Trash Compactor Slow Clamp Line Mover Wheel Parts
Genuine Whirlpool part
By: Whirlpool
Part Number: 882688
Dual roller assembly for trash compactor drawer glide system. Replace when rollers are worn, cracked, or drawer slides hard. Installs on compactor base.
Do-It-Yourself Stories from Customers like You
The drawer on my 24 year old compactor would no longer open freely have to pull it open with substantial force Stephen M. • Roanoke , TX • June 17, 2015
Rood Cause #1: One of the front roller bearings was worn out and did not spin freely.
Solution #1: I replaced the two front roller bearing assemblies (both included 2-pack).
Rood Cause #2: The bottom surface of the compactor slide-out assembly had become deformed (convex) most likely due to the repeated force of compaction over the years. This bottom surface rubbed against the lower frame as evidenced by removal of paint (bare metal was exposed). Friction prevented the compactor drawer...
Read more
More
$22.41
- Compare At:
-
$26.89
- You Save:
-
$4.48
Genuine Ge part
By: Ge
Part Number: WC01X20226
Frame roller assembly mounts to the compactor frame to support the sliding drawer. Replace if the roller is worn, cracked, or causing sticking movement.
Do-It-Yourself Stories from Customers like You
Frame roller assembly (right side) had completely failed Bjorn H. • Saratoga , CA • March 12, 2014
Received the part, and easily removed the two metal covers on the front of the trash compactor (total of eight small metal screws) to gain access to the backside of the roller assembly (locking nut). Used a socket wrench to unscrew the nut and removed the old assembly. The new assembly easily bolted into location, followed by reinstalling the metal covers. All in all, a quick and easy repair.
Read more
More
$20.95
- Compare At:
-
$21.36
- You Save:
-
$0.41
Genuine Ge part
By: Ge
Part Number: WC01X20232
Drawer roller assembly for trash compactors. Guides the compactor drawer in and out smoothly. Replace if cracked, broken, or causing friction during use.
Do-It-Yourself Stories from Customers like You
Busted rollers Jason R. • Bermuda Dunes , CA • October 01, 2021
Removed trash tray, replaced rear roller with 14mm socket then unscrewed front cover to access front roller. Replaced it with same 14mm socket.
Read more
More
$18.39
- Compare At:
-
$21.88
- You Save:
-
$3.49
Genuine Ge part
By: Ge
Part Number: WC36X5084
Mounting clip secures components in your compactor. Replace if broken, missing, or loose to restore proper assembly. Verify fit with your model number.
More
$14.95
- Compare At:
-
$18.39
- You Save:
-
$3.44
Out Of Stock
Usually ships within 4 - 14 days
Genuine Ge part
By: Ge
Part Number: WC02X20158
Replace worn or broken drawer wheel assembly in your trash compactor. Restores smooth rolling movement for drawers that bind, wobble, or drag along the track.
More
$22.95
- Compare At:
-
$27.54
- You Save:
-
$4.59
Out Of Stock
Usually ships within 4 - 14 days
Genuine Ge part
By: Ge
Part Number: WC02X20146
Secures compactor panels and trim to the cabinet frame. Replace when mounting hardware is worn, broken, or causing rattling. Confirm fit with your model.
More
$12.95
- Compare At:
-
$15.41
- You Save:
-
$2.46
Out Of Stock
Usually ships within 4 - 14 days
Genuine Ge part
By: Ge
Part Number: WC01X20107
Secures shafts, hoses, and components in your trash compactor to prevent movement or separation. Replace if loose, damaged, or parts shift during operation. Confirm fit with your model number.
More
$12.95
- Compare At:
-
$15.41
- You Save:
-
$2.46
Out Of Stock
Usually ships within 4 - 14 days
Genuine Whirlpool part
By: Whirlpool
Part Number: 4151897
S-clip secures components in your trash compactor. Replace if bent, broken, or causing rattling noises. Verify fit with your model number.
More
$4.95
- Compare At:
-
$5.89
- You Save:
-
$0.94
Out Of Stock
Usually ships within 4 - 14 days
Genuine Ge part
By: Ge
Part Number: WC02X10014
Wire clip secures wiring in your trash compactor. Replace if damaged, loose, or causing wire exposure. Verify fit with your model number before ordering.
More
$4.21
- Compare At:
-
$8.36
- You Save:
-
$4.15
Out Of Stock
Usually ships within 4 - 14 days
Genuine Ge part
By: Ge
Part Number: WC1X5134
Tinnerman nut clip secures components in your compactor or hood. Replace if loose, damaged, or missing to maintain proper assembly. Verify fit with model.
More
$4.21
- Compare At:
-
$8.36
- You Save:
-
$4.15
Out Of Stock
Usually ships within 4 - 14 days
Genuine Bosch part
By: Bosch
Part Number: 00415149
$8.95
- Compare At:
-
$9.88
- You Save:
-
$0.93
Out Of Stock
Usually ships within 4 - 14 days
Genuine Bosch part
By: Bosch
Part Number: 00415156
$6.95
- Compare At:
-
$7.54
- You Save:
-
$0.59
Out Of Stock
Usually ships within 4 - 14 days
Genuine Bosch part
By: Bosch
Part Number: 00415182
Replacement drawer roller for trash compactor units. Installs on the bottom of the compactor drawer to enable smooth gliding. Needed when worn or broken.
More
$18.27
- Compare At:
-
$21.92
- You Save:
-
$3.65
Out Of Stock
Usually ships within 4 - 14 days
Genuine Frigidaire part
By: Frigidaire
Part Number: 5304469097
$27.31
- Compare At:
-
$30.04
- You Save:
-
$2.73
Out Of Stock
Usually ships within 4 - 14 days
Genuine Frigidaire part
By: Frigidaire
Part Number: 5304469098
$51.74
- Compare At:
-
$52.36
- You Save:
-
$0.62
Out Of Stock
Usually ships within 4 - 14 days
Genuine Ge part
By: Ge
Part Number: WC01X10027
This wire clip secures appliance wiring and harnesses to the cabinet or chassis to prevent movement, chafing, and accidental contact. It helps maintain reliable electrical connections and reduces risk of shorts or wire damage. What it does:
- Holds wiring and harnesses in place to prevent rubbing, pinching, or contact with hot/moving parts
- Reduces strain on connectors to help prevent intermittent electrical issues
- Keeps wiring routed neatly for safer, more reliable operation
- Helps prevent shorts and abrasion-related failures
What's included: One wire clip Install notes:
- Disconnect power before starting any repair to avoid shock or damage
- Remove panels as needed to access the clip mounting location
- Clip typically snaps into a preformed hole or slides over the wire/harness; use pliers if needed for removal/installation
- Replace any damaged wiring or insulation found during installation
More
$10.50
- Compare At:
-
$11.55
- You Save:
-
$1.05
Out Of Stock
Usually ships within 4 - 14 days