2702V Parts

This muffler stud is an OEM part directly sourced from the manufacturer. The muffler stud connects the muffler to the body of the machine. Over time, stress and tension can cause these muffler studs to become loose or even fall out and become lost. Rust and corrosion due to rain and snow can also cause the muffler studs to become loose. When this happens, the studs should be replaced immediately to prevent the muffler from becoming loose or possibly coming off. If the studs are loose and the connection to the machine's engine is not secure, the machine's noise may become louder, or it could emit smoke.If the studs are loose or broken, make sure the engine has cooled down before installing new studs. Use a wrench to tighten loose muffler studs. If the studs are missing, install new ones and tighten them with the wrench. While installing the new studs, it is good to inspect the muffler for holes or damage that may reduce the performance. These muffler studs are made of high-quality steel and are sold individually. These are made to be compatible with tillers and other small engines manufactured by Cub Cadet, MTD, and Yard Machines.

This is a genuine OEM clamp sourced directly from the manufacturer. It is used in various lawn and garden machines to connect hoses to fittings. It is used to connect piping to water pumps, exhaust pipes to exhaust manifolds, and other similar applications. This connection prevents fluids or air from leaking from the hose. Clamps may be spring or screw/band clamps. Spring clamps require no tools to install and remove; however, the size must be more accurate than when using screw/band clamps. Screw/band clamps are adjustable and can be tightened or loosened. Screw clamps should be inspected periodically to ensure tightness and that the clamps have not rusted.Hose clamps are installed approximately 1/4 inch below the end of the hose. If two clamps are used, there should be 1/4 inch between the two bands. When using a screw clamp, loosen the screw with a screwdriver just enough to fit the clamp over the hose. If using a spring clamp, squeeze the clamp and hold it open. Slide the clamp over the hose and then attach the hose and clamp to the fitting. Slide the clamp into place at the joint and tighten. Do not overtighten. This brass-colored clamp is a spring clamp made of metal; it is sold as an individual unit. This clamp is compatible with many different types of pipes made by various manufacturers.

This exhaust piping is a genuine OEM replacement part sourced directly from the manufacturer; it is used on tiller engines and other small engines. The exhaust piping is part of the muffler system. It connects to the exhaust manifold. As gas is combusted to run the engine, it is forced out through the exhaust manifold and the exhaust piping. This process heats the pipes for a short period. Over a period of time, this repeated heating can cause the exhaust piping to deteriorate. If this happens, the piping will need to be replaced in order for the exhaust manifold to function correctly. If the engine is experiencing overheating problems, the exhaust pipes will need to be replaced when it is fixed. Overheating will cause them to deteriorate much faster than normal.Allow the engine and exhaust manifold to cool before replacing the exhaust piping. Remove the exhaust pipes from the exhaust manifold. Inspect the manifold for visible signs of damage while the pipes are off. This would be a good time to replace the exhaust manifold gasket. Install the new pipes. The exhaust piping is made of durable black plastic and sold as an individual unit. It is compatible with tillers, chipper shredders, snowblowers, and other small engines manufactured by Cub Cadet, MTD, Troy-Bilt, and Yard Machines.

This replacement part is a runner. This is a genuine replacement part made by Husqvarna. This part works together with the lawnmower deck and is able to connect certain parts together. This is helpful over time when certain parts of the deck become loose. A new runner might be needed if the current one is visibly missing or damaged. This can include being dented, cracked, bent, or chipped. Due to normal wear and tear, this part must be replaced after normal use. Be sure to wear work gloves during this repair as this part is typically next to other parts that can cause injury. Refer to the owner's manual before attempting this repair. This part is sold individually and is sourced directly from the manufacturer. This part is also a genuine OEM replacement part to ensure proper fit.

This shifter rod is a genuine Husqvarna part, sold individually. This shifter rod can be used as a replacement part in a lawn mower. The purpose of a shifter rod in a lawn mower is to affix to the shift lever so that the operator can alter the directionality and regulate the speed of the lawn mower while in use.The shifter rod in a lawn mower might need to be replaced if it can no longer allow the operator to regulate the speed and direction of the lawn mower. This could occur if the shifter rod has been cracked, dented, punctured, scraped, chipped, warped, or eroded to the point of reduced or no functionality. If this occurs, the shifter rod should be removed and replaced by this genuine OEM replacement part. Remember to always wear gloves when handling, repairing, and operating outdoor equipment.This is a genuine OEM replacement part sourced directly from the manufacturer. It is sold individually. This shifter rod is compatible with the following outdoor appliance brands: Husqvarna, Craftsman, Weed Eater, and Poulan.

This replacement part is an idler arm. This is a genuine replacement part made by Husqvarna. This part is usually responsible for providing support to the steering mechanisms by ensuring the machine is able to pivot properly during use. A new idler arm might be needed if the machine is no longer making smooth turns when it is in motion. This can be from a damaged or worn down part causing it to malfunction. If the user hears unusual noises coming from inside the machine, it might be time to replace the idler arm. Be sure the engine is powered off before attempting to complete this repair.This is a genuine OEM replacement part. This part is sold individually and is sourced directly from the manufacturer.

This replacement part is an idler arm. This is a genuine replacement part made by Husqvarna. This part is able to provide the proper pivoting mechanisms to support the user as they steer the machine in the desired direction. A new idler arm might be needed if the machine can no longer make smooth turns when it is in motion. This can be from a damaged or worn down part from years of wear and tear. If the user hears unusual noises coming from inside the machine, it might be time to replace the idler arm. Be sure the engine is powered off before attempting to complete this repair. This is a genuine OEM replacement part. This part is sold individually and is sourced directly from the manufacturer.