2155964 Parts

This is a cylinder that is specifically designed for use with snowblowers. The cylinder is a part of the starter assembly and engine. If the cylinder has gone bad or is damaged, it can cause problems with compression. Pull on the starter rope while holding a thumb against the cylinder hole. If no air comes out of the hole, it could be the result of a damaged component, including the cylinder. When this part isn't operating correctly, it can prevent the snowblower from starting at all.If the cylinder has gone bad, it needs to be replaced. The snowblower will need to be disassembled to get access to this component. This will require a basic set of tools and a pair of work gloves. Make sure the snowblower is turned off and the spark plug wire has been disconnected before replacing the part.This cylinder is an authentic OEM replacement part that is directly sourced from the manufacturer. It is sold as an individual component. The cylinder is created to fit snowblowers manufactured by Craftsman, Yard-Man, Cub Cadet, Huskee, Troy-Bilt, MTD, and Yard Machines.

This is a screw used with many kinds of lawn and garden equipment, such as leaf blowers and string trimmers. The screw can be used to attach components together on its own or with the use of a nut. When using a nut with the screw, it should have the same threading and finish as the screw. Wear and tear or breakage can happen with screws over time and will lead to the need to replace them.Corrosion, hot temperature, and stress may all create weakness in a screw. This can cause it to become brittle, loose, or even broken outright. A visual inspection of the screw will give an indication of whether it needs to be replaced with a new one. If a replacement is required, a screwdriver can be used to remove the screw before placing a new one in the same location.This screw can be used with string trimmers, leaf blowers, edgers, hedge trimmers, chainsaws, and pole pruners manufactured by Paramount, Poulan, Poulan Pro, Weed Eater, Husqvarna, and Craftsman. It is sold as an individual part. The screw is a genuine OEM replacement part sourced directly from the manufacturer.

An effective trigger is essential to the life and functionality of any chainsaw. Be sure to check the throttle trigger for smooth operation. If any binding occurs, or if the engine fails to return to idle, the saw will require some maintenance and/or replacement parts before being used again. This trigger replacement part may also be necessary if the trigger can be pulled even when the throttle trigger lockout is depressed.The installation process requires the removal of the handle (by unscrewing it), then the removal of the throttle link. That will clear access to the trigger switch, which can then be unscrewed and replaced. Always wear gloves when working with power tools to ensure safety.This genuine trigger replacement part is designed especially for Poulan chainsaw triggers. It is compatible with over 100 different chainsaw models and fits as a direct replacement, providing OEM fit and function, as well as brand-name durability over the long-term.

Mufflers can easily become worn or break off with regular equipment usage. This part can be used to easily replace an existing muffler. Mufflers are designed to quiet the noise made by the engine. As the equipment ages this part can fail, causing the engine to be extremely loud when operated. This muffler is made from high-quality, durable, non-corrosive materials. This muffler is a genuine OEM replacement part that has been sourced directly from the manufacturer. This muffler is compatible with various different models of Husqvarna and Poulan chainsaws. Please note this part is sold individually.

This starter spring is a genuine OEM replacement part for chainsaws that operate using a starter rope. When an operator pulls the starter rope out, there is a pulley around which the rope then has to recoil. The starter spring maintains tension in the pulley so that the rope will naturally recoil. The starter spring also provides enough tension to prevent the operator from yanking the rope all the way out of the assembly. Through repeated use, and especially if an operator is rough on their appliance, the starter spring can loosen up and will no longer work as effectively. When this happens, the starter pulley will not recoil and the starter rope will hang loose from the appliance. Fortunately, switching out the starter spring is an easy repair that should only require a wrench and a pair of pliers. Be careful when pulling the old spring out. Although it isn't as tense as it once was, it still has the potential to snap back. This replacement starter spring is a high-quality part for Husqvarna, Poulan, and Weed Eater appliances, and as such, it is sourced from its original manufacturer. This part does not ship with any additional hardware.

This chainsaw fuel cap assembly is made from high-quality plastic. Durable threads keep this chainsaw fuel cap assembly working for years of use. You place one end in the fuel tank while the screw cap covers the nozzle. This keeps your gas from spilling out and causing possible damage or injury. You can’t cut down a tree or slice up some firewood with gas leaking everywhere. This also leads to harming the environment around you. Chainsaws fuel caps can swell. The rubber seals may leak after a certain amount of use. The cord attaching the cap to the insert may break, allowing the cap to be lost. Replacing the chainsaw fuel cap assembly can correct these problems. Pliers or a wrench may be needed to remove the old fuel cap assembly. This genuine OEM chainsaw fuel cap assembly was manufactured for use with Craftsman chainsaws. It is also compatible with Poulan and Poulan Pro chainsaws.

This genuine Husqvarna screw can be used as a replacement part for chainsaws. The function of a screw for a chainsaw is to attach parts to one another through rotation that pierces through the components. Screws are often subject to replacement in the lifespan of a small engine appliance as they are small components that are easily lost or misplaced without any immediate impact on the appliance; additionally, screws can loosen themselves over time or can suffer damage from general wear and tear or through direct impact upon collision. Screws can also corrode over time, impairing their ability to keep components attached to one another. If this is the case with a screw in a chainsaw, the part should be removed and replaced with this genuine OEM part before using the chainsaw again. Remember to always wear gloves when handling, repairing, and operating outdoor equipment. This is an OEM part sourced directly from the manufacturer. It is sold individually. This screw is compatible with the following brands: Husqvarna, Craftsman, and Poulan.

Combustion engines operate because of the chambers that seal in the tiny explosions caused by fuel, air and a spark. The pistons are part of the process of taking power from those explosions, and the piston rings seal the combustion chamber so that all of the gases created remain inside of the engine's crankcase. This replacement piston ring will ensure that a chainsaw's engine can do that, as well as maintaining the right amount of oil between the piston and the cylinder wall. An OEM replacement part, this piston ring works with Craftsman and Husqvarna chainsaws, among others. It will require a wrench set, screwdriver and a pair of pliers to make the replacement. Sold individually.

This replacement part is a screw. It is a genuine replacement part made by Husqvarna. This type of part is very common in different types of appliances. Screws hold different parts together.A new screw might be needed if the user notices that different parts are loose or missing. It is possible for screws to become stripped over time and will need to be replaced. The repair for this screw should be fairly simple and will require a screwdriver and perhaps pliers if the previous screw is stuck in place. This is a genuine OEM replacement part. This part is sold individually and is sourced directly from the manufacturer to ensure proper fit and long-lasting use.