Refrigerator Upper Rack Rollers Parts

This leveling leg supports and stabilizes the refrigerator cabinet. Adjusting it keeps the unit level so doors align and seal correctly, helping reduce vibration and noise for smoother, more reliable performance.

• Threads into the base to support and level the appliance
• Allows height adjustment for proper door alignment and gasket contact
• Helps reduce rocking, vibration, and rattling noises
• Resolve issues like doors not closing fully, uneven gaps, or a wobbly cabinet

• Disconnect power and move the appliance carefully to access the leg
• Use a helper and protect flooring; tip the unit slightly and support it securely
• Unthread the old leg; hand-thread the new leg, then adjust as needed with a wrench
• Level front-to-back and side-to-side; avoid cross-threading or overtightening

The Drawer Slide Rail is an OEM part compatible with Whirlpool refrigerators. This rail provides a smooth sliding mechanism that allows access to drawers such as the vegetable or freezer storage drawers. 

Causes of a bad Drawer Slide Rail could include damage or wear over extended use. Drawer components depend on their slide rails functioning properly to open and close smoothly without jamming or catching.

Symptoms of a faulty Drawer Slide Rail include:

• Drawers that are difficult to open and close 
• Drawers that do not fully open or extend out 
• Excessive noise or vibration coming from drawers

This replacement part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.

This crisper cover frame supports the glass shelf above the refrigerator's crisper drawers and forms the tracks the drawers slide on. Replace a cracked or warped frame to restore stable shelving and smooth drawer operation.

• Supports the glass insert and food load above the crisper drawers
• Forms the top of the crisper compartment and the channels for drawer movement
• Helps keep drawers aligned and closing properly
• Typical failure symptoms: cracks, broken corners, sagging center, drawers binding or not closing

• Unplug the refrigerator and remove food from the crisper area
• Remove the crisper drawers and carefully lift out the glass insert before handling the frame
• Transfer any reusable trim or hardware from the old frame to the new one, if applicable
• Ensure the frame is fully seated on its supports before reinstalling the glass and drawers

The Leveling Foot is an OEM part for Frigidaire refrigerators. Each adjustable foot plays an important role in properly distributing weight and providing a stable foundation for the refrigerator cabinet. Level installation is crucial for doors to seal correctly and cooling components to function efficiently.

Symptoms of faulty or improperly adjusted leveling feet include: 

• Doors that do not close or seal completely, allowing cool air loss  
• Vibrations transferring to flooring from an unbalanced refrigerator
• Potential strain and damage to drawers, shelves, or internal racks over time

Causes may involve normal wear of threaded plastic and steel over many years or inadequate leveling during initial installation.

Replace them with these genuine Frigidaire feet to restore safe, optimized operation. Adjust as needed to keep doors flush and racks even. Compatible with some Electrolux, Gibson, and Kenmore models for hassle-free fixes. 

This axle roller is the replacement support shaft that lets the appliance's rotating assembly turn smoothly and quietly. Installing a new axle roller corrects wobble and reduces grinding or squealing caused by a worn shaft. What it does:

• Supports the rotating drum or rack so it spins freely and stays aligned
• Helps prevent metal-to-metal contact that causes loud noise or scraping
• Stops uneven rotation and vibration that can lead to further wear
• Restores smooth operation when an original axle is bent, worn, or broken

• Disconnect power (and gas, if applicable) before starting any repair
• Access location and removal steps vary by model; follow the OEM service manual or diagram
• Inspect related parts (pulleys, idler, glides, bearings) and replace if they show wear
• Use basic hand tools; keep fingers and loose clothing clear of moving parts during testing

A replacement crisper drawer front panel that restores the appearance and proper closure of the refrigerator crisper compartment. Replaces a cracked, chipped, or damaged front to help the drawer sit and seal correctly. What it does:

• Replaces the damaged or worn front panel on the crisper drawer to restore fit and finish.
• Supports the crisper bin and helps the drawer slide and seat correctly in the cabinet.
• Helps reduce drafts and keeps produce contained when the original front is cracked or warped.
• Restores the refrigerator's interior appearance and eliminates cosmetic damage.

• Always unplug or switch off the refrigerator before beginning any repair.
• Remove food and the crisper drawer before installation; support shelves or components as needed.
• Basic hand tools (screwdriver) may be required; reuse existing screws/clips unless replacement hardware is specified.

This shelf slideout assembly replaces the sliding rail that lets a refrigerator shelf glide in and out, restoring smooth, stable movement and easier access to stored items. Fits factory shelf mounting locations and installs without altering the cabinet. What it does:

• Provides the sliding support for a refrigerator shelf so it extends and retracts smoothly
• Replaces worn, cracked, or misaligned slide rails that cause sticking or uneven movement
• Stops shelves from catching, binding, or falling when pulled out
• Helps restore proper shelf alignment and load support

• Disconnect power to the appliance and remove food and the shelf before starting
• Installation typically requires removing the old slide, aligning the new rail in the shelf track, and securing with existing screws or clips
• Use basic hand tools; avoid forcing broken plastic tabs—inspect and replace damaged retainers if present

This is the refrigerator crisper cover frame. It supports the pantry/crisper glass and forms the top of the humidity drawers, restoring a sturdy surface for food storage.

• Holds the crisper shelf glass and supports drawer operation
• Can crack or warp from heavy loads or impact
• Symptoms include sagging or broken shelf over crisper drawers and drawers that bind
• Restores proper fit and stability for the produce area

• Unplug the refrigerator and remove food from the shelf area
• Carefully lift out the glass before removing the damaged frame
• Transfer any trim or gaskets from the old frame if applicable
• Reinstall the frame and set the glass back into place without forcing it

Note: Looking at the diagram, this is item# 141B and it does not include the metal frame shown in the picture. The assembly with the frame is item# 141A and is no longer available from the factory. 

This track pan replaces the damaged or worn snack/deli drawer pan so food stays contained and organized inside the refrigerator. It restores proper sliding and helps prevent spills and food contamination. What it does:

• Provides a shallow sliding pan for deli, snack or small-item storage
• Supports smooth in-and-out sliding of the drawer and helps keep contents contained
• Replaces cracked, warped, or broken pans that cause sticking or spills
• Helps maintain an organized refrigerator interior and makes cleaning easier

• One track pan

• Disconnect power to the appliance before beginning any work
• Empty and remove the existing drawer and pan before installing the replacement
• Slide the new pan into the same track position until it seats; verify smooth operation
• If the track or mounting hardware is damaged, replace those parts as well.

This replacement roller fits the front or rear position of a slide mechanism, restoring smooth, even movement and reducing noise when a wheel is worn or broken. It helps racks or drawers glide properly and stay aligned. What it does:

• Provides low-friction rolling support for the slide track
• Helps slide-out assemblies move freely without binding or scraping
• Worn or damaged rollers can cause sticking, squeaking, or uneven travel
• Restores proper alignment and smooth operation when replaced

• 1 roller assembly

• Disconnect power and allow the appliance to cool before servicing
• Remove the slide-out assembly; note roller orientation and hardware
• Transfer/reuse existing screws, clips, or retainers as required
• Do not lubricate unless the manufacturer specifies a lubricant

The Glide is an OEM part for Frigidaire ranges. It ensures smooth movement of the storage drawer, allowing you to easily access and organize your stored items.

A bad glide can be caused by wear and tear, damage, or lack of lubrication. Signs of a faulty glide include a sticky or jammed drawer, uneven sliding, or a drawer that doesn't close properly.

Symptoms of a bad glide can include:

• Difficulty in opening or closing the storage drawer.
• Uneven or jerky sliding motion of the drawer.
• Drawer getting stuck or not fully closing.

Replace your worn-out or damaged glide with this genuine OEM part to restore movement to your range's storage drawer. This Frigidaire part can also be used on Electrolux, Frigidaire, Gibson, Kelvinator, Westinghouse, and Sears/Kenmore.
 

The Freezer Leveling Leg is an OEM part for Frigidaire upright freezers. It stabilizes and balances the appliance on uneven surfaces.

Causes relate to typical bearing wear from years of weight support. Rust forms without protective finish. Cracks develop from impact damage.

Symptoms of compromised leveling legs include:

• Excessive vibrations, noise or shaking during compressor operation
• Doors that no longer close or seal properly
• Ice maker malfunctions on frost-free models

This OEM Frigidaire part is also compatible with Electrolux, Gibson, Kelvinator and some Kenmore models.

Replacement crisper pan for refrigerators that provides a flat, removable surface to hold fruits and vegetables and helps contain spills for easier cleaning and storage. What it does

• Holds produce and other refrigerated items securely in the crisper compartment.
• Contains spills and drips to protect the compartment below.
• Helps restore usable storage when the original pan is cracked, broken, or missing.
• Reduces mess and makes drawer cleaning faster.

• Remove all food from the crisper drawer before replacing the pan.
• Slide the old pan out, wipe the compartment clean, then position and slide the new pan into place.
• Most replacements are straightforward and require no tools; if the pan does not seat properly, check the refrigerator's parts diagram.

This slide-out freezer shelf restores smooth access and sturdy storage in the freezer compartment. Replace a cracked, missing, or hard-to-move shelf to keep frozen foods supported, organized, and within easy reach.

• Provides a gliding storage surface in the freezer compartment
• Supports and organizes frozen foods for easier access to items in back
• Restores proper fit and sliding action when the original shelf is damaged or binding
• Typical signs you need this part: cracked/broken or missing shelf, sticking or uneven slide

• Empty the shelf and remove any obstructing bins or baskets
• Align rear tabs/pegs with the freezer slots or rails, then lower the front into place
• Ensure the shelf seats fully and slides smoothly before reloading food
• Handle edges carefully; consider wearing cut-resistant gloves

This ice gear transfers motor rotation to the refrigerator's ice mechanism so cubes can be dispensed or ejected. Replacing a worn or stripped gear restores smooth, reliable ice operation and helps eliminate grinding or clicking noises.

• Transfers drive from the motor to the ice mechanism (auger/ejector, depending on model)
• Helps move ice through the system for dispensing or harvest
• Common symptoms: no or slow ice dispensing, auger not turning, loud clicking/grinding from the ice bin
• Cracked or stripped teeth indicate the gear should be replaced

• Disconnect power to the refrigerator before servicing
• Remove the ice bin and access the ice assembly per your model; note gear orientation for reassembly
• Align teeth carefully; do not force the gear onto the shaft
• Inspect related parts (drive coupler, auger, motor shaft) and replace any worn components to prevent repeat failure