205C-2981-Pod-112 Parts

This water filter manifold directs and seals the water flow to the refrigerator's filter housing so your dispenser and ice maker receive filtered water. Replaces a damaged or leaking manifold to restore proper water routing and pressure to the filter area. What it does:

• Channels incoming water into the filter housing and back to the dispenser/ice maker
• Provides mounting and a sealed connection point for the cartridge-style filter
• Commonly replaced for leaks, reduced water flow, or when the filter won't seat properly
• Works with the refrigerator's internal water plumbing and filter housing assembly

• One water filter manifold

• Turn off the refrigerator water supply and disconnect power before servicing
• Drain remaining water from lines and wear eye protection to avoid spills
• Inspect O-rings/seals and replace if damaged; hand-tighten fittings and avoid over-torquing

This dual-solenoid water valve controls water flow to the refrigerator dispenser and icemaker, restoring fill and dispensing when the machine calls for water. Replaces a worn or leaking valve to stop drips and restore normal water delivery. What it does:

• Opens and closes water flow to the icemaker and dispenser when energized
• Stops water flow when the appliance signals a fill cycle is complete
• Commonly replaced for leaks, no water to dispenser, or no water to the icemaker
• Works with the refrigerator's water supply line and wiring harness

• Turn off water supply and disconnect power before starting any repairs
• Inspect and replace any worn inlet tubing or mounting hardware as needed

This is the refrigerator door bin that mounts into the inner door liner to hold bottles, condiments, and jars. Replace a cracked or missing bin to restore secure storage and keep items organized and accessible.

• Provides dedicated storage on the door and keeps items contained during opening and closing
• Replaces a cracked, broken, or loose bin
• Common symptoms: bin falls off, won't stay seated, is missing, or is damaged
• Restores original door storage capacity and organization

• Remove all items from the old bin; disconnect power if working near interior lights or controls
• Lift the old bin straight up to release it from the door liner tabs or rails
• Align the new bin with the same location and press down until it seats firmly
• Do not force; if it doesn't seat, install it in the same position as the original

This hex head screw secures panels, brackets, and small components on appliances, restoring proper fit and stability. It's a direct replacement fastener when an original mounting screw is missing, loose, or damaged. What it does:

• Secures panels, brackets, trim, and internal components to prevent rattling or movement
• Replaces stripped, missing, or damaged mounting screws that cause loose parts or misalignment
• Restores reliable mechanical fastening so doors and panels sit flush and operate correctly
• Works as a general-purpose appliance mounting screw when original fasteners are worn

• Always disconnect power to the appliance before starting any repair
• Match the screw to the original location and thread engagement; start by hand to avoid cross-threading
• Use the correct driver or socket for the hex head and tighten until snug—do not overtighten
• If the original hole or threads are damaged, repair or replace the mating hardware before installing the screw

This deli pan assembly provides the sliding drawer used to store deli items and small foods in the refrigerator. It restores secure storage and smooth drawer movement so contents stay organized and accessible. What it does:

• Serves as the deli/drawer bin that holds meats, cheeses, and other small refrigerated items
• Slides on integrated tracks and roller for smooth, stable opening and closing
• Replaces worn or damaged drawer components that cause sticking, sagging, or uneven movement
• Helps keep foods contained and organized inside the refrigerator compartment

• Disconnect power to the appliance before beginning any service to reduce shock risk
• Remove food and support the drawer while detaching the old assembly to avoid dropping
• Align tracks and engage the roller into the slide channels; confirm smooth travel before loading
• If any mounting clips or slides are damaged, replace them to ensure proper fit and operation

The Defrost Heater Assembly is an OEM part for Frigidaire refrigerators. It is responsible for preventing excessive frost buildup on the evaporator coils by heating them during the defrost cycle.

A bad defrost heater assembly can be caused by electrical issues, component failure, or damage. When the defrost heater assembly becomes faulty, it can result in issues such as excessive frost accumulation in the freezer, poor cooling performance, or even a complete defrost system failure.

Symptoms of a bad defrost heater assembly include:

• Excessive frost or ice buildup on the evaporator coils
• Poor cooling in the refrigerator or freezer 
• Water leaking or pooling under the refrigerator
• Refrigerator running continuously 

Replace your faulty defrost heater assembly with this genuine OEM Frigidaire part to restore your refrigerator. This Frigidaire part can also be used on Electrolux, Frigidaire, Gibson, Kelvinator, Westinghouse, and Sears/Kenmore.
 

This housing is the main structural enclosure that supports and protects internal components, restoring proper alignment and safe operation. It replaces a damaged or cracked outer housing to reduce vibration and protect wiring and moving parts. What it does

• Provides structural support and mounting points for internal components.
• Protects internal parts from debris and physical damage.
• Helps reduce vibration and rattling caused by a cracked or broken housing.
• Restores proper alignment to maintain correct component clearances.

• One housing main assembly.

• Disconnect power and, if applicable, gas supply before starting any repair.
• Handle carefully to avoid damaging mounting tabs or paint; some trimming may be required for perfect fit on older units.
• If any fasteners, clips, or gaskets are worn or missing, replace them to ensure a secure installation.

This Ice & Water Module Assembly controls the refrigerator's dispenser and related ice/water functions so the dispenser and ice system respond correctly. It restores control signals between the dispenser controls and the valve/ice circuits. What it does:

• Routes user dispenser commands to the dispenser actuator and water/ice valves.
• Manages dispenser lights and switch inputs for water and ice selection.
• Can stop dispenser response or cause intermittent dispensing when faulty.
• Common symptom: dispenser unresponsive or only one function (ice or water) working.

• One Ice & Water Module Assembly

• Disconnect power to the appliance before beginning any work.
• Handle the module and connectors carefully to avoid bending pins or damaging wiring.
• Installation typically requires access behind the dispenser/control panel; keep screws and trim organized.

This door stop is the replacement part that limits door travel and cushions the refrigerator door for smoother closing and reduced impact. It helps restore proper door alignment and prevents the door from hitting the cabinet. What it does:

• Stops or limits door travel to prevent over-opening and cabinet damage
• Cushions door movement to reduce slamming and wear on hinges
• Helps maintain correct door alignment so the seal engages properly
• Commonly used when the door hangs unevenly, slams, or won't stay aligned

• Disconnect power or unplug the appliance if accessing electrical components is required.
• Support the door or remove it before replacing hinge or stop hardware.
• Basic hand tools usually required; keep track of small screws and clips.
• Test door operation and alignment after installation; adjust as needed.

Replacement drip pan that catches defrost and condensation water beneath the appliance to help keep the cabinet floor dry and reduce the chance of visible leaks or puddling. Simple swap to restore proper water collection. What it does

• Collects defrost and condensation water to channel it away from the cabinet floor.
• Helps prevent water stains and puddles under the appliance.
• Replaces cracked, warped, or missing factory trays that cause leaks or odors.
• Works with the appliance's drainage path to reduce floor-level moisture.

• One replacement tray.

• Disconnect power to the appliance before servicing.
• Remove contents, shelves or access panels as needed to reach the tray.
• Slide or snap the old tray out and position the new tray in the same orientation; secure any clips or fasteners used by the original part.

This genuine replacement screw restores a secure hold for panels, trim, or internal components. It replaces worn or missing fasteners so parts stay aligned and appliances operate safely. What it does:

• Fastens panels, brackets, or trim into place
• Replaces stripped, missing, or damaged screws
• Helps stop rattling, loose panels, or misaligned trim
• Fits OEM mounting locations that require the specified machine screw

• Use the correct driver to avoid stripping the head
• Hand-start the screw, then tighten to firm snug; do not over-torque
• Disconnect power to the appliance before accessing internal components
• If other fasteners are damaged, inspect and replace as needed

This replacement mounting screw fastens panels and components in compatible Frigidaire appliances to restore secure assembly and reduce rattling or loose parts. Simple fastener sized for the original factory location. What it does:

• Secures panels, brackets, or trim to keep parts aligned and stable
• Prevents vibration and noise caused by loose fittings
• Restores proper attachment after repair or disassembly
• Matches the OEM thread and length for a correct fit when specified

• Use the correct screw hole and do not force; cross-threading can damage components
• Tighten to a snug fit—do not overtighten to avoid stripping threads or cracking plastic
• Power tools can be used with care; slow speed and proper bit help prevent slippage
• Turn off power and disconnect the appliance before accessing internal parts

The Frig Freshness Booster Refill is an OEM part for Frigidaire refrigerators. This refill helps maintain freshness by absorbing and removing odors from the refrigerator.

Causes of needing a new refill include the natural depletion of the absorption material over time through repeated use and odor elimination. Refills are intended to be replaced periodically to ensure optimal freshness performance.

Symptoms of a refill needing replacement include:

• Lost ability to fully absorb odors
• Deterioration or break down of the absorption material
• Excessive build up of odors inside the refrigerator

This OEM Frigidaire part is also compatible with Electrolux, Gibson, Kelvinator and some Kenmore models.

This water filter facia is the exterior faceplate that finishes and secures the refrigerator's cartridge-style water filter assembly, restoring a clean appearance and proper filter retention at the dispenser area. What it does:

• Covers and secures the water filter housing, keeping the filter cartridge in place
• Restores a finished look when the original faceplate is cracked, chipped, or discolored
• Helps maintain the correct filter alignment for a proper seal and fit
• Prevents debris from entering the filter compartment and the dispenser area

• One water filter facia/faceplate

• Turn off the refrigerator's water supply before removing or reinstalling the filter or facia
• Remove the filter cartridge per the refrigerator manual to access the facia if required
• Use basic hand tools; avoid forcing clips or tabs to prevent breakage

This rubber grommet cushions and secures appliance components, reducing vibration and wear while helping maintain proper alignment. It's a small replacement part that restores quiet operation and prevents metal-on-metal contact. What it does:

• Cushions or isolates moving parts to reduce noise and vibration
• Provides a snug mount or seal where components pass through panels
• Helps keep trim, panels or wiring from rubbing and wearing
• Commonly replaced when parts become loose, cracked, or noisy

• Disconnect power before attempting any repair.
• Access may require removing a panel or trim piece; use trim tools to avoid damage.
• Ensure the grommet seats fully in the mounting hole and that retained parts align correctly.
• Replace if torn, hardened, or deformed; do not install a damaged grommet.