205C-2981-Pod-112 Parts

Keep your fridge sealing tightly with this replacement door gasket. It restores the refrigerator door seal to help maintain proper cooling, reduce energy use, and limit moisture and frost buildup for consistent food storage. What it does:

• Seals the refrigerator door to prevent cold air leakage and maintain set temperature
• Helps reduce frost buildup and condensation inside the fresh-food compartment
• Lowers strain on the compressor caused by escaping cold air
• Commonly replaced when you notice warm spots, persistent moisture, visible gaps, or a door that won't seat properly

• Disconnect power and remove food from the door area before replacing the gasket
• Inspect the gasket mounting channel for debris or damage and clean before installing
• Avoid sharp tools that could tear the gasket during removal or installation
• After installing, allow the gasket to form and check the door seal; door may need to be closed slowly for final seating

This chainsaw fuel cap assembly is made from high-quality plastic. Durable threads keep this chainsaw fuel cap assembly working for years of use. You place one end in the fuel tank while the screw cap covers the nozzle. This keeps your gas from spilling out and causing possible damage or injury. You can’t cut down a tree or slice up some firewood with gas leaking everywhere. This also leads to harming the environment around you. Chainsaws fuel caps can swell. The rubber seals may leak after a certain amount of use. The cord attaching the cap to the insert may break, allowing the cap to be lost. Replacing the chainsaw fuel cap assembly can correct these problems. Pliers or a wrench may be needed to remove the old fuel cap assembly. This genuine OEM chainsaw fuel cap assembly was manufactured for use with Craftsman chainsaws. It is also compatible with Poulan and Poulan Pro chainsaws.

This genuine Husqvarna screw can be used as a replacement part for chainsaws. The function of a screw for a chainsaw is to attach parts to one another through rotation that pierces through the components. Screws are often subject to replacement in the lifespan of a small engine appliance as they are small components that are easily lost or misplaced without any immediate impact on the appliance; additionally, screws can loosen themselves over time or can suffer damage from general wear and tear or through direct impact upon collision. Screws can also corrode over time, impairing their ability to keep components attached to one another. If this is the case with a screw in a chainsaw, the part should be removed and replaced with this genuine OEM part before using the chainsaw again. Remember to always wear gloves when handling, repairing, and operating outdoor equipment. This is an OEM part sourced directly from the manufacturer. It is sold individually. This screw is compatible with the following brands: Husqvarna, Craftsman, and Poulan.

This mullion assembly is the vertical center trim that attaches between refrigerator doors to improve appearance and help direct the door seal for proper closing. It replaces a damaged, cracked or missing mullion and restores the door interface. What it does

• Covers the gap between French/side-by-side style doors and provides a finished center trim.
• Helps align and protect the door edges where seals meet to maintain a tighter door interface.
• Restores appearance by replacing cracked, broken or discolored mullion trim.
• Can reduce drafts or light entering between doors when the original mullion is damaged.

• One mullion assembly as shown

• Disconnect power to the appliance and remove interior items from the top shelf/door area before starting.
• Installation typically requires removing door trim or screws along the mullion—handle door panels carefully to avoid damage.
• Keep original fasteners; replace only the components shown. If mounting hardware is missing, obtain exact fasteners before installing.

Combustion engines operate because of the chambers that seal in the tiny explosions caused by fuel, air and a spark. The pistons are part of the process of taking power from those explosions, and the piston rings seal the combustion chamber so that all of the gases created remain inside of the engine's crankcase. This replacement piston ring will ensure that a chainsaw's engine can do that, as well as maintaining the right amount of oil between the piston and the cylinder wall. An OEM replacement part, this piston ring works with Craftsman and Husqvarna chainsaws, among others. It will require a wrench set, screwdriver and a pair of pliers to make the replacement. Sold individually.

Size: 10 - 24 x 3/8

A keeper valve is a small piece of hardware used to help to secure a valve. It is designed for use with pieces of outdoor lawn and garden power equipment that have small engines, a lawn mower, a snowblower, and a wood chipper. It is compatible with products by brands such as Briggs & Stratton, Craftsman, Toro, Cub Cadet, Lawn Boy, MTD, and Simplicity.The keeper valve fits into a groove in the end of the valve stem to secure the valve spring, valve spring retaining washer, and valve stem together. It is only natural that, over time, the keeper valve may wear out from regular exposure to the elements, get damaged, fall out, or become lost. In any of these events, a replacement will become necessary.The replacement or repair process of the keeper valve should be straightforward, but the user replacing the part should always be sure to wear gloves during any assembly, replacement, or installation processes. The user should also refer to the owner's manual of their equipment and any guiding diagrams that clarify the placement location. This keeper valve is an original OEM part sourced directly from the manufacturer, Midwest Engine. It is sold individually.

This replacement part is a screw. It is a genuine replacement part made by Husqvarna. This type of part is very common in different types of appliances. Screws hold different parts together.A new screw might be needed if the user notices that different parts are loose or missing. It is possible for screws to become stripped over time and will need to be replaced. The repair for this screw should be fairly simple and will require a screwdriver and perhaps pliers if the previous screw is stuck in place. This is a genuine OEM replacement part. This part is sold individually and is sourced directly from the manufacturer to ensure proper fit and long-lasting use.

This is a genuine OEM lawn and garden equipment screw that is used in various types of machines. It is a tapping screw that may have several applications depending on the exact equipment in question. A hex key screw is responsible for providing a secure hold for various components. It is made of durable metal, but also exposed to high heat and constant vibrations which can lead to wear, damage, or even breaking. The screw should always be replaced with an OEM replacement. This genuine OEM tapping screw is manufactured by Poulan. It is designed to be used in select outdoor power equipment units from the brand. It can also be used in compatible models from Paramount, Weed Eater, Jonsered, and Husqvarna. It fits trimmers, chain saws, and hedge trimmers from these brands. The tapping screw is sold individually and does not include any additional hardware or parts. A Torx screwdriver or hex key will be required to replace this tapping screw. Be sure to wear gloves when performing engine repairs and allow the machine to cool completely before starting work.

This is a piston ring replacement that is used for several types of outdoor tools and equipment. The piston ring is used to create a seal between the piston and the cylinder. The seal formed by the piston ring separates the crankcase and the combustion chamber to ensure there is proper compression in the engine. The piston ring can start to wear down or even break after a substantial amount of use. When there is any type of damage to the ring, owners should have it replaced immediately. Problematic piston rings will mean the seal is broken, which will then result in a loss of compression and performance problems with the engine. This genuine OEM piston ring is compatible with more than 150 different models. The ring is made with a 36 chromium-ceramic coating. It is sold individually and is typically used for chainsaws. It could also be used for some pole pruners and trimmers. Compatible brands include Jonsered, Husqvarna, Poulan, Poulan Pro, and Craftsman.

This chainsaw bar adjuster is a genuine replacement tool that can be used with select models of chainsaws. The purpose of the bar adjuster is to make it easy to adjust the chain bar to tighten the chain. The angular design of this tool makes it easy to tighten and loosen the bar to create the ideal tension in the chain. This bar is made of durable metal but it can still become worn, bent, or otherwise damaged with regular use. A new bar wrench will ensure that the chainsaw can always be adjusted as needed. This genuine OEM bar adjuster is manufactured by Husqvarna. It is designed as an exact replacement for the original tool and it is compatible with Craftsman, Poulan, Snapper, and Husqvarna chainsaws. There are over 150 models that can use this chainsaw bar wrench, which is made of premium durable metal material and sold as an individual unit. Never attempt to adjust a chainsaw bar or blade with anything but the right tool. This genuine part is a replacement for bar adjusters that have been lost, as well, and should be stored carefully out of the elements when not in use.