316433604 Parts

A carriage bolt is a type of fastener. It features a smooth rounded head and a square domed top. It has threading, which leads to up to the square shoulder. The purpose of its square is to prevent the bolt from spinning. Once the carriage bolt is inserted through the hole, using a nut and washer can provide additional security. Carriage bolts can corrode and loosen over time. Since it doesn't have a slotted head, a socket wrench is needed when replacing. This bolt carriage replacement is compatible with wood chippers, tillers, string trimmers, lawnmowers, and edgers. It is a genuine MTD product that measures 5/16x.075. It has a smooth rounded head and square shoulder underneath it. This carriage bolt is sold individually.

Washers are used in various locations on many types of lawn and garden equipment and can help to keep a bolt or screw in place. The washer will also help to spread the load from connection, which can help to reduce the risk of damage. One of the most common reasons to replace a washer is if the current washer is lost. If the washer is corroded or if it has been bent or otherwise damaged, it should be replaced, as well. Replacing a washer is generally easy, but this can depend on the location of the washer that needs to be replaced. The authentic OEM replacement flat washer is sold individually. Having several of these available for future needs is a good idea. The washer can be used on snowblowers, lawn mowers, tillers, edgers, log splitters, chainsaws, and wood chippers. Compatible brands include Craftsman, Cub Cadet, Ryobi, Troy-Bilt, Husky, Murray, Yard Machines, MTD, Huskee, Montgomery Wards, Bolens, Yard-Man, Turf King, and MasterCut.

This part is a replacement bar adjuster screw. This is a genuine OEM part made by MTD and has been sourced directly from the manufacturer. This part's intended use is to replace a broken, stripped, or defective bar adjuster screw in chainsaws.The bar adjuster screw enables the user to easily adjust the tension of the bar. This ensures that the chain is held tightly and securely in place. If this part is broken, lost, or faulty, the chainsaw may not work to the best of its ability. When working on or near an engine, it's important to make sure the equipment is powered off and completely cooled down before starting any repairs. For more accurate information on how and where to install this bar adjuster screw, reference the appropriate owner's manual and specific equipment diagrams.This is an authentic OEM replacement part made of high-quality metal. This bar adjuster screw can be used with different models of chainsaws that have been manufactured by MTD, Craftsman, and other brands. Part sold individually.

This replacement part is a hex screw. This part is small but important in many different kinds of machinery. Screws secure components within the equipment.Over time, screws can become stripped or corroded, causing them to break or get stuck in place. Excessive vibration during the use could also eventually lead to a screw coming loose and being lost.This is a genuine OEM replacement part manufactured by MTD. This part is sold individually.

This e-ring clip is a fastener made of semi-flexible metal in a ring shape with open ends so it can easily be snapped into place. These items are sized in a way to offer an interference fit into or onto a land or groove when in use. Installing or removing an e-ring clip requires them to be elastically deformed. These clips can become worn from use or damaged due to heavy loads or the presence of corrosive substances.If an e-ring clip is malfunctioning, it should be replaced. This can be done with an e-clip remover, a pair of pliers, or a flathead screwdriver. E-rings are designed to snap into a groove cut into a round shaft. To install a new clip, place the open ends against the shaft and apply pressure. This is best done using needle nose pliers rather than fingers. Once the new e-ring clip is installed, the chainsaw can be used as normal.This e-ring clip is designed for use on chainsaws manufactured by MTD and Craftsman. It comes as an individual OEM part that is sourced directly from the manufacturer. A pair of pliers, a screwdriver, or an e-clip remover may be needed to replace the e-ring clip.

This is an authentic roller bearing replacement specifically for use with chainsaws. The roller bearing uses a cylinder, which is the roller, rather than a ball. These types of bearings help to allow for greater radial loads than ball bearings. In the chainsaw, they can help to reduce friction and provide smoother motion between the parts. The chainsaw roller bearings tend to have a lot of wear and tear from repeated use. This means that over time, they can start to wear out. Owners who find that the chainsaw is not functioning smoothly as it did before might want to check on and replace their roller bearings. If there is low oil pressure or if there are knocking noises in the engine, it could be due to bad bearings. These are genuine OEM roller bearings for use with chainsaws. This set comes with two roller bearings. Buyers might want to have some extra on hand for the next time they need to change out the bearings. Compatible brands for this product include electric chainsaws from Craftsman and MTD.

This replacement part is a center sprocket. This is a genuine replacement part made by MTD. This part is used to connect certain pieces and use a turning or rotating mechanism to allow the engine to run properly and effectively. A new center sprocket might be needed if the current one has worn ridges. This can be due to a high level of friction after years of normal wear and tear. Because of the rotating motion, this part can be easily stripped over time and will need to be replaced. Wear work gloves during this repair to prevent injury to the user and those around them. This is a genuine OEM replacement part. This part is sold individually and is sourced directly from the manufacturer.

This cutting chain is a genuine MTD part, sold individually. This cutting chain can be used as a replacement part for a chainsaw. The cutting chain chops through wood and other materials while the appliance is in operation.The cutting chain of a chainsaw might have to be replaced at some point within the standard lifespan of the appliance. If the teeth of the cutting chain wear out, the chain should be removed and replaced by this genuine OEM replacement part. Remember to always wear gloves when handling, repairing, and operating outdoor equipment. Always unplug the appliance before performing any kind of repair or replacement. This is an OEM part sourced directly from the manufacturer, and it is sold individually. This cutting chain is compatible with the following outdoor appliance brands: MTD and Craftsman.