1572D427 Parts

This is a genuine replacement piston assembly for Briggs & Stratton lawn tractors. It is responsible for compressing the fuel and air mixture inside the cylinder prior to ignition. Several O-rings are used to ensure a tight seal for more power in the ignition.The piston assembly is made of hardened steel capable of withstanding an incredible amount of pressure during ignition. The O-rings and clips in the kit are made of rubber and PVC material also made to withstand extreme pressure and heat. Though not common, the piston itself can fail with extreme use. More commonly, the seals break down and require replacing. Our piston assembly is a genuine OEM replacement part, sold individually. It is compatible with many Briggs & Stratton tractors.

This is a flywheel key that is used in many types of lawn and garden equipment. It is fits into a slot located on the crankshaft. It also aligns with the keyway found on the flywheel. This flywheel key is tasked with ensuring the flywheel makes rotations in time with the crankshaft. The key can become damaged or lose and will need to be replaced to ensure the lawn equipment can continue to be used.Inspecting the flywheel key involves removing the gas tank and cowl from the equipment. From there, a user can determine whether the part is damaged or broken. If it needs to be replaced, the part can be removed from the flywheel, and a new flywheel key can be installed. The process takes little time and requires only a nut driver and a wrench set. Make sure to reassemble all parts before using the tool.This flywheel key is an authentic OEM replacement component sourced directly from the manufacturer. It is sold as a single part. The key can be used with wood chippers, leaf blowers, tillers, and lawnmowers manufactured by Simplicity, Briggs & Stratton, Cub Cadet, and Snapper.

This part is a replacement float bowl gasket. This is a genuine OEM part made by Midwest Engine and has been sourced directly from the manufacturer. This part is intended for use as a replacement in a snapped, worn, or otherwise defective float bowl gasket in various engines. This float bowl gasket seals the gap between the float bowl and the carburetor, which helps to prevent fuel from leaking. Gaskets are particularly subject to wear and tear, and over time will become weathered, brittle, or otherwise deteriorated, thus requiring replacement. If you notice fuel leaking from the engine, this gasket may need to be replaced. Wear work gloves to protect the hands and check that equipment is powered off and cooled down before starting the repair process. For more accurate information on how and where to install this float bowl gasket, the appropriate owner's manual and equipment diagrams should be referred to. This float bowl gasket is a genuine OEM part made of durable materials and is sold individually. It is suitable for use with small engines that have been manufactured by Midwest Engine and Briggs and Stratton.

This replacement part is a float bowl. This part is a small part of the carburetor and is able to hold a small amount of liquid gasoline. This serves as a reservoir for fuel.If the engine is unable to run due to lack of fuel, it might be because of a malfunctioning float bowl. Be sure to wear work gloves during this repair as working near the carburetor might be dangerous in certain situations. This is a genuine replacement part made by Midwest Engine. It is an OEM replacement part which will ensure a proper fit. This part is sold individually.

This sealing washer is a genuine Midwest Engine part, sold individually. This sealing washer can be used as a replacement part for a variety of small engine outdoor appliances including chipper shredders, lawn mowers, and tillers. The purpose of a sealing washer is to create space between fastening components so they are not damaged by friction.The sealing washer of an outdoor appliance might have to be replaced if it is lost, misplaced, or damaged to the point that it cannot serve its function. The sealing washer could be stripped over time from general wear and tear or, as it is a small part, can be lost or misplaced easily. If this occurs, the component should be replaced by this genuine OEM replacement part. Remember to always wear gloves when handling, repairing, and operating outdoor equipment. Always unplug the appliance before performing any kind of repair or replacement.This is an OEM part sourced directly from the manufacturer. It is sold individually. This sealing washer is compatible with the following outdoor appliance brands: Midwest Engine, Briggs & Stratton, and Cub Cadet.

This replacement part is a carburetor overhaul kit. This kit includes multiple parts that are needed to rebuild or repair a damaged carburetor.Be sure to diagnose the issue before purchasing this kit to ensure that the needed parts are included. A damaged carburetor may cause hard starting or black smoke exhaust during use. Wear work gloves when working with the carburetor. The engine should be powered down and cooled off before starting this job.This is a genuine OEM replacement part manufactured by Midwest Engine. This part is sold individually.

This starter rewind, also called a pull start, rope start, or recoil starter, is a genuine OEM part made by Midwest Engine. A starter rewind is a component of an internal combustion engine on an appliance used to start and set the engine in motion. This starter rewind replacement part works with engines, chipper shredders, lawn mowers, leaf blowers, and tillers. With extended long-term use, starter rewinds can be subject to damage, malfunction, and disrepair. This damage can only grow worse with further usage, so it is recommended that the problem be addressed when a starter rewind either grows detached, becomes frayed, or breaks entirely. It will be obvious if a starter rewind is not working, as the engine will not start. This could manifest visually in issues with the pull cord not catching or the engine simply stalling or giving out entirely. This will require, at a bare minimum, a replacement starter rewind. Always wear gloves when handling, repairing, and operating outdoor equipment.This starter rewind works with the brands Briggs and Stratton, Cub Cadet, Toro, and Simplicity. Part sold individually, and any additional hardware needed will have to be purchased separately.

This screw is designed to be used on all sorts of lawn and garden equipment. The metal screw is durable and attaches to the muff guard bracket to keep it in place and stable while the equipment is being used. This screw can become damaged through overuse or wear and tear. It can also break or become stripped, which will require it to be replaced.Visually inspecting the area with the muff guard bracket is connected to the rest of the equipment will give information about whether the screw is broken or damaged. The screws can also be cleaned to be more visible so small problems are easier to pick up on. Sometimes the screws can become loose, which is another situation where a replacement is needed. Simply use a screwdriver to take out the old screw and replace it with a new one.This screw is a genuine OEM replacement part that is directly sourced from the manufacturer. It comes as an individual part. The screw can be used on snowblowers, lawnmowers, lawn tractors, tillers, pressure washers, leaf blowers, edgers, generators, wood chippers, and log splitters made by MasterCut, Simplicity, MTD, Snapper, Lawn-Boy, Wheel Horse, Cub Cadet, Toro, Craftsman, and Briggs & Stratton.