10670214411 Parts

Color: Black

This press-in hole plug fills unused panel or console openings to restore a finished look and help keep out dirt and moisture. Simple, unobtrusive replacement that snaps into place for a clean, finished appearance. What it does:

• Covers unused holes in control panels, trim, or appliance housing for cosmetic repair
• Helps block dirt, dust, and small debris from entering interior cavities
• Maintains a flush surface so controls and trim fit properly
• Prevents moisture and contaminants from reaching internal components

• One press-in hole plug

• Designed to snap into a matching-size opening; press straight in until fully seated
• Disconnect power to the appliance before servicing if working near electrical components
• Use light hand pressure or a soft block to evenly seat the plug; do not force or use sharp tools

This temperature-sensitive switch controls the automatic defrost cycle. It opens to shut off the defrost heater when the evaporator warms to a safe level, protecting components and helping your refrigerator maintain consistent, frost-free cooling. What it does:

• Senses evaporator coil temperature during the defrost cycle
• Opens to cut power to the defrost heater at its calibrated limit; recloses when the coil cools
• Helps prevent overheating and supports proper automatic defrost operation
• Typical symptoms include heavy frost on the evaporator/freezer, poor cooling or a warm fresh-food section, the unit running constantly, or the defrost heater not cycling

• 1 thermostat

• Disconnect power to the appliance before servicing
• Allow the evaporator area to thaw and dry; handle wiring/connectors with care
• Mount the thermostat in the same location/orientation as the original; transfer/reuse any mounting clip or insulation
• Make secure electrical connections and route wires away from the heater; restore power and monitor a full cooling/defrost cycle

This 16-inch meat pan is a replacement oven accessory that catches drips and holds roasts or pans for even cooking. It restores oven functionality and keeps the oven interior cleaner during broiling and roasting. What it does:

• Collects drips and juices while roasting or broiling to protect the oven bottom
• Provides a flat, stable surface for small pans, roasts, and other bakeware
• Helps promote even heat distribution for items placed directly on the pan
• Reduces the need for frequent oven cleanings by containing spills

• One 16-inch meat pan

• Fits into existing oven rack slots; no tools required for installation
• Allow pan to cool before handling; use oven mitts when hot
• Inspect pan for warping or heavy corrosion before use; replace if damaged
• Follow oven manufacturer's guidance for broiling and cleaning to avoid damage

This replacement end cap restores the finished appearance of a damaged or missing refrigerator/freezer handle end and helps protect the handle mounting. It provides a clean cover for the handle end and reduces snagging. What it does:

• Covers and protects the exposed end of a door handle, hiding screws and fasteners
• Restores the appliance's clean, finished look after a cracked or missing end cap
• Helps prevent snagging on clothing or hands at the handle edge
• Matches original fit and appearance for straightforward cosmetic repair

• Basic installation; may require removing the handle or loosening fasteners for access
• Use appropriate hand tools and avoid over-tightening to prevent damage
• Keep small parts away from children during installation

This replacement lower front grille restores the finished look and directs airflow near the appliance base. It helps keep debris out of lower openings and provides a clean, finished appearance to the appliance front. What it does

• Covers and protects the lower front opening, helping prevent dust and debris from entering the cabinet area.
• Directs ventilation airflow where designed, supporting proper cooling of components behind the grille.
• Restores the appliance's exterior appearance when the original grille is cracked, dented, or missing.
• Fits into the lower front retainer and secures with factory fasteners.

• One lower front grille.

• Install requires removing the kick plate or access to the lower front; keep fasteners for reinstallation.
• Handle carefully to avoid scratching the finish; align tabs before snapping or fastening into place.
• Always disconnect power to the appliance before removing panels for service.
• If screws or clips are missing or damaged, replace with manufacturer-specified fasteners.

This small retainer clip secures a component or wiring harness to the appliance so parts stay aligned and rattle-free. It replaces a worn or broken fastener to restore proper fit and reduce noise or intermittent connections. What it does:

• Holds a panel, bracket, or wiring harness in place to prevent movement
• Keeps components aligned to ensure smooth operation and reduce vibration noise
• Helps maintain electrical connections by stabilizing wiring runs
• Common symptom: loose trim, rattling or vibrating parts, or intermittent wiring contact

• Disconnect power to the appliance before starting any work
• Remove the appropriate access panel or trim to reach the damaged clip
• Use pliers or a flat screwdriver to remove the old clip and snap the new clip into place
• Verify the secured part is seated correctly and test the appliance after reassembly

Color: White. Size: 1 qt. can. Acrylic appliance paint.

This front trim grille restores the appliance's lower/front appearance and helps protect internal components from dust and debris. It replaces a cracked, broken, or missing grille to improve looks and allow proper airflow. What it does

• Covers and protects the appliance's front/lower opening and internal components
• Keeps dirt and debris from entering the cabinet area
• Restores a neat, finished appearance after damage or wear
• Helps maintain proper airflow through the front vent area

• Disconnect power to the appliance before beginning any work
• Typically installs by aligning tabs and snapping or fastening into place; may require a screwdriver
• Handle carefully to avoid scratching the finished surfaces during installation
• If mounting hardware is broken or missing, replace with manufacturer-recommended fasteners

This end cap is the small trim piece that covers and finishes the exposed end of a refrigerator or appliance handle, restoring a clean look and protecting the handle mounting from dirt and wear. It's a direct-fit replacement piece that helps the handle look and function like new. What it does

• Covers the exposed end of a handle for a finished appearance
• Helps protect the handle mounting area from grime and wear
• Prevents sharp or unfinished edges from being exposed
• Can resolve issues with a loose or visually damaged handle end

• One end cap (handle end cap) as shown

• High-level task: usually installs by snapping into place or fastening with the existing screw; keep original hardware if present
• Use only the mounting hardware specified by the manufacturer; do not force or modify parts to fit
• If the handle or mounting is damaged, replace or repair those components before installing the end cap
• For safety, follow manufacturer instructions and disconnect power only if the procedure requires it (most handle/end-cap installs do not require power disconnection)

This clear outer control cover protects and finishes the appliance's user control area while keeping buttons and displays visible. It restores a clean, finished look and shields controls from spills, dust, and everyday wear. What it does:

• Protects the appliance control panel from spills, dust, and light impact
• Keeps buttons and display readable while preventing direct contact and grime buildup
• Replaces cracked, fogged, or missing covers that can trap debris or expose internal components
• Helps maintain a finished appearance and smooth button operation

• One clear outer control cover

• Disconnect power before starting any repair to avoid shock or injury
• Typically removed/replaced from the front/control panel—may require removing a trim or screws
• Handle carefully to avoid scratching or cracking the clear plastic during installation

A small retainer clip that secures panels, hoses or wiring to keep components in place and reduce noise from loose parts. Replacing a worn or broken clip restores proper fit and helps prevent intermittent contact or rattling. What it does

• Secures trim, panels, hoses or wire harnesses to mounting points to prevent movement.
• Keeps components aligned so switches and seals engage correctly.
• Stops rattling or vibrating noises caused by loose parts.
• Helps prevent abrasion or chafing of wires and hoses by holding them away from edges.

• Install by snapping or sliding the clip into the factory mounting slot; use needle-nose pliers if needed.
• Power off and unplug the appliance before accessing internal parts.
• Inspect surrounding mounts and mating tabs for damage; replace if worn for a secure fit.
• If removal is difficult, apply a small amount of penetrating lubricant and work carefully to avoid breaking adjacent plastic.