams; ice spills into the freezer; bin won't seat or latch properly

• Unplug the refrigerator or disconnect power before servicing
• Empty and remove the old bin from the compartment
• Align and slide the new bin into position until fully seated
• Restore power and allow time for new ice to accumulate

This Bosch filter removes contaminants and improves water taste. The filter should be changed every six months for best performance. Simple installation requires no special tools. Measures approximately 13.25" x 2.5" x 2.5".

The Active Carbon Filter is an OEM part for Bosch refrigerators. This filter helps reduce odor-causing substances inside the refrigerator for fresher preserved food. It traps molecular impurities through an advanced filtration process.

Causes of a filter requiring replacement include normal lifespan expiration as indicated on the packaging. For optimal results, these filters should be replaced according to manufacturer guidelines.

Symptoms of a spent filter include:

• Return of odors to the refrigerator interior
• Potential taste transfers between strong smelling foods
• Reduced effectiveness of the odor reduction system

This genuine OEM Bosch part is also compatible with Thermador, Gaggenau and select Kenmore models.

The Ice Container Assembly is an OEM part for Frigidaire refrigerators. This assembly stores batches of fresh ice for retrieval.

Causes of a bad ice container can include cracks or damage allowing water to leak or ice to melt prematurely. Hinges or latches may weaken over time. Mineral deposits may clog drains and hamper ice ejection.

Symptoms of a bad ice container assembly include:

• Ice crushing or cracking inside the container
• Inability to fully rotate or lift the container out
• Water puddling inside versus stored as intended
• Ice frozen together into a solid block

This OEM Frigidaire part is also compatible with Electrolux, Gibson, Kelvinator and some Kenmore models.

This coupling is the small connector that links a drive motor to its mating component, transferring rotation so the appliance operates smoothly. Replacing a cracked or stripped coupling restores reliable drive and helps prevent further wear.

• Connects the motor shaft to the driven part to transmit torque
• Maintains alignment to reduce wobble and slippage
• Failure signs can include no movement, intermittent operation, clicking/grinding, or visible cracks/rounding
• Restores consistent motion of the connected part once replaced

• Disconnect power (and shut off water/gas if applicable) before servicing
• Access the drive area and remove any covers/tray/drive components as needed
• Pull the old coupling straight off the keyed or D-shaped shaft; clean and inspect the shaft
• Align and press the new coupling fully onto the shaft, reassemble, and test

The Icemaker is an OEM part for Whirlpool refrigerators. It automatically produces batches of ice using a water inlet and freeze cycle.

Causes can be failures in the temperature probe, water valve, ejection mechanism, or freezing compartment. Mineral buildup from hard water reduces efficiency over many harvest cycles as well.

Symptoms of a bad ice maker include:

• No ice production or low ice yields over time
• Ice cubes appearing cloudy or improperly formed
• Leaking or dripping water inside the freezer
• Clicking or grinding noises during operation

This genuine OEM Whirlpool part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.