28Cf Parts

This is a replacement float valve, sometimes called a float valve needle. The purpose of the float valve is to stop excess fuel at the float bowl of the carburetor. When there is no gas, the float valve will move downward, which will allow the gas to move into the bowl until it reaches a specific height. Sometimes, problems can occur with the float valve. It might not be fitted properly, it could have corroded, or it may have broken. If there is fuel left in the carburetor for extended periods, it can cause the engine not to start properly. This genuine OEM replacement part is used in a range of different types of small engines, such as those in snowblowers, lawn mowers, and wood chippers. This OEM float valve is compatible with brands like Craftsman, Briggs & Stratton, Toro, Cub Cadet, Lawn-Boy, Wheel Horse, and Simplicity.

This gasket-rocker cover, also called a valve cover gasket, is used in small engines to create an air-tight seal between the engine and the valve cover. This cover is also made to prevent oil from leaking as it travels throughout the engine. It’s an important component to ensure the cylinder head is protected from the elements and oil doesn’t leave the motor. If this component has failed, replacement is essential to avoid engine failure. Gasket-rocker covers are protected on the bottom and top, but they may experience damage from the sides. Over time, the gasket can crack after becoming brittle, which allows dirt, heat, and debris exposure. This can lead to the cover breaking down and leaking, which may cause reduced engine performance and cosmetic problems. Some signs that replacement is needed include a burning oil smell, a dirty cover, and an engine that runs low on oil. This gasket-rocker cover is a genuine OEM component that is directly from the manufacturer. It’s designed for use with Briggs & Stratton and Toro lawn tractors and small engines. It’s sold individually and can be attached using a torque wrench or a socket set.

This is a genuine replacement cylinder head gasket designed for use on select engines from Briggs & Stratton. This gasket is located on the cylinder head. It helps seal the engine and absorbs fuel leaking and preventing damage to other engine parts. Over time, it can shrink or become saturated due to constant exposure to high heat, vibrations, fuel, and pressure. A bad cylinder head gasket can affect engine performance and impact a variety of other systems or even keep the engine from operating at all until it is replaced. This OEM part can provide an exact fit for compatible models.This genuine cylinder head gasket is a replacement that can be used on engines found in tractors made by Toro and Briggs and Stratton. This is a cardboard composite gasket and will require a screwdriver to replace. This part is sold as a single unit. Engines should be completely cool before beginning repairs and users should always wear gloves to protect their hands.

This float bowl gasket is a replacement part for use with lawn and garden equipment, as well as other small engines. The section of the carburetor that is shaped like a bowl where the fuel reserve is maintained is regulated by a float. The float bowl gasket helps to ensure that there are no leaks in this area. The float bowl gasket may start to wear down in time, and it will need to be replaced to prevent fuel leaks. If there are leaks present, it could be due to an issue with this gasket, so it should be checked and replaced if needed. When replacing the gasket, it is important that the surfaces are clean and dry. It is also important that no solvents or gasket sealers are used with this gasket. The genuine OEM float bowl gasket is sold individually and will work to replace the gaskets in lawn tractors, lawn mowers, and other small engines. The compatible brands include Craftsman, Toro, Wheel Horse, Lawn-Boy, Simplicity, and Briggs & Stratton.

This durable plastic ratchet pawl is used on select engines that feature what is known as a Susa starter. In this configuration, the ratchet pawl will be responsible for engaging the recoil starting system. Then, the starting system will allow the engine to fire. Over time, the pawl can become worn or damaged due to regular use. If this happens, the recoil can slip and cause difficulties with starting the engine. If the engine isn’t starting or you can hear it slipping when you try to fire it up, a replacement ratchet pawl could be needed. Be sure to allow the engine to cool before replacing any parts or doing any work and always wear gloves. This replacement is a genuine OEM part that includes two ratchet pawls for various Briggs & Stratton engines on small lawn equipment. This part offers compatibility with over 150 engines from Briggs & Stratton, Toro, Lawn-Boy, and Vanguard by Briggs & Stratton.

This replacement part is a starter pulley. This is a genuine replacement part made by Midwest Engine. Starter pulleys are common in different types of machinery that operate using different parts. Pulleys are able to connect different parts together and allow them to move during use so that the engine runs smoothly. A new starter pulley might be needed if the current one is no longer working as normal. This can include being damaged or stripped down over time. Due to the friction that pulleys frequently experience, becoming worn down is common and this part should be replaced when this happens. Be sure to wear work gloves as needed during this repair as to not get injured. This starter pulley is a genuine OEM replacement part to ensure proper fit. This part is sold individually and is sourced directly from the manufacturer.

This oil seal is a genuine OEM replacement part designed for use on a wide variety of small gas-powered appliance engines. Although small, an oil seal is an important part of the oil cylinder assembly as it prevents oil from leaking into other parts of the engine. If oil begins to leak into the engine, it can corrode other parts or even pose a fire hazard. Therefore, it's important that the oil cylinder is tightly sealed to prevent any damage to the engine. Seals can wear out over time, especially if exposed to heat. Heat will cause the seal to shrink, effectively unsealing the oil cylinder. Before making this repair, be sure to drain the oil cylinder of any oil and be prepared for an involved replacement process. This part is compatible with Toro, Murray, and Briggs & Stratton appliances and is sourced from the original manufacturer. It ship individually of other hardware.

This is an inline fuel filter and is an essential part of a fuel system. This part can be found inside the fuel tank or fitted into the fuel line. The fuel filter is responsible for straining particles like water and debris in the fuel so that they won't reach and clog the combustion chamber and eventually reduce the engine's performance. Annoying sputters when starting equipment and uneven idling are incidents that may be related to a clogged fuel filter. To remove a fuel filter, first cut off the fuel supply and then slide the fuel clamps away to remove the filter. Remember to work in a well-ventilated area, with no open flame or fire source, when installing this component. This part works with lawn mowers, snowblowers, tillers, generators, wood chippers, and others with small engines. It is compatible with brands such as Briggs & Stratton, Craftsman, Toro, Cub Cadet, Murray, Lawn Boy, Snapper, and Simplicity. This is a manufacturer-supplied OEM replacement part and comes as an individual component.

When a starter rope is pulled, it will uncoil and provide tension to the spring and then engage the starter clutch, which turns the crankshaft to crank the engine. The starter clutch could have problems due to natural wear. It could also be damaged due to an incident with the machine. Corrosion could also be a factor since it is made from metal. When there are issues with the starter clutch, it will be difficult to get the engine started. The best course of action is for the operator to replace the clutch. This is a genuine OEM replacement starter clutch that is sold individually. The part can be used for many types of equipment including lawn mowers, snowblowers, tillers, pressure washers, leaf blowers, edgers, wood chippers, generators, and other small engines. Compatible brands include Craftsman, Toro, Cub Cadet, Lawn-Boy Simplicity, MTD, Murray, and Briggs & Stratton. Operators should ensure they are getting the correct starter clutch as a replacement.

This rewind spring, also known as the recoil spring, is an essential part in a small engine. Its job is to rewind the pull rope back into the starter housing and, should there be difficulty in retraction, it is often because the rewind spring has failed. This OEM replacement part works in the engines and starter systems of tillers, pressure washers, lawn mowers, snowblowers, leaf blowers, generators, edgers, and wood chippers. It is suited to brands like Toro, Cub Cadet, Briggs & Stratton, Lawn Boy, MTD, and others. The primary component is the spring, which is found inside of a metal housing. This part ships individually, and should the housing need to be replaced, it is a separate purchase.

This gasket set is a genuine Midwest Engine part, sold individually. This gasket set can be used as a replacement part in a lawn mower or a snowblower. This gasket set comes with a variety of gaskets in various shapes and sizes, perfect for fitting into many internal mechanisms within the lawn mower or snowblower.If the gaskets have been cracked, punctured, torn, dented, cracked, eroded, or warped beyond functionality, this gasket set should be ordered as a genuine OEM replacement part.This is a genuine OEM replacement part sourced directly from the manufacturer. It is sold individually. This gasket set is compatible with the following outdoor appliance brands: Midwest Engine, Briggs & Stratton, Toro, Cub Cadet, Wheel Horse, Lawn Boy, and Simplicity.

This float bowl is a part associated with the carburetor of a small engine for lawn and garden equipment like lawn tractors. The component is mounted on the side of the carburetor and is a small fuel tank fed by the regular fuel tank. It floats in the fuel, and as the level drops, the float also drops to allow more fuel into the chamber. When it fills, the float bowl moves up and closes the float needle so fuel isn’t released. Some signs that a float bowl may not be working correctly include an engine stalling at high speeds, an engine that keeps flooding, or fuel that is too lean or too rich. Replacement requires turning off the flow of fuel, removing the drain plug, and placing a screwdriver against the pin holding the hinges of the float. This float bowl is a genuine OEM product directly from the manufacturer and comes as an individual item. It is designed for use with Briggs & Stratton, Simplicity, and Cub Cadet lawnmowers and lawn tractors. The float bowl comes with a screw, a washer, and an O-ring and requires basic tools to install.

This is an exhaust gasket designed to fit between the engine exhaust and the exhaust system. It’s designed for use on lawn tractors and is the OEM part for many tractors in the Briggs & Stratton family of brands. When properly installed, it will prevent exhaust leakage. It will also flex enough to allow for parts expanding due to heat. The main symptom of a failed gasket is exhaust leaking from the joint. Gaskets can fail due to a variety of factors. They can dry out, lose flexibility, and crack. They can chafe, losing their heat resistance and drying out prematurely. They can even tear due to excessive engine vibration. In this case, it’s advisable to check your engine mounts to make sure they’re fully secure and tightened. To replace the exhaust gasket, with the engine off, remove the two screws that run through the old gasket. Remove the old gasket and insert the new gasket carefully into place. Screw the exhaust system back together to complete the repair. This is an OEM part sourced directly from the manufacturer and is sold individually.

The washer seal is an essential part of the carburetor float bowl on engines with carburetors on lawn mowers. This washer prevents gasoline leaks from the carburetor by sealing the bolt to the bowl.The washer seal is normally replaced when overhauling the carburetor. Reusing the old one is not recommended. If the seal between the bolt and the bowl is not tight, gasoline could leak and cause damage to the engine or cause bodily injury due to combustion. There are normally two bolts on the carburetor bowl. Each bolt will have a washer seal. It is a good idea to replace both seals at the same time to ensure both are flush with the bowl.When replacing the washer seal, it has to be flush and tight but not overtightened. If it is overtightened, it can crack and strip, making it leak and useless. If necessary, the washer can be trimmed to make a tighter fit. After making sure the fit is flush, it slides over the bolts that make the connection from the bolt to the bowl. The bolts are then tightened.This OEM Midwest Engine washer seal is sold individually for Briggs and Stratton lawn mower and lawn tractor engines.

This fuel filter is a genuine Midwest Engine part, sold individually. A fuel filter can be used as a replacement part for outdoor appliances including lawn mowers, snowblowers, generators, and wood chippers. This genuine OEM part is made out of durable, high quality materials.If the engine won't start, it is possible that the fuel filter has been clogged and is not allowing the flow of fuel into the carburetor, where it is mixed with air in order to ignite the spark plugs and power on the engine.This OEM part is a genuine replacement that is sold individually and sourced directly from the manufacturer. This fuel filter is compatible with the following outdoor appliance brands: Midwest Engine, Briggs & Stratton, Craftsman, Toro, Cub Cadet, Murray, Tecumseh, Snapper, MTD, and Simplicity.

This is a genuine float needle valve that is designed to be used in select small engines found in lawn tractors. The float needle is located in the carburetor and is responsible for assisting with the intake and outflow of gas through the assembly. As the fuel bowl in the carburetor fills and drains, this needle regulates how much fuel is present to ensure the proper operation of the engine. Over time, the valve can become cracked or get damaged because of repetitive motion and exposure to high heat. This could impact the flow of fuel and the engine performance, or cause the engine to fail completely. This genuine OEM float needle valve is manufactured to exact standards as an identical replacement for select Briggs & Stratton small engines found in lawn tractors. It can also be used with certain models from Toro and Vanguard. It is sold as an individual unit and made of durable plastic. Be sure to drain the fuel from the engine and allow it to cool before doing any repairs. Gloves are also recommended for safety. For those who need additional components, this valve may also be available as part of a compatible carburetor rebuild kit.