Refrigerator Clean Touch Parts

This noise filter reduces electrical interference on the appliance's power line to help prevent buzzing, humming or intermittent operation caused by electrical noise. It restores quieter, more reliable performance when the filter is the worn component. What it does:

• Suppresses electrical noise and interference on the appliance power line
• Helps reduce audible buzzing, humming or intermittent electronic behavior
• Protects sensitive control electronics from stray electrical transients
• Restores normal operation when a damaged filter is the root cause

• Disconnect power before servicing to avoid shock hazard
• Handle and mount the filter per OEM orientation; secure connections firmly

This water filter base secures the refrigerator's replaceable water filter cartridge and directs filtered water to the dispenser and icemaker. Replacing a damaged base restores a proper seal and helps prevent leaks and flow interruptions. What it does:

• Holds and seals the water filter cartridge so water passes through the filter media
• Directs filtered water to the dispenser and icemaker plumbing
• Prevents leaks caused by cracked or worn filter housing
• Can resolve low water flow, intermittent dispensing, or water taste issues when base is leaking or not sealing

• One water filter base assembly

• Turn off refrigerator and shut off the water supply before starting
• Relieve system pressure by dispensing water until flow stops, if applicable
• Remove the old housing carefully; inspect O-rings and replace if damaged
• Hand-tighten only; check connections and test for leaks after restoring water and power

The MWF Bypass is an OEM replacement part for GE refrigerators. Located within the bottom freezer compartment, the metal water filter bypass fitted assembly is responsible for directing filtered or unfiltered water flow to the ice maker and dispenser.

Causes for replacement may include faulty diverter components obstructing water flow to selections or resulting in water leaks.

Symptoms of a problematic bypass unit include:

• Inability to select filtered or unfiltered water from the dispenser
• Ice maker failure due to lack of water or poor water quality
• Mineral deposits accumulating on internal parts from unfiltered water

This OEM replacement bypass is compatible with GE, Hotpoint, and Profile model refrigerators.

This water filter manifold directs and seals the water flow to the refrigerator's filter housing so your dispenser and ice maker receive filtered water. Replaces a damaged or leaking manifold to restore proper water routing and pressure to the filter area. What it does:

• Channels incoming water into the filter housing and back to the dispenser/ice maker
• Provides mounting and a sealed connection point for the cartridge-style filter
• Commonly replaced for leaks, reduced water flow, or when the filter won't seat properly
• Works with the refrigerator's internal water plumbing and filter housing assembly

• One water filter manifold

• Turn off the refrigerator water supply and disconnect power before servicing
• Drain remaining water from lines and wear eye protection to avoid spills
• Inspect O-rings/seals and replace if damaged; hand-tighten fittings and avoid over-torquing

The RFID Water Filter Board is an OEM part for GE refrigerators. It is an electronic component located inside the filter housing that reads the RFID chip in Genuine GE water filters. The board monitors filter life and provides notification when it's time for a replacement. 

Symptoms of a bad RFID water filter board include:

• Inability to detect when a new filter is installed  
• Error codes or filter life indicators not functioning properly
• Water dispenser not working or dispensing unfiltered water

Causes may include damage from moisture or leaks over time, failure of electronic components, or normal wear and tear.

This replacement board is also compatible with Hotpoint, RCA, and some Kenmore models.

This Whirlpool Water Filter Housing is an OEM part for specific Whirlpool refrigerator models. It plays a role in accommodating the water filter, ensuring clean and safe drinking water is dispensed from your fridge. 

A faulty housing may lead to water leaks, improper filter fitting, or reduced effectiveness in water filtration, affecting the quality of the water dispensed.

Symptoms of a bad water filter housing include:

• Leaking water near the filter area.
• Difficulty in installing or removing the water filter.
• Unusual noise or vibration when the water dispenser is used.
• The water filter does not lock in place securely.
• Noticeable decrease in water flow from the dispenser.

This genuine Whirlpool OEM replacement part is compatible with Maytag, Jenn-Air, and Kenmore models.
 

The Water Filter Bypass is an OEM replacement part for Frigidaire refrigerators. It provides an alternative water supply route to bypass the refrigerator's built-in water filtration system. The bypass allows refrigerator water and ice dispensers to operate without water flowing through the installed filter cartridge. 

Causes of a malfunctioning bypass can include mineral buildup inhibiting proper operation of the bypass valve, worn seals or O-rings not providing a tight seal or physical damage.  

Symptoms include:

• Inability to bypass the water filter when needed  
• Leaks from the bypass area
• The filter bypass not functioning or engaging properly

This OEM replacement is also compatible with refrigerator brands like Electrolux, Gibson, Kelvinator, and select Kenmore models.

This refrigerator water filter mount secures the filter head/housing to the liner so the cartridge seats squarely and seals. Replace a cracked or loose mount to restore a snug fit and help prevent leaks or vibration.

• Holds the water filter housing firmly in place
• Aligns the cartridge for proper engagement with the filter head
• Helps maintain a watertight seal at the filter connection
• Common symptoms: filter won't lock in or sits crooked, drips around the filter area, difficulty installing/removing the filter, or rattling from a loose housing

• Disconnect power and shut off the water supply; dispense water to relieve line pressure
• Remove the filter and any cover/trim to access the mount; retain existing screws for reuse
• Install the new mount and tighten screws gently to avoid cracking plastic
• Reinstall the filter, restore water and power, flush the dispenser, and check for leaks

This PurePour Connect PWF-2 refrigerator water filter installs in the factory filter housing to help deliver cleaner, better-tasting water and ice. Replacing a saturated filter restores dispenser flow and keeps your refrigerator's water system working as intended. What it does

• Filters the incoming water for the dispenser and ice maker
• Routine replacement (about every 6 months or when the indicator turns on) helps maintain taste and flow
• A clogged/expired filter can cause slow dispensing, small/empty ice, or a "Change Filter" alert
• Designed for refrigerators that use the PurePour Connect PWF-2 filter style

• One refrigerator water filter (single cartridge)

• Turn off the water supply and dispense water to relieve pressure; place a towel to catch drips
• Insert the new filter fully and lock it in place; check for leaks
• Flush several pitchers of water after installation and reset the filter status light per your model

This water filter manifold is the assembly the MWF cartridge locks into, sealing the connection and routing water through the filter to your dispenser and icemaker. Replacing a worn manifold can stop leaks and restore normal water flow. What it does:

• Holds and seals the MWF water filter cartridge
• Directs filtered water to the dispenser and icemaker
• Can help resolve leaks at the filter head, slow/low flow, or no water/ice
• Addresses issues where the filter won't seat or keeps popping out

• 1 water filter manifold assembly

• Unplug the refrigerator and shut off the water supply; dispense water to relieve pressure
• Keep a towel handy for residual water and take photos to note tube routing before removal
• Fully seat tubing and connections during reassembly; ensure the filter locks in securely
• Restore water and power, then check for leaks and run water to purge air

Reduces contaminants and removes chlorine taste and odor to deliver clean and healthy water. It is certified by NSF International against NSF/ANSI Standard 42, Standard 53, and Standard 401 to remove other contaminants such as asbestos, atrazine, benzene and mercury. Easy push and twist install that requires no special tools. Filter should be replaced every 6 months or 200 Gal. to maximize contaminant reduction. Operating Pressure: 30-100 psi. Operating Temperature: 40-100°F. Flow Rate: .5 gpm.

A replacement PurePour pour-through funnel for refrigerator water-filter filling—helps channel water directly into the PurePour filter housing to reduce spills and ensure the cartridge fills and seats correctly. What it does:

• Funnels water cleanly into the PurePour filter housing to minimize splashing and wasted water.
• Promotes even filter cartridge filling so the filter can seat properly.
• Use when you notice water spilling, trouble filling the filter, or the filter won't seat securely.
• Works as the direct replacement component for the PurePour pour-through fill assembly.

• One replacement pour-through funnel.

• Turn off the refrigerator's water supply before removing or installing the funnel.
• Wipe the area dry and seat the funnel fully into the filter housing; no special tools typically required.
• Inspect seals and the filter cartridge for damage while replacing the funnel.

This membrane switch is the flexible button panel that sits under the appliance control bezel, restoring responsive push-button input and clear button labels for the control console. It's a direct-fit replacement for a worn or damaged keypad surface. What it does

• Registers user button presses and sends input to the appliance control board.
• Replaces cracked, faded, or unresponsive keypad areas that no longer activate functions.
• Helps resolve intermittent or failed button responses when the keypad is the root cause.
• Restores correct tactile feel and button alignment under the front bezel.

• Disconnect power or unplug the appliance before beginning any service.
• Remove the control bezel or console to access the membrane; handle the thin membrane carefully to avoid creases or damage.
• Align the membrane over the control board and seating posts, then reassemble the bezel; ensure any adhesive or locating tabs are correctly positioned.

This water filter head and tubing holds the water filter and may need to be replaced if it is cracked or damaged, causing a leak.

This control box is the electronic control assembly that manages appliance functions and user inputs, restoring normal control response and cycle operation. It replaces a failed or unresponsive control module to help the appliance run correctly. What it does:

• Houses the main control circuitry that sends and receives signals for cycles, timers, and user commands
• Replaces a control box that causes unresponsive buttons, error codes, or intermittent operation
• Restores proper communication between the user interface and internal components
• Helps stop erratic cycles, failure-to-start issues, or unexpected shutdowns when the control is defective

• One control box (electronic control assembly), as shown

• Disconnect power before servicing to avoid electric shock; verify power is off at the breaker
• Handle the board and connectors carefully to avoid static or physical damage
• Confirm connector locations and reinstall any mounting hardware in original positions

This HMI assembly is the user interface/control panel that operates the dispenser and display functions on compatible refrigerators. Replaces a worn or non-working control/display assembly to restore input and visual feedback. What it does:

• Provides the front-facing display and touch/press controls for dispenser and temperature settings
• Sends user commands to the refrigerator's main control board for functions like dispensing and settings changes
• Commonly replaces assemblies when the display is blank, unresponsive buttons, or incorrect/disappearing indicators
• Restores normal control and feedback when original panel is cracked, worn, or electrically failed

• One HMI assembly (control panel/display)

• Disconnect power before starting to avoid shock or damage
• Handle ribbon cables and connectors gently; ensure connectors are fully seated during reassembly