247161 Parts

This is a genuine replacement ignition key that is manufactured by MTD for use in select models of outdoor power equipment. The ignition key is a plastic piece that is inserted into the ignition cylinder to start the machine. Turning the plastic key will signal to the engine to fire. This is a durable plastic piece, but it can become damaged or lost over time, which will render the machine unable to start. Replacing it will be necessary in order to operate the unit. This genuine OEM ignition key is manufactured to exact standards. It can be used in snowblowers and snow throwers from MTD, Yard Machines, Troy-Bilt, Cub Cadet, Yard-Man, and Husky. The durable plastic key is sold as an individual unit and does not require any tools for installation. This is a simple replacement that should only take a couple of minutes. In the event that the old key is damaged or stuck in the ignition, it may take more effort. It is important to disconnect the power supply for safety before performing any repairs, as well as to wear gloves for hand protection.

This replacement part is a stud assembly. This is a genuine replacement part made by MTD. This stud assembly is responsible for keeping the muffler in place and secure so that the lawn mower may operate smoothly and according to the user's preferences. A new stud assembly might be needed if the current one is misplaced or damaged. It is not unusual for the studs to become stripped over time and need to be replaced. If the muffler is no longer able to stay in place, it can be due to the studs and should be looked into. Be sure the engine is completely turned off before attempting to replace this part. This stud assembly is sold individually and is sourced directly from the manufacturer. This part is a genuine OEM replacement part to ensure proper fit and long-lasting use.

The fuel drain plug gasket creates a solid, leak-proof seal in the fuel drain. The gasket goes into the connection between the drain and the fuel tank. In the event that this gasket fails, there could be fuel leakage from the equipment that could be costly or even dangerous. Make sure to inspect and replace all gaskets regularly to ensure that the engine is working efficiently. This gasket is made of durable rubber material and is simple to install. drain the fuel to provide access to the drain plug and the fuel line without spilling fuel everywhere. Always wear gloves and make sure to disconnect the spark plug or disable the engine before working on any outdoor power equipment. This OEM replacement fuel drain plug is compatible with several tillers, snowblowers, lawnmowers, tractors, and other outdoor power equipment made by Craftsman, Cub Cadet, Troy-Bilt, Yard Machines, MTD, Huskee, Yard-Man, and MasterCut. Sold individually.

This replacement part is an oil seal. This part is a genuine replacement part made by MTD. Oil seals are commonly found in machines with small engines and are responsible for making sure that oil does not leak from the appliance during or after use. A new oil seal might be needed if the current one is missing or damaged in any way. This can include being cracked, stripped, or dented. Any type of damage may cause oil to leak from the tank which can lead to additional problems within the machine itself. Be sure to wear work gloves during this repair as oil can be difficult to remove from the hands. Refer to the correct owner's manual before replacing this part. This oil seal is a genuine OEM replacement part. This part is also sold individually and is sourced directly from the manufacturer to ensure proper fit and long-lasting use.

This is a valve cover gasket that is used in a number of small gasoline engines for a variety of lawn, landscaping, and outdoor power tools including log splitters, chippers, leaf blowers, power vacuums, tillers, and snow blowers. The valve cover gasket provides a seal between the engine's cylinder head and the camshaft to prevent oil leaks. The gasket also seals the spark plug port. This seal prevents the engine oil from entering the combustion chamber. Over time, these gaskets are subjected to heat extremes and the constant vibration of the small engine that runs at about 3,600 revolutions per minute. It is not uncommon for a valve cover gasket to begin to leak after several years of service. The first sign of this is usually white smoke emitted from the engine's exhaust, which is a sign of oil burning in the fuel mix. Eventually, the engine will lose power, as well. When replacing this part, make sure to use a gasket such as this one, which is a genuine OEM replacement part, manufactured to be identical to the specifications of the original gasket. This gasket is compatible with small engines made by Bolens, Huskee, MTD, Troy-Bilt, Yard Man, and Cub Cadet.

It's best to have spare O-ring gaskets on hand to rebuild a carburetor when the need arises. Use this manufacturer-approved replacement part to complete the process. When outdoor power equipment shuts off just after starting or won't start altogether, there may be a problem with the carburetor. It could be a leak that causes compression problems keeping the machine's engine from starting. Gasoline may drip from the float bowl because of an O-ring that won't seal or seat evenly all around, or one that has become brittle over time. This is a genuine OEM part compatible with specific lawnmowers, snowblowers, wood chippers, log splitters, tillers, and other garden maintenance machines from Craftsman, MTD, Cub Cadet, MasterCut, Troy-Bilt, and Yard Machines. It is sold individually.

This is a genuine OEM carburetor assembly sourced directly from the manufacturer. It is designed for use in pressure washers. The carburetor is responsible for ensuring the proper ratio of gas and air are mixed before the fuel reaches the engine. This mixture is vital in the combustion process. If the carburetor is not working correctly, engine performance can be significantly affected. If the engine is slipping or backfiring, the carburetor should be checked for possible clogs. Fuel leaves behind a sticky residue that can clog the carburetor if it is not maintained regularly. However, if the carburetor is corroded or cracked, it will need to be removed and replaced; these issues cannot be repaired.Replacement requires a screwdriver and basin for the fuel. The carburetor gaskets should also be replaced when doing this repair. As an added safety precaution, remove the spark plug and the fuel line. Empty the fuel before removing the old carburetor. This repair should be done in a well-ventilated area.This is a metal carburetor with a plastic choke; it is sold as an individual unit. Carburetor gaskets are not included with the carburetor and should be purchased separately. This carburetor is specially designed for pressure washers manufactured by Homelite.

This V-belt is designed for use in snowblowers by several major manufacturers. It is used to rotate the blades in the blower and acts as the primary belt for the device. These belts are made of a rubber material, which means they can sometimes stretch out, break, or wear down. If this occurs, the V-belt needs to be replaced to ensure the snowblower continues to work at its best.The more frequently a snowblower is used, the more likely it is that a replacement V-belt will be needed. In some cases, a V-belt can wear out more quickly than expected due to faults like mechanical failures. When the belt is overly worn, it can cause the snowblower to act sluggishly since the belt can slip off of the pulley. If the belt breaks, the snowblower will no longer be able to operate. When replacing the belt, drain the fuel and remove the spark plug for a safe repair.This V-belt is a genuine OEM replacement part that is sourced directly from the manufacturer. It's made for use with snowblowers by Craftsman, Yard-Man, Cub Cadet, Huskee, Troy-Bilt, MTD, and Yard Machines. It is sold as an individual component.

This replacement part is a control assembly and is intended for use in different types of lawn equipment. This is a genuine replacement part made by MTD. This specific control assembly is typically found in snow blowers. This part is situated towards the top of the appliance and assist the user in controlling the snowblower. This part is able to adjust the settings as well as the power during use. A new control assembly might be needed if the current one is damaged or broken in any way. Because this is a heavily used part it is not unusual for the area to become stripped or worn down after years of normal wear and tear. Be sure the appliance is completely powered down before starting to repair or replace this part. Refer to the specific user manual for more details on how to replace this part. This control assembly is sold individually and is sourced directly from the manufacturer. This part is a genuine OEM replacement part.

This replacement bracket secures the refrigerator ice maker assembly so it stays properly positioned for reliable ice production. It restores stable mounting and helps prevent the ice maker from shifting or coming loose. What it does:

• Holds the ice maker assembly in place on the freezer liner or mounting frame
• Keeps the ice maker aligned for proper operation and water fill
• Helps stop vibration or movement that can cause noisy operation or misfeeds
• Useful when the original bracket is bent, broken, or missing

• Disconnect power to the refrigerator and shut off the water supply before starting
• Remove the ice maker to access the bracket mounting screws
• Reuse existing screws if undamaged; tighten to secure but avoid overtightening
• If mounting points or surrounding plastic are damaged, replace or repair before reinstalling