2558Kew Parts

Combustion engines operate because of the chambers that seal in the tiny explosions caused by fuel, air and a spark. The pistons are part of the process of taking power from those explosions, and the piston rings seal the combustion chamber so that all of the gases created remain inside of the engine's crankcase. This replacement piston ring will ensure that a chainsaw's engine can do that, as well as maintaining the right amount of oil between the piston and the cylinder wall. An OEM replacement part, this piston ring works with Craftsman and Husqvarna chainsaws, among others. It will require a wrench set, screwdriver and a pair of pliers to make the replacement. Sold individually.

This replacement part is a needle and seat kit. This part is a genuine replacement part made by Midwest Engine. This part is typically used as a part of the carburetor. This kit contains a brass plug with a shaped hole to accommodate the needle that also comes with it. These parts work together so that no fuel can enter the float bowl during use. This keeps the engine running smoothly. A new needle and seat kit might be needed if the current one is not working properly. If the user notices that the carburetor is having issues, it may be due to the needle and seat kit. Be sure the engine is completely turned off before starting this repair. This part is sold individually and is sourced directly from the manufacturer to ensure proper fit. This specific part is a genuine OEM replacement part for long-lasting use.

This replacement part is a screw. It is a genuine replacement part made by Husqvarna. This type of part is very common in different types of appliances. Screws hold different parts together.A new screw might be needed if the user notices that different parts are loose or missing. It is possible for screws to become stripped over time and will need to be replaced. The repair for this screw should be fairly simple and will require a screwdriver and perhaps pliers if the previous screw is stuck in place. This is a genuine OEM replacement part. This part is sold individually and is sourced directly from the manufacturer to ensure proper fit and long-lasting use.

This screw is a genuine Husqvarna part, sold individually. This screw can be used as a replacement part in string trimmers, hedge trimmers, chainsaws, and pole pruners.The screw in a small engine outdoor appliance might need to be replaced if the screw is lost, misplaced, or damaged from general wear and tear with long-term use. If the screw is dented, cracked, pierced, warped, or eroded, it should be removed and replaced by this genuine OEM replacement part. If the screw is lost, it should be replaced as well. Always unplug the appliance before performing any kind of repair or replacement.Sourced directly from the manufacturer, this component is a genuine replacement part that is sold individually. This screw is compatible with the following outdoor appliance brands: Husqvarna, Craftsman, Weed Eater, Poulan, and Poulan Pro.

This is a genuine OEM lawn and garden equipment screw that is used in various types of machines. It is a tapping screw that may have several applications depending on the exact equipment in question. A hex key screw is responsible for providing a secure hold for various components. It is made of durable metal, but also exposed to high heat and constant vibrations which can lead to wear, damage, or even breaking. The screw should always be replaced with an OEM replacement. This genuine OEM tapping screw is manufactured by Poulan. It is designed to be used in select outdoor power equipment units from the brand. It can also be used in compatible models from Paramount, Weed Eater, Jonsered, and Husqvarna. It fits trimmers, chain saws, and hedge trimmers from these brands. The tapping screw is sold individually and does not include any additional hardware or parts. A Torx screwdriver or hex key will be required to replace this tapping screw. Be sure to wear gloves when performing engine repairs and allow the machine to cool completely before starting work.

This is a piston ring replacement that is used for several types of outdoor tools and equipment. The piston ring is used to create a seal between the piston and the cylinder. The seal formed by the piston ring separates the crankcase and the combustion chamber to ensure there is proper compression in the engine. The piston ring can start to wear down or even break after a substantial amount of use. When there is any type of damage to the ring, owners should have it replaced immediately. Problematic piston rings will mean the seal is broken, which will then result in a loss of compression and performance problems with the engine. This genuine OEM piston ring is compatible with more than 150 different models. The ring is made with a 36 chromium-ceramic coating. It is sold individually and is typically used for chainsaws. It could also be used for some pole pruners and trimmers. Compatible brands include Jonsered, Husqvarna, Poulan, Poulan Pro, and Craftsman.

This chainsaw bar adjuster is a genuine replacement tool that can be used with select models of chainsaws. The purpose of the bar adjuster is to make it easy to adjust the chain bar to tighten the chain. The angular design of this tool makes it easy to tighten and loosen the bar to create the ideal tension in the chain. This bar is made of durable metal but it can still become worn, bent, or otherwise damaged with regular use. A new bar wrench will ensure that the chainsaw can always be adjusted as needed. This genuine OEM bar adjuster is manufactured by Husqvarna. It is designed as an exact replacement for the original tool and it is compatible with Craftsman, Poulan, Snapper, and Husqvarna chainsaws. There are over 150 models that can use this chainsaw bar wrench, which is made of premium durable metal material and sold as an individual unit. Never attempt to adjust a chainsaw bar or blade with anything but the right tool. This genuine part is a replacement for bar adjusters that have been lost, as well, and should be stored carefully out of the elements when not in use.

The Poulan assembly bar plate is used in Poulan chainsaws. It sits against the saw's housing and acts as a guard to strengthen the mounting of the bar on the saw. Without a properly functioning bar plate, the plastic that houses the saw will likely be damaged. The bar plate also helps to keep the guide bar lubricated with bar oil, which aids in cutting accuracy. If the bar and chain on the chainsaw are worn through prolonged use, the chain will rub against the bar plate and cause a hole in the metal.The Poulan assembly bar plate is made of durable metal that will last a long time and can be installed with a screwdriver. To install the new bar plate, remove the clutch cover on the chainsaw, and remove the bar and chain assembly. Then replace the bar plate with the new replacement, and put the chainsaw back together. Always make sure to re-tension the chain of the chainsaw after the repair is done.This bar plate is a genuine OEM replacement that is compatible with Poulan assembly chainsaws. It is sold individually.

The chainsaw throttle cable seen here is an authentic replacement part specifically for use with certain models of chainsaws. The throttle cable is the part of the chainsaw that allows the user to control the speed of the engine via the throttle. The throttle will control the amount of fuel-air mixture that enters the engine through the carburetor. The durable cable features a square cap at the end of the throttle jacket. While the chainsaw throttle cable is durable, it can still need to be replaced. If the cable has become worn, corroded, or frayed, there is a chance that it could break. The cable could have stretched over a lot of use, as well. If there are issues with the throttle cable, it should be replaced sooner rather than later. It is a relatively simple repair that will typically require a screwdriver and a wrench. The genuine OEM chainsaw throttle cable is a high-quality component that is sold individually. The cable is compatible with models from Husqvarna, Craftsman, Jonsered, Poulan, and Poulan Pro.

Carburetors mix fuel with air to ensure the engine gets just the right amount of combustion. It works when idling and when in operation, and a chainsaw carburetor requires an adapter. This reduces vibration to the carb and isolates heat to help keep the carburetor cool. This carb adapter kit will connect the carburetor to the cylinder and uses a gasket on either side that can fail and require replacement. Because plastic can be used for a carb adapter, it can crack and lead to failure. This OEM carb adapter kit is meant for Craftsman, Poulan and Husqvarna chainsaws, and will work in many different models. Replacing it will require the use of a wrench set, socket set, pliers, and screwdriver. As noted, gaskets may also be needed, but this part is sold individually and includes only the chainsaw carb adapter.

Known as a starter rope, this part is used to start the engine of the tool and wraps around the recoil pulley. The pulley and return spring spin to begin the firing of the spark plug for the engine to run. The rope can malfunction and create problems or even prevent the engine from starting. The most common cause for replacement is when the rope splits or starts to fray and doesn’t operate as usual. A tangled kit rope can also make the rope hard to pull to start up the engine before doing yard work. Users who experience excess rope or a knot on their kit rope when starting the engine may need to look into replacement. This Husqvarna Kit Rope is a component that attaches to chainsaws, hedge trimmers, string trimmers, and leaf blowers. This is a genuine OEM product directly from the manufacturers and is sold individually. It can be used with many models from Husqvarna, RedMax, Craftsman, McCulloch, Poulan, Weed Eater, Paramount, and Homelite. Installation requires only a pair of pliers, a screwdriver, and a Torx screwdriver. Other products that may be needed include a pulley and starter spring.

This replacement part is a washer. This is a genuine replacement part made by MTD. This part is small but important in many different types of machinery and appliances. Washers work together with other small parts like screws to help keep pieces attached securely and safely. A new washer might be needed if the current one is missing or damaged. It is possible that over time washers can become worn down due to friction coming from the parts around them. If this is the case, it is recommended that it be replaced. Be sure to purchase the correct amount of washers as many appliances require more than one to operate effectively. This part is sold individually and is sourced directly from the manufacturer. This part is a genuine OEM replacement part to ensure proper fit and long-lasting use.

This is a genuine adjustment lever assembly that is made for use in select models of edgers. The adjustment lever assembly is a durable metal part that is designed to help adjust the height of the unit. This part is used frequently and it can be subject to damage from repetitive motion or other impacts. It could also become dented or otherwise broken, necessitating a repair or replacement. Typically, this OEM adjustment lever assembly is going to resolve the issue by offering an exact replacement. It is compatible with machines from MTD, Troy-Bilt, Yard Man, and Cub Cadet and will have different applications depending on the appliance in question. Owners should refer to the parts diagram for exact placement when replacing this lever assembly. This part will require a screwdriver and a wrench set to replace. It will be important to disconnect the power and wear gloves in order to perform this repair. Always allow the unit to cool before performing any work, as well. This assembly is sold individually and does not include hardware or additional components.