253704134415 Parts

This support beam is the structural rail that supports a refrigerator shelf and its pantry/drawer assembly. Replace a cracked or missing beam to restore level support, prevent sagging, and keep drawers operating smoothly.

• Spans the compartment to support the shelf/pantry frame and distribute weight
• Keeps the shelf level and stable under load
• Helps maintain proper alignment for attached drawers or bins
• Common symptoms: shelf tilts or sags; drawers bind, scrape, or drop
• Visible cracks, broken tabs, or a missing beam

• Disconnect power before servicing
• Remove food items, the shelf/frame, and any drawers or bins supported by the beam
• Release the beam from locking tabs or fasteners and remove the old part
• Seat the new beam fully in the mounting points, then reinstall the shelf and drawers and check for level

This hex head screw secures panels, brackets, and small components on appliances, restoring proper fit and stability. It's a direct replacement fastener when an original mounting screw is missing, loose, or damaged. What it does:

• Secures panels, brackets, trim, and internal components to prevent rattling or movement
• Replaces stripped, missing, or damaged mounting screws that cause loose parts or misalignment
• Restores reliable mechanical fastening so doors and panels sit flush and operate correctly
• Works as a general-purpose appliance mounting screw when original fasteners are worn

• Always disconnect power to the appliance before starting any repair
• Match the screw to the original location and thread engagement; start by hand to avoid cross-threading
• Use the correct driver or socket for the hex head and tighten until snug—do not overtighten
• If the original hole or threads are damaged, repair or replace the mating hardware before installing the screw

This LED interior light assembly provides bright, long-lasting illumination for the refrigerator compartment so you can see contents clearly. Designed to replace a dim, flickering, or non-working interior light. What it does:

• Replaces a failed or flickering refrigerator interior light to restore visibility
• Provides cool-running LED illumination with immediate full brightness
• Fits into the refrigerator light housing and connects to the factory wiring
• Helps you locate items quickly and reduces the need to keep the door open

• One LED light assembly

• Disconnect power to the appliance before installing to avoid shock hazard
• Remove the existing lens/cover and unplug the old light assembly from its connector
• Plug in the new assembly, secure the lens/cover, and restore power to test

This replacement drawer handle restores a secure, easy-to-grip pull for your appliance's lower drawer or storage compartment. It provides a direct fit and returns the proper look and function after a broken or worn handle. What it does

• Replaces a broken, cracked, or missing drawer pull so the drawer opens and closes normally
• Provides a stable grip to reduce slipping when pulling heavy or full drawers
• Restores the appliance's finished appearance at the drawer front
• Commonly used when the original handle shows visible damage or stress fractures

• One replacement drawer handle

• Basic hand tools (screwdriver or nut driver) may be needed; remove drawer or access panel per your model instructions
• Keep fasteners from the original handle; use only the screws/bolts specified for your model
• Disconnect power (if applicable) and follow the appliance manufacturer's safety guidelines before servicing

This door stop is the replacement part that limits door travel and cushions the refrigerator door for smoother closing and reduced impact. It helps restore proper door alignment and prevents the door from hitting the cabinet. What it does:

• Stops or limits door travel to prevent over-opening and cabinet damage
• Cushions door movement to reduce slamming and wear on hinges
• Helps maintain correct door alignment so the seal engages properly
• Commonly used when the door hangs unevenly, slams, or won't stay aligned

• Disconnect power or unplug the appliance if accessing electrical components is required.
• Support the door or remove it before replacing hinge or stop hardware.
• Basic hand tools usually required; keep track of small screws and clips.
• Test door operation and alignment after installation; adjust as needed.

This genuine replacement screw restores a secure hold for panels, trim, or internal components. It replaces worn or missing fasteners so parts stay aligned and appliances operate safely. What it does:

• Fastens panels, brackets, or trim into place
• Replaces stripped, missing, or damaged screws
• Helps stop rattling, loose panels, or misaligned trim
• Fits OEM mounting locations that require the specified machine screw

• Use the correct driver to avoid stripping the head
• Hand-start the screw, then tighten to firm snug; do not over-torque
• Disconnect power to the appliance before accessing internal components
• If other fasteners are damaged, inspect and replace as needed

This Mullion harness routes electrical connections through the refrigerator door mullion so lights, sensors and control/LED assemblies communicate with the main cabinet wiring. It restores reliable power and signal routing in the door center strip. What it does:

• Carries power and signal between the door/mullion components and the main harness
• Restores non-functioning mullion lights, LEDs or control communication caused by a damaged harness
• Prevents intermittent connections from frayed or broken mullion wiring
• Used when visible wire damage or connector failure is found in the mullion area

• One (1) mullion harness as pictured

• Disconnect power to the appliance before starting work to avoid shock or injury
• Remove the mullion/door trim and any gaskets per service instructions to access the harness
• Inspect connectors and wire routing; replace any clips or retainers to prevent pinching

This replacement mounting screw fastens panels and components in compatible Frigidaire appliances to restore secure assembly and reduce rattling or loose parts. Simple fastener sized for the original factory location. What it does:

• Secures panels, brackets, or trim to keep parts aligned and stable
• Prevents vibration and noise caused by loose fittings
• Restores proper attachment after repair or disassembly
• Matches the OEM thread and length for a correct fit when specified

• Use the correct screw hole and do not force; cross-threading can damage components
• Tighten to a snug fit—do not overtighten to avoid stripping threads or cracking plastic
• Power tools can be used with care; slow speed and proper bit help prevent slippage
• Turn off power and disconnect the appliance before accessing internal parts

This membrane switch is the flexible button panel that sits under the appliance control bezel, restoring responsive push-button input and clear button labels for the control console. It's a direct-fit replacement for a worn or damaged keypad surface. What it does

• Registers user button presses and sends input to the appliance control board.
• Replaces cracked, faded, or unresponsive keypad areas that no longer activate functions.
• Helps resolve intermittent or failed button responses when the keypad is the root cause.
• Restores correct tactile feel and button alignment under the front bezel.

• Disconnect power or unplug the appliance before beginning any service.
• Remove the control bezel or console to access the membrane; handle the thin membrane carefully to avoid creases or damage.
• Align the membrane over the control board and seating posts, then reassemble the bezel; ensure any adhesive or locating tabs are correctly positioned.

This interior divider separates and organizes items on a refrigerator shelf or inside a drawer so food stays orderly and doesn't shift during normal use. It restores the original partitioning function of the compartment. What it does:

• Provides a stable partition to separate foods and containers
• Keeps items from sliding together or tipping when the door or drawer is opened
• Replaces cracked, warped or missing dividers that no longer hold position
• Restores intended organization and usable space of the shelf/drawer

• Fits into the shelf or drawer track; no tools generally required for removal or reinstallation
• Inspect surrounding clips or tracks for damage and clean area before installing
• Handle gently to avoid cracking the plastic; align tabs and press until secure

This dispenser wiring harness connects the dispenser controls and components in the refrigerator door, restoring electrical continuity for the dispenser functions and simplifying replacement of a damaged or faulty harness. What it does:

• Carries power and signals between the dispenser switches, valve/solenoid, and indicator lights
• Replaces frayed, pinched, or damaged wiring that can cause intermittent or no dispenser operation
• Addresses symptoms like non-working water/ice dispenser, no dispenser lights, or unresponsive dispenser switches
• Provides factory-style connectors for a direct, plug-and-play replacement

• One dispenser wiring harness

• Disconnect power to the appliance before beginning any work to avoid shock
• Remove the inner door panel or dispenser bezel per your model's service instructions to access the harness
• Match connectors and routing to the original harness; avoid stretching or pinching wires when reinstalling
• Test dispenser functions after installation and reassemble panels securely

This shelf channel is the metal/plastic support that secures and aligns a refrigerator shelf or door bin, helping keep stored items stable and properly positioned. It restores proper shelf fit and prevents sagging or misalignment. What it does:

• Provides a secure mounting track for a refrigerator shelf or door bin
• Supports shelf weight to prevent bowing, shifting, or falling
• Keeps the shelf aligned so items sit level and doors close smoothly
• Helps restore original shelf fit after damage or wear

• One shelf channel mounting piece

• High-level replacement; inspect adjacent clips and fasteners and replace if damaged
• Use proper hand tools; avoid overtightening to prevent cracking
• Disconnect power only if working near electrical components; otherwise power removal is not typically required

This electronic board assembly replaces the appliance's main control board to restore reliable electronic control of functions and cycles. It provides the appliance with the control logic needed for normal operation. What it does:

• Controls electronic functions and cycle timing for the appliance
• Resolves symptoms like no power to controls, unresponsive buttons, erratic cycles, or failure to start
• Interfaces with sensors and user inputs to manage operation
• Replaces a damaged or failed control board to restore proper electronic control

• Disconnect power to the appliance before beginning any repair
• Handle the board carefully and avoid static discharge; use anti-static precautions if available
• Installation typically requires removing panels and unplugging wiring harnesses; note harness locations before disconnecting