11027027600 Parts

The Relay is an OEM part for Whirlpool washers. It operates the washer's motor, providing the necessary electrical signal to start and control its movements. The motor relay helps regulate the speed and direction of the motor, allowing for washing and spinning cycles.

A bad motor relay can occur due to electrical issues, component failure, or power surges. If you notice symptoms such as the washer not starting or stopping abruptly during a cycle, unusual noises coming from the motor, or the motor not functioning at all, it may be time to replace this part.

Symptoms of a bad motor relay include:

• Washer not starting or stopping abruptly during a cycle
• Unusual noises coming from the motor
• Motor not functioning

Restore your Whirlpool washer by replacing the faulty or damaged motor relay with this genuine OEM part.

This OEM part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.
 

This cage nut has 5/16-18 threads and clips into a panel or frame opening to create a durable, replaceable threaded anchor. It restores a solid mounting point so screws can securely fasten panels, brackets, or hardware.

• Provides a 5/16-18 threaded anchor in thin sheet metal or chassis openings
• Secures panels, brackets, and components where factory threads are not possible or have stripped
• Helps eliminate looseness, rattling, or misalignment when a mounting point fails
• Symptoms of a failed/missing cage nut include a screw that won't tighten or hold, loose panels, and vibration noises

• Disconnect power and allow moving parts to stop before servicing
• Remove the screw and old cage nut; compress the new nut's tabs and snap it fully into the opening
• Align threads and start the screw by hand to avoid cross-threading
• Tighten the screw until snug; do not overtighten into sheet metal

This factory fastener secures appliance panels and components for a tight, rattle-free fit. Replace a missing, stripped, or corroded screw to keep assemblies aligned and performing as intended.

• Fastens panels, brackets, or assemblies in place
• Helps reduce vibration and rattling caused by loose hardware
• Maintains proper alignment of parts to prevent premature wear
• Common signs you need it: missing screw, loose panel, vibration/buzzing noises, or hardware that won't tighten

• Disconnect power; for gas or water-connected appliances, shut off supply lines before service
• Match the screw to the original; verify size, length, and thread before installation
• Start threads by hand to avoid cross-threading; use the correct driver bit
• Snug only—do not overtighten, especially into plastic or thin sheet metal

Size: 6 foot long. Washers not included. This is one hose, for a set with washers order 285363. For inlet hose screen use 285452A and for inlet hose washers use 285448A

A U-bend retainer designed to secure a U-shaped heating element or tubing in place, preventing movement and vibration for reliable operation. Fits as the replacement hold-down clip used on compatible Whirlpool HVAC and appliance assemblies. What it does:

• Secures U-shaped element or tubing to the appliance frame or mounting bracket
• Prevents rubbing or vibration that can lead to wear or noisy operation
• Helps maintain proper spacing and alignment of the element for consistent performance
• Used where a compact, U-shaped clamp is required to hold components safely

• One U-bend retainer clip as shown

• Inspect the surrounding area and replaced part for damage before installing
• Use basic hand tools; align clip over the U-bend and fasten to the designated mounting point
• Disconnect power and allow components to cool before attempting repair
• Replace with the exact OEM fasteners

This siphon break kit prevents wastewater from siphoning back into the dishwasher, helping keep the tub and dishes clean and reducing drainback issues. Fits the dishwasher drain assembly to restore proper draining function. What it does:

• Stops backflow by breaking the siphon effect in the drain line
• Works with the dishwasher drain hose and pump to maintain one-way drainage
• Helps address symptoms like water remaining in the tub, partial drains, or water backing into the tub
• Supports proper drainage to reduce odors caused by standing water

• One siphon break kit

• Disconnect power to the appliance and turn off the water supply before starting
• Inspect the drain hose routing and secure the siphon break at the recommended height per the dishwasher's service instructions
• Use basic hand tools; hose clamps or fasteners may be required

This wire harness routes power and signals between the appliance control and internal components to restore reliable electrical connections. It replaces a damaged or frayed harness to help eliminate intermittent operation and component power loss. What it does:

• Provides the factory wiring connections between the control, motors, switches, and sensors
• Replaces broken, burnt, or corroded wiring that can cause components to stop working
• Helps address symptoms such as intermittent operation, no power to a component, or electrical arcing
• Maintains proper connector fit and wire routing to prevent shorts and rubbing

• Disconnect power (unplug or switch off breaker) before starting any repair
• Handle connectors by the housings, not the wires; secure harness with existing clips or ties
• Test appliance operation after installation; revert power off before making adjustments

This upper wiring harness connects the washer's control panel and sensors to the main electronics, restoring reliable communication and power to the control area. It's used when controls, display, or related functions lose power or responsiveness. What it does:

• Routes and secures electrical connections between the control board, display, and user interface components
• Restores power and signal paths so buttons, touchpads, and indicators function correctly
• Common symptom: control panel is unresponsive or display shows errors/no power
• Common symptom: intermittent operation or machine won't start due to faulty panel wiring

• Disconnect power to the appliance before starting any repair
• Handle connectors carefully; match connector shapes and latch positions during installation
• Route harness along original clips and ties to avoid pinching or heat exposure

The Switch Mounting Screw is an OEM part compatible with Whirlpool washing machines. This screw securely mounts the cycle selector switch within the control console assembly. Proper fastening ensures dependable operation of control functions.  

Causes of a bad mounting screw can stem from stress cracks developing over multiple years of operation. Vibrations accumulate, slowly loosening connections housed in a wet environment.

Symptoms of a bad mounting screw include:

• Loose or rattling switch within the console face  
• Difficulty selecting cycles as buttons wobble out of place
• Water intrusion hastening corrosion of electrical terminals
• Potential shock hazards if live connections are exposed

This Whirlpool replacement screw restores a tight mounting point. It is compatible with brands like Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.

This is a replacement machine screw sized 8-18 x 3/8 that secures panels and components on compatible appliances. It restores proper fastening where a worn, stripped, or missing screw causes loose parts or rattling. What it does

• Fastens control panels, trim pieces, or brackets to the appliance chassis
• Replaces stripped, corroded, or missing screws that cause loose panels or vibrating noise
• Provides correct thread engagement for a secure hold in tapped holes
• Small hardware solution often used during door, console, or interior repairs

• One 8-18 x 3/8 machine screw (quantity: 1)

• Use the correct screw size and thread; do not force a different-size fastener into tapped holes
• Hand-start the screw to avoid cross-threading, then tighten with the appropriate screwdriver
• Disconnect power before accessing internal components or panels on electrical appliances
• If metal threads are damaged, repair with a helicoil or replace the damaged component rather than over-torquing

This 1/4-20 bolt secures appliance panels, brackets, and components to keep assemblies stable and aligned. It's a direct-fit fastener used where a standard 1/4-20 machine screw is required. What it does:

• Fastens panels, mounting brackets, and internal components to the appliance frame
• Prevents parts from shifting, vibrating, or producing rattling noises
• Restores proper alignment for components that won't sit flush or move under load
• Replaces corroded, stripped, or missing hardware that can cause loose assemblies

• One 1/4-20 bolt

• Disconnect power to the appliance before performing any repairs
• Use the correct socket or wrench for a secure fit; avoid rounded fasteners
• Tighten snugly but avoid over-torquing to prevent thread damage or stripped holes
• Ensure mating threads are clean and free of debris

This replacement power cord restores safe, consistent electrical connection to compatible electric ranges and ovens. Durable construction helps prevent intermittent power and heat-related damage so your appliance can heat and operate reliably. What it does:

• Replaces a damaged, frayed, or burned power cord that causes intermittent power or no power to the appliance
• Provides the main AC connection between the appliance and household electrical supply
• Helps prevent arcing, sparks, and overheating associated with worn or compromised cords
• Suitable when a visible cord fault or connector damage is present

• One power cord

• Disconnect power at the breaker or unplug the appliance before starting any work
• Tighten all terminal connections securely and route the cord away from heat sources and moving parts

This brace is a replacement mounting bracket that helps secure internal components and cabinet panels so moving parts stay aligned and your appliance operates more quietly and reliably. Simple, direct fit for service repairs. What it does

• Stabilizes and holds panels or assemblies in place to reduce vibration and movement
• Restores proper alignment of connected components for smoother operation
• Helps stop rattling or shifting that can cause noise during use
• Used when a bent, broken, or missing bracket is causing loose parts

• One brace

• Disconnect power (and water if applicable) before servicing the appliance.
• Remove the access panel or cabinet section needed to reach the damaged bracket.
• Replace the bracket using the original mounting screws and hardware; tighten securely but avoid overtightening.