1490Wh01 Parts

This replacement part is a washer. This part is small but important in various types of equipment. Washers work with other small parts like screws and nuts to ensure that multiple parts are secure and in place during use.A new washer might be needed if the current one is worn down or damaged. It is not uncommon for washers to become dented or otherwise damaged over time due to friction and normal wear and tear within the machine. Work gloves are recommended when working with small parts like washers. Be sure the engine is powered down before attempting to complete this job.This is a genuine OEM replacement part manufactured by MTD. This part is sold individually.

This replacement part is a washer. This is a genuine replacement part made by MTD. This specific washer is an important part of various machinery. These small pieces are responsible for working together with other small parts to help ensure the proper functioning of any machine. It also allows for parts to stay in secure during use. A new washer might be needed if the current one is visibly missing or damaged. Washers can become stripped over time and might not stay in place. If this is the case it is recommended that it be replaced. This repair should be easy and only require a screwdriver. Be sure the engine is completely powered down before attempting this repair. This part is sold individually and is sourced directly from the manufacturer. This washer is a genuine OEM replacement part.

This .498 x 1.64-inch wheel shoulder bolt is a genuine OEM part sourced directly from the manufacturer. It is made for use on lawnmowers, edgers, and tillers to fasten the wheel to the frame. Shoulder bolts have three sections: the visible head, an unthreaded section called the shoulder, and the threaded section for locking it in place. The shoulder or unthreaded area allows the wheel to rotate. This shoulder bolt will have a spring washer installed before the wheel is installed. A locking nut is used on the opposite side to ensure the wheel is secure.If the lawnmower wheel or other equipment wheel needs to be replaced or the shoulder bolt becomes rusted, causing friction when pushing the mower, this replacement part is easy to install. First, the nut holding the shoulder bolt and wheel in place is removed with a wrench. The shoulder bolt is then pulled out from the opposite side. Install the new shoulder bolt, followed by the remaining wheel parts. Reinstall the nut to hold the wheel in place.The shoulder bolt is made of high-tensile metal to withstand the friction and weight of the moving machinery. It is designed for use with Craftsman, Cub Cadet, Troy-Bilt, Husky, Yard Machines, MTD, Huskee, Montgomery Wards, Bolens, Yard-Man, and MasterCut lawn mowers, tillers, and edgers. It is sold individually.

This OEM replacement lower steering shaft is used to connect the lower steering assembly to the wheel axle to help control steering and allow safe operation and control of the unit. This lower steering shaft is made for use with lawn mowers and tractors, specifically. It is a durable metal part that is subject to constant vibrations and repetitive motion. Over time, it can wear or become damaged due to impact or another incident. If the lower steering shaft is damaged, the unit will not be able to steer properly and operate safely until a replacement is made. This genuine OEM part will provide an exact fit for compatible models from MTD and Yard Man. It will be important to disconnect the power and situate the appliance properly for a safe repair, including working in a well-ventilated area. Always wear gloves when working on lawn mowers and tractors to protect the hands. This lower steering shaft is sold as an individual part and additional hardware or parts will require a separate purchase.

This is a genuine replacement idler bracket that is used with lawnmowers. This bracket is used to hold the pulley and belts in place while also protecting them. An idler bracket that is worn, rusted, or damaged should be replaced to avoid damage to the mower's pulleys and belts.The process for replacing this part will vary depending on the model of the mower, so consult the equipment's manual and diagrams for specific instructions. To replace, a wrench or socket set of the correct size is needed. The idler bracket is located above the pulley systems in the mower deck. Remove the mower deck from the mower by unbolting the attaching arms. Depending on the machine, remove all items attached to the idler bracket. Replace idler bracket and attachments, and reattach the mower deck to the bottom of the mower. This is a genuine MTD replacement part. This part is compatible with Yard Machines, MTD, Huskee, and Yard-Man lawn mowers. This part is sold separately.

This part is a replacement flange bearing. This is a genuine OEM part made by MTD and has been sourced directly from the manufacturer. If the current flange bearing is defective or broken, this part can be used as a replacement. It is intended for use with a variety of lawn mower models.Flange bearings prevent components of the lawn mower from creating excess friction or vibration. This particular flange bearing can be found between the pivot bar and the flat washer. It will require replacement if worn, corroded, lost, or faulty. When working on or near an engine, always ensure that the equipment is powered off and completely cooled down before attempting to undergo any repairs. For more accurate information on how and where to install this flange bearing, the appropriate owner's manual and equipment diagrams should be referred to. This flange bearing is suitable for use on a variety of lawn mower models manufactured by MTD, Craftsman, Troy-Bilt, other brands. It is a genuine OEM part and thus is made of high-quality, durable materials. Part sold individually.

This replacement part is a flanged bearing. This is a genuine replacement part made by MTD. A flanged bearing is similar to a regular bearing but it contains an extension around the outer lip to allow for an easier mounting in the needed position. A new flanged bearing might be needed if the current one is missing or damaged in any way. This can be caused by wear and tear after years of normal use. Bearings often experience friction over time. This can cause the part to become worn down. When this happens, be sure to replace this part as soon as possible. Refer to the specific user manual before attempting to replace this part. This part is sold individually and is sourced directly from the manufacturer to ensure proper fit. This part is a genuine OEM replacement part made for long-lasting use.

This replacement part is a blade. This is a genuine replacement part made by MTD. Blades are commonly found in lawn mowers and are used to cut or trim grass during use. A new blade might be needed if the lawn mower is no longer cutting grass effectively. If the blade has been used for a long while, it may have become dulled and is no longer sharp enough to perform. If this is the case, the blade should be replaced. Wear work gloves while replacing this part as the blades are extremely sharp when brand new. Be sure the engine is powered down as well to prevent injury. This is a genuine OEM replacement part and is sold individually.

This spacer is a genuine MTD part, sold individually. This spacer can be used as a replacement part in a lawn mower. The purpose of the spacer in a lawn mower is to serve as a fastening component that is put between one or more components in order to keep them apart from one another, which serves the function of reducing friction between those components while the appliance is in use.The spacer in a lawn mower is a small component that can be very easily lost or misplaced during typical use of the appliance; if the spacer is lost, the user of the appliance might not necessarily notice its absence right away, as its absence will not alter the functionality of the appliance. But if the spacer is missing, it should be replaced as soon as possible in order to guarantee the safekeeping of the components into which the spacer is integrated.This is a genuine OEM replacement part sourced directly from the manufacturer. It is sold individually. This spacer is compatible with the following outdoor appliance brands: MTD, Yard Machines, Huskee, and Yard Man.

This genuine OEM part is a pivot bar assembly for riding lawnmowers. The pivot bar assembly is a rectangular metal piece that assists with the mowers steering functions. If the mower steering is no longer aligned properly and is not driving straight, the pivot bar assembly will need to be replaced. Luckily, this repair is a relatively easy job. To begin, start by making sure the ignition is in the off position and the engine has cooled. After that, lower the mower deck to its lowest position. Remove the retaining pin supporting the support arms and detach the arms to release the mower deck from the frame. Once released, remove the deck belt from the engine pulley and the belt guides. Detach the clutch cable from the retainer. Slide the deck out from under the frame and pull off the steering will cover by unthreading the mounting nuts that secure the wheel. After removing the nuts, pull off the steering wheel. Unthread the fuel tank mounting bolts and set the tank aside. Using a floor jack, lift up the front end of the mower and use pliers to remove the spring clip securing the steering shaft, and use a socket wrench to unthread the steering support mounting bolts. Once removed, push the steering shaft down, and slide the washers that hold the pivot bar assembly. Install the new pivot bar assembly in its correct position by aligning it to the support. Secure the mounting bolts. This replacement part is sold individually and is compatible with MTD brand lawnmowers.