11027027600 Parts

This genuine replacement part is a control board for washing machines. The control board is the main computer that controls the essential functions of the washer. If the washer is no longer spinning, rinsing, or draining properly, it might be time for a new control board. Luckily, replacing the control board is a simple process.To replace the control board, make sure the washer is unplugged. Pull the washer out to gain access to the upper back panel of the appliance. Remove the upper back panel and locate the old control board. Take note of the orientation of the wires with a phone camera. Remove the wire harness and individual wires. Connect the wires to the new control board in the correct order. Snap the control board back into its original place and reinstall the top panel of the dryer.This OEM replacement control board is compatible with Whirlpool brands include Whirlpool, Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Sears/Kenmore brand dryers.

The Strap is an OEM part for Whirlpool washing machines. It is a component located inside the washer tub that holds onto and spins the outer tub during the wash cycle. The strap washer plays an important role in securing the outer tub in place while continuously channeling rotational force to drive the washing action and clean clothes effectively. 

Causes of a bad strap can include wear and tear from years of use, damage due to impact or mishandling, or degradation from chemical exposure. 

Symptoms of a bad strap include:

• Excessive vibration or shaking during spin cycles
• Noise or grinding sounds coming from the washer tub area 
• The outer tub wobbling or moving more than usual
• Uneven agitation that fails to thoroughly clean all clothes

This OEM replacement is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.
 

This tub ring, also called the tub cover or splash ring, snaps around the top of the wash basket to contain water and suds. Replacing a cracked ring helps stop over-the-rim leaks and protects fabrics from rough edges.

• Acts as a splash guard at the rim to keep wash water and suds inside during wash and spin
• Provides a smooth upper edge to help prevent fabric snagging on broken plastic
• Restores a secure seal at the tub opening when the original ring is cracked or warped
• Typical signs of failure: water splashing or leaking from the top, visible cracks, or the ring not locking firmly to the tub

• Disconnect power and turn off water before servicing
• Open the top/console as required by your model to access the tub opening
• Release the old ring's locking tabs; transfer any attached retainers/hoses to the new ring if present
• Seat the new ring evenly and snap all tabs fully into place; run a quick test to check for leaks

This factory screw secures appliance panels and components, keeping them properly aligned and quiet during operation. Replace a stripped, corroded, or missing fastener to restore a snug fit and dependable performance in the original mounting location. What it does:

• Fastens brackets, panels, trim, or internal hardware to the cabinet/frame as specified by the manufacturer
• Helps maintain proper alignment and reduce rattling or vibration when a screw is worn or missing
• Direct replacement for damaged, stripped, or rusted hardware
• Used in various locations per the service diagram; match to the original position

• 1 screw

• Disconnect power (and shut off water or gas, if applicable) before servicing.
• Compare length and thread style to the original; install in the same location.
• Start threads by hand to avoid cross-threading; tighten until snug—do not overtighten.
• Reinstall any brackets or panels in the correct order.

This control panel is the console assembly that houses the oven/range user controls and display, restoring responsive button input and clear status feedback for normal operation. It replaces a worn, cracked, or unresponsive console to return reliable control. What it does:

• Provides the front-facing buttons, touch controls and display interface used to select bake, broil, timers and settings
• Routes user commands to the oven control board so cycles and temperature changes start correctly
• Commonly replaces panels that are cracked, faded, or have unresponsive buttons or missing indicators
• Helps resolve intermittent or no-response control inputs when the panel hardware is the failed component

• One control panel (console assembly) as shown

• Disconnect power to the appliance at the breaker before starting; electric shock hazard
• Handle the assembly carefully to avoid damaging the display, ribbon cables, and connectors
• Some models require removing trim, screws, or the oven door for access; keep fasteners organized
• If you see additional electronic damage or error codes after swap, verify the main control board and wiring harness

This clamp secures a washer or dryer hose to its connection to prevent leaks and keep the hose firmly in place during operation. It replaces worn or loose clamps that allow water to escape or hoses to detach. What it does:

• Holds a washer/dryer hose to a nipple, collar or fitting to maintain a sealed connection
• Prevents water leaks caused by loose or corroded clamps
• Stops hoses from slipping off during drain or fill cycles
• Restores proper hose retention and reduces risk of water damage

• Disconnect power and turn off the water supply before starting any repair
• Inspect hose and fitting for damage; replace hose if cracked or frayed
• Use appropriate pliers or a screwdriver for the clamp style; avoid overtightening to prevent hose damage
• Verify a leak-free connection after restoring power and water

This replacement silverware basket holds and organizes utensils in the dishwasher, keeping forks, knives and spoons secure for a thorough wash. It restores proper utensil placement to help prevent items from falling through the rack or blocking spray arms. What it does

• Holds and separates silverware and small utensils during the wash cycle
• Keeps items upright and contained so they receive consistent spray and cleaning
• Prevents utensils from falling into the wash tub or interfering with spray arms
• Replaces a cracked, broken or missing silverware basket for better wash performance

• No special tools typically required; remove the lower rack and set the basket into the rack slots or mounting pockets
• Make sure the basket sits securely so it does not shift during loading or cycles
• Handle edges carefully—plastic parts can be sharp if damaged
• If you notice additional rack damage or mounting clips broken, inspect those components before installation

This genuine replacement door lock assembly secures the appliance door and signals the control so cycles start and run properly. It restores proper door latching and electronic lock function for safe operation. What it does

• Physically latches the door closed to allow the appliance to run
• Contains the switch that tells the control board the door is locked/closed
• Can resolve symptoms like the appliance not starting, showing a door error, or stopping mid-cycle
• Replaces a worn or broken latch to restore reliable door closure

• One door lock assembly as shown

• Disconnect power before attempting replacement to avoid electrical shock
• Access typically requires removing the front panel or door trim; follow your model's service instructions
• Handle edges and mounting tabs carefully to avoid damage or injury

This door hinge secures and pivots a refrigerator or freezer door, restoring correct alignment and smooth opening. Use this replacement when a door droops, binds, or makes noise during operation. What it does:

• Provides a pivot point that supports the door and maintains alignment.
• Restores smooth opening and closing when original hinge is worn or bent.
• Helps prevent gaps that can cause cooling loss or uneven sealing.
• Reduces scraping, squeaking, or binding caused by a damaged hinge.

• One replacement hinge (single hinge assembly only)

• Disconnect power and empty door shelves before starting; support the door to prevent dropping.
• Follow OEM instructions for correct screw torque and hinge orientation; some doors require shims or spacer placement.
• Use appropriate hand tools; avoid overtightening fasteners to prevent damage.

This replacement insert is a small trim/retainer piece that restores proper fit and finish where a damaged or missing insert causes gaps or loose trim. It helps keep surrounding parts aligned and looking finished. What it does:

• Secures and supports adjacent trim or panel pieces to prevent rattling and misalignment
• Restores proper spacing and aesthetic appearance where the original insert is worn or broken
• Helps maintain seal and mechanical alignment for nearby components
• Common symptom: visible gap, loose trim, or panel that shifts when touched

• One insert (single replacement piece)

• Disconnect power to the appliance before starting any repair
• Installation typically involves snapping or sliding the insert into place; small fasteners may be used
• Handle trim pieces gently to avoid cracking or damage during installation

This genuine replacement screw secures components in compatible Whirlpool appliances, restoring proper fit and preventing rattles or loose panels. Use it when original fasteners are missing, stripped, or damaged. What it does:

• Fastens panels, brackets or small components to maintain structural stability
• Replaces missing or worn screws that cause vibration, rattling, or loose parts
• Restores secure connections after repairs or part replacements
• Helps prevent further damage by keeping parts properly aligned

• Turn off and unplug the appliance before servicing to avoid shock or injury
• Use the correct screwdriver or bit to avoid stripping the head
• Thread carefully and hand-start the screw to prevent cross-threading
• Keep small parts away from children and pets during installation

The Screw is an OEM component compatible with Whirlpool washing machines. This screw secures the rear panel onto the cabinet frame, ensuring a sturdy connection between housing components.  Proper installation is critical for the washer's structural integrity.

Causes of a bad screw include corrosion from repeated water exposure or stresses from years of use. Loosening can occur from vibrations weakening the threads over time. 

Symptoms of a bad screw include:

• Rear panel detaching from frame opening gaps
• Increased noise and vibrations from a compromised seal  
• Stress on other connections from improper mounting points
• Potential leak paths from openings near hoses or tub areas

This OEM Whirlpool replacement screw helps maintain a tight panel closure. It is compatible with additional brands like Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.