Refrigerator Broken Cracked Control Knob Parts

This is a refrigerator control board that can be used to replace a damaged or faulty board in select refrigerators. The control board is used to manage various functions that occur in the refrigerator, including cooling and defrosting. If there is a problem with the board, the refrigerator might not be able to defrost correctly, or it might not stay cool.The control board for the refrigerator tends to last a long time. However, it could eventually wear out and stop working. It could be damaged due to a voltage surge, or it might be a faulty board. Remove and store all food in the refrigerator and unplug it before beginning repairs.This refrigerator control board works with certain models from Kenmore, Whirlpool, KitchenAid, Roper, Estate, Inglis, Crosley, Gladiator, Kirkland, and Maytag. It's sold individually and is a genuine OEM replacement.

This replacement timer knob attaches to the control panel timer so you can set and adjust time reliably. Replacing a worn or missing knob restores a secure grip and clear pointer orientation for everyday use.

• Attaches to the timer shaft to turn and set the kitchen timer
• Common fix for knobs that are cracked, stripped, loose, or missing
• Helps when the timer can't be set or the shaft spins without turning
• Restores smooth rotation and proper alignment on the control panel

• Disconnect power to the appliance before servicing
• Pull the old knob straight off the timer shaft
• Align the new knob with the shaft and press firmly until fully seated
• Test timer operation and pointer alignment before restoring power

Fresh food section. Color: clear. Measures about 3 inches in diameter.

The Refer sum module is an electrical control module for GE refrigerators that helps manage monitored functions and restores normal operation when the original module fails. Replacing this module can resolve intermittent or nonworking refrigerator systems. What it does:

• Controls and coordinates monitored refrigerator functions tied to the module
• Corrects symptoms such as intermittent operation, failure to start, or unresponsive components
• Helps eliminate faults caused by a failed control module that interrupt normal cycles
• Works with existing wiring and connectors to restore the appliance's designed control functions

• Disconnect power to the refrigerator before beginning any work to avoid shock or equipment damage
• Handle the module by its edges and avoid contact with circuit traces; protect against static discharge
• Reconnect all wiring harnesses securely; do not force connectors

The Dispenser Control Board is an OEM replacement part for Frigidaire refrigerators. This component manages the operation of the ice and water dispenser, controlling functions like dispensing ice, water, and the corresponding display settings. It ensures that the dispenser operates correctly by communicating with other components, such as the ice maker and water valve.

Causes of a bad dispenser control board can include electrical malfunctions, power surges, or wear from regular use, which can affect the board’s ability to send signals to the dispenser components.

Symptoms of a bad dispenser control board include:

• Ice or water not dispensing properly
• Display or indicator lights not functioning
• Dispenser buttons unresponsive
• Intermittent or complete dispenser failure

This OEM replacement is also compatible with Electrolux, Gibson, Kelvinator, and Kenmore models.

This is a replacement control board that has been manufactured by General Electric for use with refrigerators.The control board is a critical component that ensures various refrigerator functions, such as defrost times and cooling, are properly regulated. This part should be replaced as soon as possible if faulty, otherwise the refrigerator may not be able to maintain a cold temperature or might not work at all. Before replacing this part, ensure the appliance is entirely disconnected from the power and water sources. Whenever attempting a repair, wear work gloves for protection.This part is suitable for use on a refrigerators that have been manufactured by General Electric, Hotpoint, RCA, and some other brands. This is a genuine OEM part and thus is manufactured from high-quality, durable, non-corrosive materials and is only sold individually.

The Refrigerator Main Control Board is essential for the optimal functioning of your Samsung refrigerator. This genuine OEM part oversees critical operations such as temperature regulation, defrost cycles, and overall appliance performance. Designed specifically for a variety of Samsung refrigerator models, it ensures seamless compatibility and reliable functionality. Replacing a malfunctioning control board with this genuine OEM part restores your fridgeGÇÖs ability to maintain consistent cooling and energy efficiency. The main control board provides precise control over your refrigeratorGÇÖs settings, enhancing the overall user experience and ensuring your food stays fresh longer. Installation is straightforward, allowing you to quickly get your appliance back in working order without hassle. By choosing the Refrigerator Main Control Board , you are investing in a high-quality, durable component that supports the long-term performance of your Samsung refrigerator. Trust this genuine OEM part to deliver the reliability and efficiency your appliance needs.

This freezer temperature control lets you set and regulate the freezer's temperature, signaling the appliance to maintain consistent freezing conditions. Replacing a worn control restores accurate adjustment and helps protect your frozen foods. What it does:

• Sets the desired freezer temperature based on your dial/setting
• Regulates cooling or airflow to reach and maintain the selected temperature
• Helps keep freezer temperatures stable for reliable food storage and ice quality
• Common symptoms: freezer too warm or too cold, temperature swings, or a control that's stuck, erratic, or unresponsive

• 1 freezer temperature control

• Unplug the refrigerator before servicing
• Access the control housing; note wire connections and component orientation for reassembly
• Handle any sensing element or linkage carefully; avoid sharp bends or damage
• Reassemble, restore power, and verify temperature operation with an appliance thermometer

The Electronic Control Board is an OEM part for Whirlpool refrigerators. It is responsible for controlling and regulating various functions of your refrigerator, including maintaining the right temperature, controlling the defrost cycle, and managing other essential operations.

A bad electronic control board can occur due to electrical issues, power surges, or component failure. If you notice symptoms such as erratic temperature readings, unresponsive controls, or unusual operation of your refrigerator, it may be time to replace the electronic control board.

Symptoms of a bad electronic control board include:

• Erratic temperature readings
• Unresponsive controls
• Inconsistent or unusual refrigerator operation

Restore your Whirlpool refrigerator by replacing the faulty or malfunctioning electronic control board with this genuine OEM part.

This Whirlpool replacement part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.
 

This electronic control board is the central module that runs your dishwasher's cycles. It controls power and timing so the unit fills, washes, drains, and dries correctly—restoring normal operation when the original board has failed.

• Manages cycle timing and options, routing power to the wash motor, drain pump, water inlet valve, and heating circuit
• Interfaces with sensors and the door latch to start and advance cycles
• Monitors faults to help protect components and ensure proper operation

• Disconnect power at the breaker and verify no voltage before service
• Access location varies by model
• Use ESD precautions; move connectors one at a time to the matching terminals
• After reassembly, run the unit's diagnostic/service cycle per the tech sheet to verify operation

Restore consistent cooling with this temperature control thermostat. It senses internal temperature and cycles the cooling system on and off to maintain the setting you select, helping prevent warm spots and over-cooling.

• Regulates compartment temperature by opening/closing electrical contacts to start and stop cooling
• User-adjustable via the control knob/dial; helps maintain a steady set point
• Common symptoms include: unit too warm or too cold, won't cycle off or won't start cooling, or erratic temperature swings
• Tapping the control area to make the unit start/stop can indicate a worn control

• Disconnect power before servicing; use proper PPE
• Photograph and label wire positions before removal; transfer the knob/dial and any brackets from the original control
• Install the new control in the same orientation; set to a mid setting for initial testing
• Restore power and allow up to 24 hours for temperatures to stabilize; adjust as needed

This electronic control board is the central "brain" of the appliance. It manages cycle timing and directs power to key components, helping restore proper operation when the original board fails or becomes intermittent.

• Coordinates cycle timing and logic for the appliance
• Monitors inputs from sensors and switches, then executes the correct program steps
• Distributes power to loads such as motors, pumps, valves, fans, and heaters
• Failure symptoms can include no start, won't complete a cycle, erratic operation, error codes, or components not receiving power

• Disconnect power at the breaker or unplug the appliance before servicing
• Use ESD precautions; handle the board by edges and avoid touching connector pins
• Photograph wiring and transfer any brackets or covers from the old board; seat all connectors fully
• Reinstall panels and run the model's diagnostic or test cycle per the tech sheet to verify operation

This electronic control board is the refrigerator's central control module, coordinating cooling and defrost functions for stable temperatures. Replacing a failing board helps restore proper operation of the compressor, fans, and related circuits.

• Regulates cooling by switching the compressor and fans based on sensor input
• Controls and times the automatic defrost cycle to prevent frost buildup
• Supplies logic and power to temperature controls and indicators
• Can cause no-cool, intermittent cooling, constant running, or unresponsive controls when faulty

• Disconnect power to the refrigerator before servicing
• Handle the board by the edges and use ESD protection if available
• Photograph/label connectors and transfer wiring one at a time
• Some models require control setup or calibration—follow the appliance's service instructions

This Board Assembly is an OEM part for Frigidaire refrigerators. It serves as a crucial component in the electronic system of the fridge, responsible for controlling various functions such as temperature regulation, defrost cycles, and energy efficiency modes.

The degradation of a fridge's board assembly can occur due to electrical surges, wear and tear over time, moisture exposure, or other electronic malfunctions. These can affect the refrigerator's ability to maintain consistent temperatures, potentially leading to food spoilage or increased energy consumption.

Symptoms of a failing board assembly include:

• Inconsistent cooling or temperature fluctuations.
• The fridge or freezer compartment not cooling adequately.
• The display panel is unresponsive or showing error codes.
• The defrost cycle not functioning properly, leading to frost buildup.
• Unusual noises or the fridge cycling on and off more frequently than normal.

This Frigidaire OEM replacement part is also compatible with Electrolux, Gibson, Kelvinator, and some Kenmore models.
 

This electronic control board is the brain of your appliance, managing power, timing, and user inputs. Replacing a failing board can restore responsive controls, accurate cycles, and reliable operation when the original becomes unresponsive or erratic. What it does:

• Distributes power and timing to relays and components according to selected settings
• Interfaces with the keypad/touch controls and display
• Monitors sensors/switches and executes programmed cycles
• May address symptoms such as no display, unresponsive buttons, won't start, cycles that won't advance, random beeping, or error codes

• 1 electronic control board

• Disconnect appliance from power before servicing; verify no voltage is present
• Use ESD protection and handle the board by the edges
• Photograph/document all wire harness connections; move connectors one at a time
• Transfer any mounting brackets or jumpers from the original board as needed
• After installation, run service diagnostics or control calibration if the model provides it

This bin button is a small snap-in component used on refrigerator storage bins. It helps secure and align the bin so it seats properly and operates smoothly, restoring a tight fit when the original button is cracked, worn, or missing.

• Snaps into a designated opening on the bin or cabinet liner to act as a support/stop
• Keeps the bin aligned and secured during everyday use
• Replaces a damaged or missing button that can cause wobble, binding, or the bin to fall out
• Restores proper fit and smooth operation of the affected bin

• Disconnect power and remove items from the affected bin
• Remove the bin; pry out the damaged/missing button from its seat
• Align and press the new button fully into the opening until secure
• Reinstall the bin and check for smooth, secure operation