165D5450p001 Parts

This fuel tank assembly can be used as a replacement part for the small engine of a snowblower or a tiller. The fuel tank assembly contains the fuel tank as well as the parts required to install the part. The purpose of the fuel tank is to store fuel for the engine and dispense the fuel in order to power the engine.A fuel tank assembly might be ordered as a complete replacement part if the fuel tank and its components suffer damage. This damage might manifest in the form of fuel leakages from punctures, holes, or corrosion to the material. If this damage affects the fuel tank and its components, it should be removed and replaced before using the appliance again. Remember to always wear gloves when handling, repairing, and operating outdoor equipment. This is an OEM part sourced directly from the manufacturer, MTD. It is sold individually. This fuel tank assembly is compatible with the following brands: MTD, Troy-Bilt, Yard Man, and Cub Cadet.

The recoil starter assembly is comprised of the housing, the recoil spring, the starter pulley, the starter rope, and the plastic starter grip. It creates the motion that spins the flywheel to engage the engine. The grip is pulled, which extends the rope and activates the starter spring, which then engages the starter pulley and the flywheel, respectively. Over time, various components of the recoil starter can become damaged or worn with regular use. This is often going to require a replacement and in most cases, it will be easier to replace the entire assembly than a single component. This genuine OEM recoil starter is manufactured by MTD and is made to exact standards. It can be used with more than 150 MTD engines on lawn equipment, including from brands like Craftsman, Bolens, Yard-Man, Yard Machines, Remington, Husky, RYOBI, and Cub Cadet. This replacement assembly includes a limited parts warranty and includes all components: the plastic housing, starter pulley, pull rope, starter grip, and starter spring. The hardware for securing this housing is sold separately.

This replacement part is a stud, and it is intended for use in different types of lawn equipment. This is a genuine replacement part made by MTD. Studs are typically found in or around the carburetor in many lawn mowers. These studs hold specific parts in place and keep the engine running smoothly and efficiently. A new stud might be needed if the user notices that different parts of the carburetor are loose or even missing. It is possible that the previous studs become stripped or worn down over time due to normal wear and tear. It's possible that the stud can become stuck as well, and the user might need pliers to retrieve and replace it with a new part. This replacement part is sold individually and is a genuine OEM part sourced directly from the manufacturer. Be sure to purchase the correct amount of studs as many machines require more than one for proper operations.

This replacement part is a stud, and it is intended for use in different types of lawn equipment. This is a genuine replacement part made by MTD. This stud is used in different placed inside and around the engine. This part is able to hold things together and ensure that different parts are secure and tight. A new stud might be needed if the current one is damaged or missing. It is possible that studs can become stripped overtime or get lodged inside a small area. If this happens it is best to replace this part so that the appliance can operate smoothly. Be sure the engine is completely powered off before attempting to replace this part. Reference the specific user guides prior to replacing a stud.This is a small stud sourced directly from the manufacturer. This part is sold individually. Be sure to purchase the correct amount as many appliance require more than one to operate properly.

The breather hose is designed as a valve or vent that only functions one way. It allows air into the fuel tank but ensures that no air or emissions escape the tank. When this hose is not functioning, emissions and air could be leaking from the tank and cause the engine to perform poorly or not perform at all. The hose could become cracked or damaged, or the ends could lose their seal. Either way, a replacement hose will solve the problem and get the equipment back in order. This genuine OEM replacement breather hose is made by MTD and manufactured to exact specifications. It is compatible with several engines on lawn mowers, snowblowers, and chippers from brands like Troy-Bilt, MTD, Yard-Man, Yard Machines, Bolens, Cub Cadet, and Husky. There are more than 150 compatible machines for this breather hose. This high-quality composite rubber hose is sold individually.

This is a valve adjusting nut that is an integral part of many different types of lawn and garden equipment, such as lawnmowers, trimmers, and snowblowers. The location of the part will vary based on the model. Users can refer to the equipment's diagram to determine where the component is located. The nut acts as a fastener and is made of durable metal. However, it can be damaged, may break, or become lost and will need to be replaced.If the valve adjusting nut is damaged or missing, it will need to be replaced. A pair of work gloves and basic tools will be needed for the process. Take the lawn and garden equipment and place it on a level surface before removing the spark plug wire. Access the location of the nut and remove it before installing the new replacement part.This is a genuine OEM replacement part that is directly sourced from the manufacturer. The valve adjusting nut is sold as an individual item. The part is made to be compatible with snowblowers, lawnmowers, string trimmers, leaf blowers, edgers, log splitters, wood chippers, and tillers manufactured by MTD, Troy-Bilt, Yard Machines, Craftsman, Cub Cadet, Huskee, MasterCut, and Yard-Man.

This genuine replacement part is an air filter heating cover for snowblowers. The air filter heating pipe cover is the plastic piece that covers the heating pipe of a snowblower. This cover is meant to protect the user from burning themselves on the heating pipe while using the machine. If the heating pipe cover is damaged to the point where it is no longer covering the heating pipe, it should be replaced. Thankfully, replacing this part is a simple process.To replace the heating pipe cover, locate the mounting screws that secure it to the snowblower. Before removing, make sure the engine has cooled to avoid getting burned. Once located, remove the mounting screws that attach the cover. Once removed, replace with the new cover and fasten the screws tightly. This OEM replacement part is sold individually and is compatible with MTD brand snowblowers.

This part is an ignition coil assembly. This is a genuine OEM part and has been sourced directly from the manufacturer. This part is intended to replace a deteriorated, detached, or broken ignition coil on certain outdoor power equipment models. Ignition coils are essential for transforming battery voltage into an electrical spark to ignite fuel and start the engine. Over time and with regular usage, ignition coils can easily become worn out and affect the performance of outdoor power equipment. Signs of a failing ignition coil include engine misfires, inability to start equipment, and rough idling. Please be aware that proper tools are needed to replace this part and correct safety measures should always be followed when working on any type of equipment. For the most accurate information on installing this replacement ignition coil, specific manufacturer diagrams should always be referenced.As an authentic replacement part, this ignition coil assembly can be used on multiple different models of Craftsman, Cub Cadet, Troy-Bilt, MTD, and Husky snow blowers. Please note that this ignition coil assembly is a genuine part made of high-quality materials and is sold individually.