21Cub Parts

This shaft wheel pony is a genuine MTD part, sold individually. This shaft wheel pony can be used as a replacement part in a tiller. The purpose of a shaft wheel pony in a tiller is to function as a fully assembled shaft with hardened steel worms which connect the blades of the tiller to the motor of the tiller so that the blades can be rotated and cut through the soil.The shaft wheel pony in a tiller might have to be replaced if the shaft suffers irreparable damage in the form of puncturing, denting, cracking, scraping, eroding, or warping to the point of reduced or no functionality. If this occurs, the shaft wheel pony should be removed and replaced by this genuine OEM replacement part in order to guarantee safe use of the tiller for the operator. This replacement should be facilitated in accordance with the proper set of instructions sourced from a relevant appliance handbook or manual.This is a genuine OEM replacement part sourced directly from the manufacturer. It is sold individually. This shaft wheel pony is compatible with the following outdoor appliance brands: MTD, Craftsman, Cub Cadet, Troy-Bilt, Huskee, Yard Man, and Yard Machines.

A keeper valve is a small piece of hardware used to help to secure a valve. It is designed for use with pieces of outdoor lawn and garden power equipment that have small engines, a lawn mower, a snowblower, and a wood chipper. It is compatible with products by brands such as Briggs & Stratton, Craftsman, Toro, Cub Cadet, Lawn Boy, MTD, and Simplicity.The keeper valve fits into a groove in the end of the valve stem to secure the valve spring, valve spring retaining washer, and valve stem together. It is only natural that, over time, the keeper valve may wear out from regular exposure to the elements, get damaged, fall out, or become lost. In any of these events, a replacement will become necessary.The replacement or repair process of the keeper valve should be straightforward, but the user replacing the part should always be sure to wear gloves during any assembly, replacement, or installation processes. The user should also refer to the owner's manual of their equipment and any guiding diagrams that clarify the placement location. This keeper valve is an original OEM part sourced directly from the manufacturer, Midwest Engine. It is sold individually.

This is a durable metal valve tappet that is designed for use in small motor lawn equipment. It is attached to the push rod. The valve tappet takes the rotating motion from the camshaft and turns it into a linear motion for the valves to operate correctly. In some cases, the valve tappet can become damaged or break and will need to be replaced.If there is an issue with the valve tappet, a set of pliers will be needed to make the replacement. For safety, use work gloves and make sure the spark plug wire is disconnected before starting the replacement. The crankcase breather, muffler, and other components will need to be taken off to gain access to the valve tappet to replace it.This valve tappet is a genuine OEM replacement component directly sourced from the manufacturer. It is sold as an individual replacement part. It is designed to be used on lawnmowers, snowblowers, tillers, pressure washers, leaf blowers, generators, and chipper shredders manufactured by Briggs & Stratton, Toro, Cub Cadet, Lawn-Boy, Snapper, MTD, and Simplicity.

Flange screws have a flange located near the top of the screw, which helps to distribute the connection force over a larger area to reduce potential damage to the machine. It also allows the screws to be used in oversized or irregular holes, and it helps to ensure they stay in place. This flange screw also has a hex top. Screws can last for a long time. However, they may become corroded or worn over time and need to be replaced. They could also become lost and need a replacement. Without all of the screws in the proper places in a machine, it could vibrate too much, which could render it less effective or unsafe to use. The flange screw is a genuine OEM part that can be used with many types of machines including lawn mowers, snowblowers, tillers, pressure washers, leaf blowers, generators, wood chippers, and other small engines. The screws are compatible with Briggs & Stratton, Craftsman, Toro, Cub Cadet, Murray, Lawn-Boy, Snapper, Simplicity, and MTD.

This is a replacement screw to secure the pawl friction plate used in many types of lawn and garden equipment. The part is also sometimes called a flange bolt. It is identical to the original screw that came with the machine and will replace a lost or damaged screw. The screws could become damaged due to corrosion or an incident that causes the screw to bend or break. They also serve as replacements in case the screw was lost. Replacing the screw is a simple repair to make. This is an authentic OEM replacement screw that is sold individually. Some buyers might want to have an extra screw on hand. The replacement screw for the pawl friction plate can be used on lawn mowers, snowblowers, tillers, pressure washers, generators, edgers, log splitters, wood chippers, and other small engines. Compatible brands include Briggs & Stratton, Craftsman, Toro, Cub Cadet, Lawn-Boy, Snapper, MTD, and Simplicity.

This replacement friction spring is a genuine OEM part meant for any number of small appliance engines run using a starter rope. This spring absorbs large amounts of kinetic energy that could damage the starter rope pulley system. It helps keep the pulley from being overstretched, which would create enough pressure to break the entire system. This spring sits at the center of the pulley system and creates resistance as the user yanks the starter rope. Friction springs can become worn out after repeated use, especially if a user tends to yank the starter rope quite forcefully. The most obvious sign of a worn of friction spring is if the pulley system lacks any resistance. As the user pulls the cord, they should feel a little pull back, but if the friction spring is worn, there will be much less resistance. Replacing this part is straightforward and will only require a screwdriver. Simply open the pulley system, carefully remove the old spring, and install the new one. This part is compatible with a wide number of appliances from Toro, Vanguard, Briggs & Stratton, and Lawnboy. It comes sourced from the original manufacturer and ships individually.

The stop switch, sometimes called a kill switch, is triggered to stop the engine when the operator is no longer on the seat ,This is important for safety. If the stop switch is not functioning properly, inspect it for damage and replace it right away. Operating a machine without a functional stop switch can be dangerous. The stop switch is a genuine OEM part, and it is sold individually. The switch can work for many types of equipment including lawn tractors, lawnmowers, log splitters, wood chippers, pressure washers, and tillers. The replacement part is compatible with a range of brands, including Midwest Engine, Toro, Craftsman, Briggs & Stratton, Lawn-Boy, Murray, Snapper, and MTD.

This genuine replacement retainer E-clip is intended for use with lawn mowers, snowblowers, pressure washers, and more. It gets its name from the shape of the letter “E”, and has one side open, allowing it to have a larger retaining area and higher thrust capacity. Depending on the piece of equipment they are installed in, these retaining clips hold bearings, gears, pulleys, and other moving parts which have grooves in them. They are made of heat-treated steel which allows it hold strong through many uses, but it may eventually begin to wear out or break with extended use.This retainer ring E-clip is compatible with several equipment brands which use Briggs and Stratton engines This is a genuine OEM replacement part and is sold individually.

This is a crankcase gasket that is used in lawn and garden equipment. It is responsible for creating an airtight seal between the cylinder assembly and the crankcase. The part is made of durable composite material, but over time it can deteriorate or break. If this happens, the other components will no longer have the appropriate seal and the tool will not work correctly. Replacing the crankcase gasket requires putting the equipment on a stable surface and disconnecting the spark plug wire. The equipment will need to be disassembled before turning the focus to the engine. Disassemble the motor to gain access to the crankcase gasket and any other damaged component inside. The replacement process will require the use of a pair of pliers, a wrench set, and a socket set. Remove the old crankcase gasket and place the new one in the same location. Reassemble all the parts to use the tool in the future.This crankcase gasket is sold as an individual part. It is an authentic OEM replacement part sourced directly from the manufacturer. This part is compatible with lawn mowers, snowblowers, and wood chippers manufactured by Simplicity, Cub Cadet, and Briggs & Stratton.

This gasket-cylinder head is a genuine Midwest Engine part. It is manufactured as a replacement part for small engines used on various types of lawn and garden equipment, primarily made by Briggs and Stratton. This type of gasket helps seal the cylinder head. It is an important part on these machines, and it is normal for this part to crack or become worn over time. It is a relatively simple replacement to make, but it may require disassembly of parts of the engine.This gasket-cylinder head is a genuine OEM part sourced directly from the manufacturer. It is sold individually and made of durable composite materials. It is compatible with many Briggs and Stratton machines, as well as Simplicity machines.

This is a carburetor replacement designed for use on select lawn and garden equipment engines. The carburetor is responsible for taking in the air and fuel and creating the mixture of the two before sending them to the engine. The fuel and air are mixed in the inner chamber, and then passed onto the engine through a series of valves and diaphragms. Over time, the exposure to high heat, constant vibrations, and fuel can cause the various components of the carburetor to wear and need to be replaced. In some cases, it's best to replace the entire module rather than trying to replace individual components. The carburetor replacement is a genuine OEM product manufactured by RYOBI and designed for use in equipment from RYOBI, Bolens, Huskee, MTD, Yard Man, and Yard Machines. The carburetor assembly can be used with select gas-powered edger/trimmer models and blowers. It is sold as a complete assembly and includes one carburetor unit per purchase. Always drain the fuel system and allow the engine to cool completely before doing any work. To replace the carburetor, the rear cover and fuel lines will need to be removed and replaced once the old unit has been taken out and the new one replaced.