202Kwat7f680 Parts

The pre-cleaner is usually placed over the actual air filter and is designed to catch debris and emissions before they enter the air filter, which will then clean the rest of the air going through the machine. The pre-cleaner can become dirty and clogged with debris as a part of regular use. As such, it should be replaced as part of a regular maintenance routine. However, it may also need to be replaced intermittently if it becomes clogged. An air filter or pre-cleaner is clogged if the engine will not run as smoothly as it should. Always check the manual for compatibility and part numbers, as well as any safety and replacement recommendations. This unit can be installed dry and does not require any special preparation or pre-oiling. This part replacement is suggested as maintenance because you may not be able to tell it is dirty until it is removed from the air filter, but a replacement is easy to perform. This OEM replacement pre-cleaner is compatible with various models of air filters in Briggs & Stratton engines. Be sure to check your user manual for part number compatibility and always wear gloves when replacing engine components.

This filter is used for lawn and garden equipment. A dirty or clogged filter could cause the engine to run poorly.

This is an OEM replacement part for the recoil pulley and spring assembly, also called the rewind pulley and spring. The recoil starter, which is operated by a rope, will engage the drive cup on the flywheel, which will start the engine when it is pulled. These are commonly found on lawnmowers and similar outdoor equipment. If the rewind begins to bind when pulling the rope, or if it does not rewind easily, it could indicate that a replacement is needed. In addition, if the plastic on the old pulley is worn and cracked, it is a good idea to replace it before it fails entirely. This OEM assembly comes from the manufacturer and includes the pulley and the spring. The pulley is made from plastic, and the spring is metal. The part can be used for a range of machines and brands. The pulley and spring assembly are compatible with lawnmowers, tillers, and other small engines from brands like Craftsman, Briggs & Stratton, Snapper, Lawn-Boy, Toro, and Cub Cadet.

This is a push rod designed to work in a lawnmower engine. Push rods serve a vital purpose in internal combustion engines. When combustion occurs, it creates not just heat and energy, but also exhaust gases. The push rod helps vent those gases so they don't choke the engine out. The push rod attaches to the camshaft, and, as the shaft turns, the rod opens the exhaust valve. Push rods are subject to high temperatures, as well as wear and tear. They can also be damaged if the engine stops unexpectedly. Bent or otherwise damaged push rods can compromise engine performance, reduce power, or even result in engine failure and cause damage to other parts. Replacing the push rod will require the disassembly of the entire engine. Replacing the tappet valve will require removing the head, as well. This is an OEM part manufactured to exacting specifications and designed to work with Briggs & Stratton engines installed on over 150 different machines. It includes a single push rod and a tappet valve.

This is the rocker cover gasket, which seals the cylinder head on small engines so that the engine doesn’t develop leaks. Periodically, a gasket may deteriorate with heavy use. To maintain good engine performance, the rocker cover gasket needs to be replaced with an OEM certified replacement. This type of gasket is most often found on lawn tractors. Replacing the original gasket with the new one is a simple and straightforward process. There are four bolts holding the valve cover in place. Simply remove them and the old gasket, which will likely have to be scraped to get it completely off the cylinder head. Place the new gasket exactly over the metal frame of the cylinder head—it should fit perfectly. Hold it in place with a small amount of RTV, a silicon sealer that is impermeable to oil and gasoline. Replace and tighten the four valve cover bolts. This part is made by Genuine Midwest Engine. This part is used in Briggs & Stratton engines and also used by Toro and Vanguard. This is an OEM part. It's also sold individually.

This genuine starter solenoid transfers electrical current from the battery to the starter during the engine starting process, allowing the engine to engage. This part could become worn over time or develop electrical malfunctions, which could eventually lead to a need for a full replacement. In the event that the solenoid goes bad, it could result in poor engine performance or not permit the engine to start at all. This replacement part could provide an exact fit for compatible lawn and garden units. This genuine OEM solenoid from Briggs & Stratton is manufactured to exact specifications. It is compatible with engines used in select models of generators and other lawn and garden equipment made by the brand. This genuine OEM part is sold individually and does not include any hardware or additional components. It is imperative to disengage the spark plug and allow the engine to cool before performing engine repairs like replacing the starter solenoid. A wrench or socket set will be required to disconnect the old solenoid and install the new unit and gloves should be worn for hand protection.

This air cleaner gasket is a genuine Midwest Engine replacement part for appliances that use small engines, such as wood-chippers, snowblowers, leaf blowers, and lawn mowers. The function of an air cleaner gasket is to seal off and protect the engine from the accumulation of dirt, debris, and gunk in the infrastructure.The air cleaner gasket could be subject to damage from overuse or general wear and tear. If the air cleaner gasket is not sealing, thereby preventing the primer bulb from operating as usual and failing to protect the engine from outside dirt and debris, the part should be replaced immediately. The appliance at hand should not be used until the air cleaner gasket has been replaced. Before purchasing a replacement air cleaner gasket, determine whether or not the problem in question is attributable directly to the air cleaner gasket or if the engine is malfunctioning for another reason.This air cleaner gasket is compatible with the following brands: Briggs and Stratton, Simplicity, and Cub Cadet. This part sold individually.

The pawl friction plate on lawn and garden engines is an essential part of the starter assembly that is needed to crank start the machine. It provides power to the starter cup. If the engine on a machine will not start, it could be due to a broken or worn pawl friction plate. Replace the plate immediately to ensure your machine is working properly. This is genuine OEM part is compatible with a range of product types, including lawnmowers, snowblowers, tillers, pressure washers, generators, log splitters, wood chippers, leaf blowers, and chippers. Compatible brands include Briggs & Stratton, Craftsman, Cub Cadet, Lawn-Boy, Snapper, Simplicity, and Toro. The part is sold individually. Keep in mind that this only includes the pawl friction plate. It does not contain the screw or spring, and these will need to be purchased separately.

This is a genuine float needle valve that is designed to be used in select small engines found in lawn tractors. The float needle is located in the carburetor and is responsible for assisting with the intake and outflow of gas through the assembly. As the fuel bowl in the carburetor fills and drains, this needle regulates how much fuel is present to ensure the proper operation of the engine. Over time, the valve can become cracked or get damaged because of repetitive motion and exposure to high heat. This could impact the flow of fuel and the engine performance, or cause the engine to fail completely. This genuine OEM float needle valve is manufactured to exact standards as an identical replacement for select Briggs & Stratton small engines found in lawn tractors. It can also be used with certain models from Toro and Vanguard. It is sold as an individual unit and made of durable plastic. Be sure to drain the fuel from the engine and allow it to cool before doing any repairs. Gloves are also recommended for safety. For those who need additional components, this valve may also be available as part of a compatible carburetor rebuild kit.

This is a carburetor overhaul kit. This kit contains all of the needed components to rebuild the carburetor for lawn and garden equipment engines. A carburetor mixes fuel and air before delivering it to the engine. The diaphragm helps regulate the amount of fuel that is in this mixture. The gaskets create a seal that keeps unnecessary air out so that the engine works properly.A carburetor overhaul kit is needed to fix problems including worn-out gaskets or diaphragms, gas or air leaks, and sluggish performance. Signs that there are carburetor issues include engine roughness when it's at idle, engine vibrations, misfires, or it hesitates under acceleration. Signs that the carburetor diaphragm has gone bad include the engine not starting, cutting off while running, producing excessive smoke, or revving on its own. All of these signs indicate that a carburetor overhaul kit is needed.This part is a genuine Midwest Engine part and is an OEM part sourced directly from the manufacturer and it is sold individually. This kit is compatible with lawn tractors manufactured by Midwest Engine and Briggs & Stratton.

This is an oval c-sunk screw commonly used in mowers and snowblowers to help secure the throttle housing to the upper handle. If there is a problem with the screw, it should be replaced to ensure the proper function of the machine.The screw is made from metal and it should last a long time. However, there could be several reasons to replace the screw. It might become lost when working on other parts of the machine. The threads could be stripped, or the head of the screw could start to wear away or corrode over time. Replacement of this piece is usually fast and easy, but it can depend on the location of the screw.The oval c-sunk screw will work with models of machines from MTD, Mastercut, Husky, Western Sun, Lawn Hawk, Wizard, Servistar, and Tradesman. The screw is sold individually. It is a genuine OEM replacement part.

This replacement screw fastens appliance panels and components to restore secure mounting and stop rattling or loose parts. A basic, direct-fit fastener for routine repairs and reassembly. What it does:

• Secures panels, brackets, trim, or internal components to prevent movement and vibration
• Replaces missing or stripped screws that cause loose parts or rattling noises
• Restores reliable fastener retention for safe, stable operation
• Works wherever the OEM-specified screw is required for proper assembly

• Use the matching driver/socket and turn slowly to avoid stripping the head or threads
• Tighten until snug; do not over-torque to prevent damage to threads or housings
• Power off and unplug the appliance before attempting any repair
• If other fasteners or damaged mating threads are found, inspect surrounding components and replace as needed

This is the front wheel assembly that is used by a large number of manufactures as the standard wheel for push mowers. This wheel is a tough, black rubber wheel fitted onto a sturdy white chassis. Since it is not a pneumatic wheel, there is no concern that it will roll over hidden debris and be damaged. Push wheels such as these often last the lifetime of a Lawn Mower. However, there are occasions when the housing of the mower is dropped and the wheel becomes warped or broken. It's also the case that, with constant use, the wheels can lose tread, making them harder to maneuver in tough mowing conditions. It has also been reported that the tires will wear and become smaller in circumference over time, meaning it will require more gasoline to mow the same amount of yard. The front wheels are easily replaced. After removing the plug cap and stabilizing the mower, simply use a socket wrench to remove the center bolt from the wheel. It's a good idea to use a dry lubricant like graphite on the axle before replacing it. This OEM guaranteed replacement part is compatible with Ryobi, Yard Machines, Troy-Bilt, Cub Cadet, Husky, Yard-Man, and MTD push mowers.

This replacement part is an adjuster kit. It is a genuine replacement part made by MTD. This adjuster kit is typically found in lawnmowers and is responsible for assisting the user in changing the height of the blades so that the user may determine the setting which the grass is cut at. A new adjuster kit might be needed if the user is unable to adjust the height of the blades and therefore cannot perform the necessary duties. If the blades are stuck at one height it is possible that the adjuster kit is to blame. Because this part is located close to dangerous objects it is recommended that work gloves be worn for protection. This is a genuine OEM replacement part to ensure proper fit and long-lasting use. Note that part is sold individually and is sourced directly from the manufacturer.

This is a genuine replacement fuel tank cap for select Briggs & Stratton engines. It seals the fuel tank to keep the fuel contained and also to create the pressure required to run the fuel system and lead to the combustion process. The fuel cap screws onto the fuel tank and can become worn over time. The cap can also become damaged due to an impact or another incident. In some cases, the cap can get lost or the threads can break or strip entirely. A replacement cap like this one can be the solution for compatible models. This OEM fuel tank cap is manufactured to specific standards by Briggs & Stratton and will fit select models of vertical and industrial engines, including 3.5, 5, 7, 9, and 12.5 HP models. It can also be used on select Toro, Murray, Simplicity, and Snapper models that have a Biggs & Stratton engine and/or fuel tank. The non-vented cap ensures appropriate sealing and fuel containment, and it is made of durable composite plastic material. This fuel tank cap is sold individually. No tools are required to replace this part.

This fuel tank is a genuine OEM replacement part for a wide range of snowblowers and blower vacuums. The fuel tank is located on the exterior of an appliance and allows the operator to top up their machine with more fuel. The fuel tank connects to the carburetor through a fuel line and feeds the engine gasoline to create power. This fuel tank holds roughly 2.8 liters, or 3 quarts, of fuel. Although fuel tanks are made of durable reinforced plastic, they can be knocked easily due to their position on the outside of an appliance. If punctured or dented, fuel will start to leak from the tank and present a potential fire hazard. For safety reasons, a damaged fuel tank should be replaced as soon as possible. Using a set of wrenches, unbolt the damaged tank and reassemble with this replacement part. As a high-quality replacement part, this fuel tank comes sourced from its original manufacturer. It is compatible with Briggs & Stratton and Toro appliances. This tank includes a fuel cap but does not include a fuel line or the hardware needed for assembly.