2702V Parts

This part is a replacement brake return spring. This is a genuine OEM part made by Husqvarna and has been sourced directly from the manufacturer. This part can be used to replace a broken or defective brake return spring return in a variety of lawn tractor models.The brake return spring allows the brake itself to release. This part attaches to the brake lever and is essential for the safe use of the lawn tractor. Springs such as this one will need to be replaced when stretched, snapped, corroded, or no longer effective. When working on or near an engine, it's important to ensure that the equipment is powered off and completely cool before beginning any repairs. For more accurate information on how and where to install this brake return spring, the appropriate owner's manual and equipment diagrams should be utilized.As an authentic replacement part, this brake return spring is suitable for use on lawn tractors manufactured by Husqvarna, Poulan, and other brands. Please note that this is a genuine part made of high-quality, durable metal and is sold individually.

This steering bushing kit is a genuine Husqvarna part, sold individually. This steering bushing kit can be used as a replacement part in a lawn mower. The purpose of the steering bushing kit is to bolster the placement of the steering wheel shaft, which is affixed to the steering boot; the steering bushing also tamps down excessive vibration from the appliance while the operator holds onto the steering wheel. If the steering bushing has been damaged in the form of puncturing, ripping, tearing, denting, cracking, or warping to the point that it cannot function, the steering bushing kit should be ordered as a genuine OEM replacement part according to the instructions in the proper manual.This component is a genuine OEM replacement part sourced directly from the manufacturer. It is sold individually. This steering bushing kit is compatible with the following outdoor appliance brands: Husqvarna, Craftsman, Poulan, and Jonsered.

This is a lawn tractor spindle assembly that can be used as a replacement part for many models. The spindle will connect the front wheel to the front axle. In this case, this is for the right-hand side of the tractor. If there is a problem with the spindle, the owners might notice that the wheels have trouble rolling and moving forward, or that they feel unwhen using the tractor.The spindle is made from durable metal that is made to last. However, there could be issues that cause breaks because of stress fractures. They could corrode or they could bend during an accident with the tractor. Regardless of the problem, the owners will want to make sure they replace them as soon as possible to ensure proper movement of their tractor.The lawn tractor spindle assembly is used with select lawn tractor models from Poulan, Husqvarna, Weed Eater, and Jonsered. The right-hand assembly is sold individually. This piece is a genuine OEM replacement part sourced from the manufacturer.

This idler pulley is a genuine replacement part for select riding lawn tractors. The idler pulley mounts to the mower deck and is attached to the mower belt. When the engine is engaged and the mower is driving, the pulley is responsible for guiding the path of the belt. This pulley is subjected to repetitive motion, constant vibrations, and other damage and can become worn or broken over time. Replacing the pulley will ensure proper operation and guidance of the belt. This OEM part can provide a solution for compatible tractors. This genuine idler pulley replacement is designed for use with mowers from brands like Husqvarna, RYOBI, Poulan, Jonsered, and Weed Eater. This idler pulley is made of durable metal and sold as a single unit. No other hardware is included with the purchase. Always disengage the spark plug and wear gloves when working on belts or under the mower deck, such as in the case of replacing this pulley.

This replacement part is a compression spring and is intended for use in different types of lawn equipment. This is a genuine replacement part made by Husqvarna. Compression springs are very important in many different types of appliances. Springs use forces to allow the engine and other parts to operate smoothly during use.A new compression spring might be needed if the current one is missing or damaged in any way. This can include being bent or cracked. Due to the nature of their use, compression springs can become stripped over time and should be replaced when this happens. It is not unusual for springs to snap under pressure from overuse. It is recommended to refer to the user's manual before replacing this part. This is a genuine OEM replacement part to ensure proper fit and long-lasting use. This compression spring is sold individually and is sourced directly from the manufacturer.

This is an exhaust gasket designed to fit between the engine exhaust and the exhaust system. It’s designed for use on lawn tractors and is the OEM part for many tractors in the Briggs & Stratton family of brands. When properly installed, it will prevent exhaust leakage. It will also flex enough to allow for parts expanding due to heat. The main symptom of a failed gasket is exhaust leaking from the joint. Gaskets can fail due to a variety of factors. They can dry out, lose flexibility, and crack. They can chafe, losing their heat resistance and drying out prematurely. They can even tear due to excessive engine vibration. In this case, it’s advisable to check your engine mounts to make sure they’re fully secure and tightened. To replace the exhaust gasket, with the engine off, remove the two screws that run through the old gasket. Remove the old gasket and insert the new gasket carefully into place. Screw the exhaust system back together to complete the repair. This is an OEM part sourced directly from the manufacturer and is sold individually.

This hex screw is a genuine MTD part, sold individually. This hex screw can be used as a replacement part in lawn mowers, snowblowers, tillers, leaf blowers, and wood chippers. The purpose of a screw for one of these outdoor appliances is to serve as a fastening component.This hex screw might have to be ordered as a complete replacement in a hex screw that has been lost, misplaced, or stripped as a result of general wear and tear over long-term use or due to an accidental collision with a hard object. If this occurs, the screw should be removed and replaced by this genuine OEM replacement part.This is a genuine OEM replacement part sourced directly from the manufacturer. It is sold individually. This hex screw is compatible with the following outdoor appliance brands: MTD, Craftsman, Cub Cadet, Troy-Bilt, Murray, Yard Machines, Huskee, Yard Man, and MasterCut.

This is a genuine OEM replacement fuel bowl bolt for a snowblower, tiller, or chipper engine. The fuel bowl is a part of the fuel filtration system designed to prevent sediment from clogging up the carburetor. Fuel moves from the fuel tank and passes through the fuel bowl to catch any debris. It is essentially a particle filter. This bolt mounts the fuel bowl in place. The two most likely reasons why a fuel bowl bolt might need replacing are general wear and tear or loss. This bolt is located fairly close to the outside of the engine, making it more susceptible to the elements. Over time, the bolt may corrode and will need replacing. If lost while making a repair to the fuel bowl itself, the fuel bowl bolt will need to be replaced. Use a wrench to make the repair. This fuel bowl bolt is a top of the line replacement part for Bolens, Yard Machines, MTD, Troy-Bilt, Huskee, and Yard Man appliances. This part does not include any additional hardware, as it ships individually.

This replacement part is a washer. This part is able to work with other small parts to ensure that each part is held securely in place during use.If the washer has been stripped due to normal wear and tear, it might be time to replace this part. If the washer has become dented, bent, or cracked, it might not work as effectively as during prior uses. Work gloves are recommended when working with small parts like these. This is a genuine replacement part made by Husqvarna. It is an OEM replacement part which will ensure a proper fit. This part is sold individually.

This replacement part is a carburetor assembly intended for use in different lawn equipment. This is a genuine replacement part made by MTD. This part supplies the engine with an air and fuel mixture at ignition. Then the carburetor is able to regulate the air flow so that the appliance is able to run smoothly and continuously. A new carburetor assembly might be needed if the generator is unable to start or stops while in use. It is not unusual for this part to require replacement after years of normal use. Be sure the appliance is completely powered down and cooled off before attempting to replace this part. This is an OEM part sourced directly from the manufacturer. It is sold individually. This replacement part is compatible with different types of lawn equipment made by MTD.

This is a small engine spark plug positioned in the engine cylinder head. It supplies the spark that will ignite the air-fuel mixture to enable an engine to produce power. This particular spark plug is designed with superior corrosion resistance and dependable performance. Small but mighty, this component allows for increased conductivity and heat control. If the spark plug is damaged or in poor condition, many problems may arise in equipment, including sudden stop while running, overheating, and excessive gas consumption. Replace the spark plug by disconnecting the spark plug wire first, then use a socket driver or wrench to remove the spark plug. Install the new spark plug by turning it by hand initially to avoid cross-threading. If it doesn't twist anymore, use a deep socket wrench or socket driver to tighten the plug until snug. The spark plug can also be used to tune up outdoor power equipment or improve a small engine. This part is recommended to be replaced once per season. This part works with lawn mowers, snowblowers, tillers, leaf blowers, log splitters, wood chippers, and others with small engines. It is compatible with brands such as Craftsman, Cub Cadet, Troy-Bilt, Murray, Yard Machines, MTD, Huskee, Bolens, Yard-Man, and MasterCut. This is a genuine OEM part directly from the manufacturer and is sold individually.