316902214 Parts

The ignition coil replacement module assembly is used in lawn trimmers. It creates charges of high pulses of electric current. The ignition coil's current sends the voltages down the spark plug wire to the spark plug and then the engine. Signs the ignition coil may need replacing include poor performance, inability to engage the machine, and unusual noises. An ignition coil will wear out with routine use, or it can become damaged with improper usage. Replacing the ignition coil in a trimmer requires a screwdriver, socket set, adjustable wrench, and star bit screwdriver. Allow the engine to cool completely before disassembly. It can be achieved in about 30 minutes. Wear gloves for safety. Make notations of all removed pieces for easier reassembly after the replacement part has been installed.This replacement module is an authentic OEM part sourced from the manufacturer. It is compatible with several different lawn equipment brands, including MTD, Cub Cadet, and Troy-Built. The module is found in numerous trimmer machines. The replacement part is sold individually as one module assembly. Included with the assembly are the screws, spark plug boot, and rubber insulated wire. The piece is made from durable plastic and metal.

This replacement part is cutting line. It is a genuine replacement part made by MTD. This part is used in lawnmowers to ensure clean, even cuts during use. Cutting line might be needed if the user desires a more professional look when cutting grass. This line is used to create lines so the user may follow the pattern while working. Be sure to purchase enough of the cutting line to ensure it fits the entire yard. Be sure to find other resources on how to use the cutting line prior to putting it to use. This cutting line is a genuine OEM replacement part to ensure long-lasting use. This part is sold individually and is sourced directly from the manufacturer to ensure a proper fit.

This replacement part is a drive shaft intended for use in various lawn equipment. This is a genuine replacement part made by MTD. Drive shafts are responsible for rotating the cutting head on the appliance so that the user is able cut a clean line while mowing or cutting grass.A new drive shaft might be needed if the user notices that the cutting head is no longer rotating, or is unable to start. If the cutting head stops spinning in the middle of using the appliance, the drive shaft might need replacing. It is not unusual for this part to require replacement after years of normal use. Be sure the appliance is completely powered down and cooled off before attempting to replace this part.This is an OEM part sourced directly from the manufacturer. It is sold individually. This replacement part is compatible with lawn equipment made by MTD.

This replacement fuel cap is used with many types of gas-powered lawn and garden tools. The purpose of the fuel cap is to help keep dirt and debris out of the fuel tank. It also helps to reduce extra air from getting into the tank.Debris or air in the fuel tank can make it difficult to start a gas-powered machine. Dirt can cause damage to the engine, as well. The replacement fuel cap is a simple way to ensure these types of issues do not occur. Most fuel caps can last for many years without needing a replacement. However, over time, they could become damaged or worn out from too much use. The old cap can be removed and the new cap can be screwed onto the fuel tank to replace it. No tools are needed.The fuel cap can be used with trimmers and blowers from a range of manufacturers including Yard Machine, Cub Cadet, MTD, Craftsman, Murray, Remington, and Troy-Bilt. This is a genuine OEM part sourced from the manufacturer, and it is sold individually.

This coupler features a split-boom design that includes the knob, coupler, and the screws required to attach the upper shaft and lower boom before using the trimmer. Because of constant exposure and potential debris impacts, the coupler can become damaged over time and with regular use. The knob and screws can also become damaged or lost, which would require replacing the entire unit with an OEM replacement like the one here. This genuine OEM drive shaft coupler is manufactured by RYOBI and designed for use with their trimmers, as well as machines from MTD, Yard Man, Yard Machines, Bolens, Troy-Bilt, and Cub Cadet. It can also be used with select models of edgers and pruners from these brands. This coupler is sold as an individual assembly with all of the pieces required to complete the installation. The shaft is made of durable metal and the knob is a sturdy plastic piece. It will require a screwdriver with a Philips head to replace this part. Always wear gloves when working on lawn and garden equipment.

This transmission pulley is intended for use with many tiller models from popular brands. The pulley is used to hold the belts that help to drive the transmission and run the machine. Damaged pulleys will often cause a squeaking sound while the engine is operating. If a transmission pulley is damaged, the tiller may not be as efficient or as easy to use as it was before.The pulley is made from quality metal and is durable. However, it could become damaged, or it could start to degrade and corrode over time. When there are issues, the owner should replace the pulley before the problem worsens. If the pulley fails, owners will need to replace it before they use the tiller again.The transmission pulley is compatible with some models from Troy-Bilt, Yard Machines, MTD, Cub Cadet, and Husky. The pulley is sold individually, and it is a genuine OEM replacement part sourced from the manufacturer.

The roller cable guide is designed for use with lawnmowers. It supports and guides cables to the lasher in the mower.This roller cable guide is a genuine OEM part sourced directly from the manufacturer and is sold individually. This roller cable guide is compatible with the following brands: Craftsman, Cub Cadet, Ryobi, Troy-Bilt, Yard Machines, MTD, Huskee, Montgomery Wards, Bolens, and Yard-Man.

Few parts fulfill as many roles on lawn mowers and other landscaping power tools than the cover screw. This screw serves to attach metal housing parts, assemblies, and shrouds to one another on equipment such as power vacuums, snow blowers, edgers, tillers, hedge trimmers, lawn tractors, leaf blowers, grass trimmers and cultivators. As these are extremely durable metal screws, they seldom fail under ordinary use. It should be noted, however, that they are most often used at connection and pressure points. Stresses at these junctions sometime loosen screws, causing them to be lost or occasionally resulting in stripped threads. It's also occasionally the case that these screws are lost during repair or routine maintenance of yard equipment because of their small size. Users should make sure to consult their owner's manuals for replacement steps and any special instructions. Because of their small size and the ease of losing them during repair work or maintenance, it's recommended to keep a supply of appropriately sized screws on hand. Most importantly, when replacing a part make sure to use a genuine OEM replacement part. They are manufactured according to the specs of the original parts and are perfect replicas.

This part is a replacement bolt. This is a genuine OEM part made by MTD and has been sourced directly from the manufacturer. This part's intended use is to replace a broken, stripped or defective bolt in outdoor power equipment.Bolts are important for holding together various components of the equipment. They are a standard piece of hardware that can become easily lost, stripped, corroded, or defective, requiring replacement. When working on or near an engine, it's important to make sure the equipment is powered off and completely cooled down before starting any repairs. For more accurate information on how and where to install this bolt, reference the appropriate owner's manual and specific equipment diagrams.This is an authentic OEM replacement part made of high-quality metal. This bolt can be used with different models of outdoor power equipment that have been manufactured by MTD, Craftsman, and other brands. Part sold individually.

This replacement part is a screw, and it is intended for use in different types of lawn equipment. This is a genuine replacement part made by MTD. Screws are found in almost every different type of machinery and are essential to the overall performance of different devices. Screws are responsible for holding things in place and securing them tightly so that the machine can operate smoothly and efficiently. A new screw might be needed if the current one is damaged or missing. It is possible for screws to be stripped over time and can become stuck in place. In this case, pliers might be needed to remove the faulty screw. Otherwise, this repair should be fairly simple and only require a screwdriver. Be sure the machine is powered down before replacing this part. This specific screw is sold individually and is a genuine OEM replacement part. Be sure to purchase the correct amount as many devices require more than one.

The On/Off Switch is an OEM part for MTD outdoor power equipment. This switch is a crucial component for the safe operation of various types of lawn and garden equipment, including lawn mowers, snow blowers, and other powered tools. 

Causes of damage to the On/Off Switch often involve wear and tear from regular use, exposure to harsh outdoor conditions that can corrode or damage electrical components, or accidental impacts that can physically damage the switch.

Symptoms of a bad On/Off Switch include:

• The equipment failing to start
• The machine not stopping when the switch is turned to the off position
• Intermittent power or erratic starting and stopping

This OEM replacement part can be used on trimmers from Craftsman, Yard-Man, Cub Cadet, Bolens, Ryobi, Huskee, Troy-Bilt, MTD, Murray, and Yard Machines.

This throttle trigger spring is an OEM part sourced directly from the manufacturer, and it is sold individually. It is manufactured by MTD. This throttle trigger spring is designed for use with edgers or trimmers. It is compatible with products from brands such as Craftsman, Cub Cadet, Ryobi, Troy-Bilt, Murray, Yard Machines, MTD, Bolens, and Yard-Man.The throttle trigger spring part is crucial to the proper functioning of the throttle. The purpose of the throttle trigger spring is to help the throttle trigger to retract. The replacement or repair process of the throttle trigger spring should be straightforward, but a screwdriver and pliers will be necessary to complete the replacement. The user replacing the part should always wear gloves during any assembly, replacement, or installation processes. The user should also refer to the owner's manual of their equipment and any guiding diagrams that clarify the placement location. This throttle trigger spring is made out of metal.

This part is a replacement wheel assembly. This is a genuine OEM part made by MTD and has been sourced directly from the manufacturer. This part will replace a broken or defective wheel assembly in several tiller models.The wheel assembly ensures that the tiller can be maneuvered efficiently by the equipment operator. Wheels are particularly subject to wear and tear and may require replacement before the standard lifespan of the equipment. A wheel that is punctured, dented, flat, or worn may prevent the tiller from proper operation. It's important when working on or near an engine to make sure the equipment is powered off and completely cooled down before starting any repairs. Access to proper tools is recommended before attempting this part installation. For more accurate information on how and where to install this wheel assembly, reference the appropriate owner's manual and specific equipment diagrams.This is an authentic OEM replacement part made of high-quality materials. This wheel assembly can be used with tiller models that have been manufactured by MTD, Troy-Bilt, Yard Machines, and Husky. Sold individually.

This part is a replacement mandrel bearing. This is a genuine OEM part made by MTD and has been sourced directly from the manufacturer. This part can be used to replace a defective or broken mandrel bearing in a variety of lawn tractor models. Mandrel bearings are a critical component that ensures no excess heat, friction, or vibration occurs while the equipment is in use. Bearings are subject to wear and tear and will require replacement when no longer working effectively. When working on or near an engine, it's important to ensure that the equipment is powered off and completely cool before beginning any repairs. For more accurate information on how and where to place this mandrel bearing, the appropriate owner's manual and equipment diagrams should be referred to. As an authentic replacement part, this mandrel bearing is suitable for use on lawn tractors manufactured by MTD, Craftsman, Troy-Bilt, and other brands. Please note that this is a genuine part made of high-quality, durable metal and is sold individually.

This replacement part is a push rod kit. This is a genuine replacement part made by MTD. This part is commonly found in certain types of lawn mowers and assists the user in maneuvering the machine in the desired direction.A new push rod kit might be needed if the current one is damaged in any way. This might include being bent, dented, cracked, or chipped. If this is the case, the rod might not be able to function properly and should be replaced so that the appliance can return to working order. Be sure the engine is powered down before attempting to replace or repair this part in any way. This is a genuine OEM replacement part. This part is sold individually and is sourced directly from the manufacturer.