Refrigerator Liquid Valve Parts

The Water Valve is an OEM component for GE side-by-side refrigerators. Located internally within the water dispenser assembly, this valve controls water flow to the ice maker and dispenser.

Causes of a faulty water valve can include mineral buildup restricting flow over time, gasket wear from constant opening/closing, and electrical faults impacting the valve's solenoid.

Symptoms requiring replacement are:

• Slow or inconsistent water flow from the dispenser  
• The ice maker fails to fill or produces irregular cubes
• Water leaking into areas it should not reach

This OEM GE part fits additional appliances under the same household brand family such as Hotpoint, RCA, and comparable Kenmore models.

Water inlet valve kit replaces older valves that used the "Y" type water lines.

This water inlet valve opens and closes to control water entering your appliance. A worn or stuck valve can cause fill problems or leaks—replacing it restores proper water flow and reliable operation.

• Regulates water flow into the unit during fill cycles
• Common symptoms: no water or slow fill, water continues to fill when off, leaks from the valve body, or humming/clicking without water flow
• Typically located where the household water line connects to the appliance

• Disconnect power and shut off the water supply before servicing
• Keep a towel or container handy to catch residual water
• Note hose and wire positions; take a photo for reference and transfer any brackets as needed
• Inspect/flush the supply line and screens; reconnect and check for leaks after installation

This electrically actuated valve controls the flow of household water into your appliance during operation. Replacing a sticking or leaking valve restores proper fill performance and helps prevent unwanted dripping between cycles. What it does:

• Opens and closes to admit the correct amount of water at the right time
• Helps maintain stable water pressure and shutoff to the unit
• Common symptoms of a failing valve: no fill, slow/insufficient fill, water seeping into the tub when off, or leaks from the valve body
• May buzz or hum without allowing water flow when the internal coil or screen has failed or is clogged

• 1 water inlet valve

• Disconnect power and shut off the water supply before servicing
• Keep towels or a tray handy; some residual water will drain
• Note hose and wire orientations; transfer any brackets or fittings from the original valve
• After installation, restore water and power, check for leaks, and run a test fill cycle

The Refrigerator Water Inlet Valve is an essential component for maintaining the optimal functionality of your Samsung refrigerator. This genuine OEM part ensures a reliable water flow to your ice maker and water dispenser, preventing leaks and interruptions in performance. Designed specifically for Samsung refrigerators, it guarantees a perfect fit and seamless integration with your appliance system. The durable construction of the water inlet valve offers long-lasting performance, reducing the need for frequent replacements and providing peace of mind. Installing this valve is straightforward, allowing you to restore your refrigerator's water supply quickly and efficiently. By choosing the Refrigerator Water Inlet Valve , you ensure that your refrigerator continues to deliver fresh, clean water and ice with consistent quality. Whether you're experiencing decreased water flow or suspect a malfunctioning valve, this genuine OEM part is the ideal solution to keep your Samsung refrigerator running smoothly and efficiently, enhancing your overall user experience.

The Refrigerator Ice Dispenser Valve Coil Solenoid is essential for the optimal operation of your Samsung refrigerator's ice dispenser. This genuine OEM part ensures reliable performance by controlling the flow of water to produce ice efficiently. Designed specifically for Samsung refrigerator models, it guarantees a perfect fit and seamless integration with your appliance. The valve coil solenoid plays a critical role in regulating ice production, preventing leaks, and maintaining a consistent ice supply. By replacing a faulty or worn-out solenoid with this high-quality component, you can restore your ice dispenser's functionality swiftly and effectively. Installation is straightforward, allowing you to perform the repair with ease and confidence. Choosing this genuine OEM part means you are investing in durability and dependable performance, ensuring your refrigerator continues to provide fresh ice whenever you need it. Enhance your fridge's performance and enjoy the convenience of a fully functioning ice dispenser with the Refrigerator Ice Dispenser Valve Coil Solenoid .

The Refrigerator Water Inlet Valve Assembly is essential for managing the water flow in your Samsung refrigerator. This genuine OEM part ensures precise control of water entering the appliance, which is crucial for ice makers and water dispensers to function correctly. Designed specifically for Samsung refrigerators, it guarantees a secure fit and reliable performance. The assembly helps prevent leaks and maintains consistent water pressure, enhancing the efficiency of your fridge. Installing this genuine OEM part means you are choosing a durable and long-lasting solution that restores your refrigeratorGÇÖs functionality effectively. Whether you are replacing a worn-out valve or addressing water flow issues, the Refrigerator Water Inlet Valve Assembly offers the quality and dependability you need. Trust in this genuine OEM part to keep your Samsung refrigerator running smoothly and ensure a better overall customer experience.

This water inlet valve controls the flow of household water into the refrigerator's ice maker during fill cycles. Replacing a sticking or leaking valve restores proper ice fills and helps prevent nuisance leaks at the back of the unit. What it does:

• Opens when energized to supply water to the ice maker, then closes to stop flow
• Common symptoms: no ice production, weak/empty fills, or leaking from the rear valve area
• Ice maker overfilling or fill-tube icing from a valve that doesn't fully close
• Humming/buzzing from the valve with little or no water flow

• 1 water inlet valve assembly

• Disconnect power and shut off the water supply before servicing
• Pull the refrigerator forward to access the rear; place a towel to catch residual water
• Transfer any mounting bracket/tubing from the old valve and secure all connections firmly
• Restore water and power, then check every connection for leaks while the ice maker cycles

Bottle with brush. Color: Black. Size: 0.6 fl.oz.

Does not include instructions.The only literature inserted is a notification stating that these valves no longer come with the harness

Water inlet valve controls water flow to the refrigerator's dispenser and ice maker. Replacing a failed valve restores normal water delivery and can resolve symptoms like no water, weak flow, or continuous running/filling. What it does:

• Opens to allow water into the ice maker and dispenser when requested.
• Closes to stop water flow and prevent overfilling.
• Common symptoms: no water from dispenser, slow/weak water flow, or the ice maker not filling.
• Also used when leaks or intermittent water flow are traced to the inlet area.

• Disconnect power and shut off the home water supply before servicing.
• Relieve line pressure by dispensing water or gently loosening a downstream connection.
• Inspect fittings and seals; tighten connections snugly but avoid overtightening.
• After installation, turn on water and power, check for leaks, and verify dispenser/ice maker operation.

This smart electronic valve regulates on/off flow inside the appliance under command of the control system, helping the unit fill, dispense, or operate as designed. A precise, electronically driven valve is critical for consistent performance.

• Opens and closes when energized to start or stop flow to the connected system
• Coordinates with the control board for timed, accurate operation
• Helps prevent overfill or underfill conditions
• Common symptoms of a failing valve: no fill/flow, slow or intermittent flow, continuous flow when off, leaks from the valve body, or related fill/flow error codes

• Disconnect power and shut off the appliance's supply line upstream before servicing
• Keep towels or a container handy to catch residual fluid when lines are disconnected
• Transfer connectors and any reusable brackets from the old valve to the new one, matching orientation
• After installation, restore supply and power, then check all connections for leaks and proper operation

Bottle with brush. Color: Biscuit paint. It's point-six fluid ounces.

This refrigerator water inlet valve controls the flow of household water into the icemaker during the fill cycle, helping restore dependable ice production and preventing drips by sealing closed when not energized. What it does

• Opens on command to supply water to the icemaker; closes to stop flow
• Regulates fill volume for proper cube size and consistent operation
• Common failure symptoms may include no ice production, icemaker won't fill, small or hollow cubes, water leaking near the rear valve area, or a humming/buzzing sound with no water

• One water inlet valve assembly

• Unplug the refrigerator and shut off the household water supply before servicing
• Relieve line pressure; place a towel or container to catch residual water
• Note wire and tube positions; transfer any fittings or the mounting bracket from the original valve if required
• Restore water and power, check all connections for leaks, and run a test fill to purge air

Almond. Size: 13 oz. can. Acrylic appliance paint.

This small filter sits inside the refrigerator's water inlet solenoid valve to trap sediment from the household water supply. Replacing a clogged or damaged filter helps protect the valve and can restore normal water dispenser and ice maker flow.

• Filters debris from the incoming water line to protect the inlet valve and water system
• Useful to replace when sediment or scale is found during valve maintenance
• Fits in the valve's inlet port to keep particles out of the valve body

• Disconnect power and shut off the water supply before servicing
• Access the rear water inlet valve, relieve line pressure, and remove the supply line
• Pull out the old filter from the valve inlet and fully seat the new filter
• Restore water, check for leaks, and purge air by running the dispenser