423A Parts

The Lens is an OEM component for Frigidaire freezers. It acts as a transparent cover and protective barrier for the freezer compartment lights. Crafted for durability and clarity, the lens avoids frost and minimizes condensation while allowing visibility inside the freezer.

Causes of a bad lens can include deep scratches or cracks developing over time from repeated wiping or exposure to chemicals like frost removers.

Symptoms of a bad freezer lens include:

• Cloudiness, fogginess, or smears inhibiting internal visibility
• Cracks or breaks compromising the protective barrier
• Distorted views make it difficult to assess food levels
• Diffused lighting with shadows instead of a clear view

This OEM Frigidaire part can also be used on Electrolux, Frigidaire, Gibson, Kelvinator, Westinghouse, and Sears/Kenmore.

The Motor Assembly is an OEM part for Broan range hoods. This part is the driving force behind the extraction and circulation capabilities of your range hood, efficiently removing smoke, grease, and odors from the kitchen air. 

Causes for replacement include noticeable decreases in suction power, abnormal sounds indicating mechanical wear, or failure to start, all of which can compromise your kitchen's air quality and comfort.

Symptoms of a bad Motor Assembly include:

• A noticeable reduction in exhaust efficiency, failing to clear smoke or odors effectively.
• Increased noise levels, such as grinding, humming, or buzzing, suggesting the motor is struggling.
• The range hood not operating at all, pointing to a potential motor failure.

Color: white.

This factory replacement cover fits select Broan ventilation units. It replaces a cracked, damaged, or missing cover to protect internal components, restore a clean finished appearance, and help maintain proper airflow and performance.

• Shields internal wiring, fan, or control components from debris and accidental contact
• Helps direct airflow through the housing for consistent operation
• Restores a secure fit if the original cover is cracked, warped, or broken
• Common symptoms include rattling/vibration, poor fit, exposed parts, or a loose/missing cover

• Disconnect power to the unit before servicing
• Support the cover and remove retaining screws or release tabs; note orientation for reassembly
• Transfer any clips, grommets, or seals from the old cover if applicable
• Reinstall securely without overtightening; verify clearance and operation before restoring power

This retainer is a small mounting clip used in Broan ventilation hoods to hold trim, lenses, or small assemblies securely in place. Replacing a worn or broken retainer restores stable mounting and reduces vibration or rattling. What it does:

• Secures trim pieces, light lenses, or small assemblies so they stay aligned and seated
• Prevents parts from shifting or vibrating during operation
• Helps stop rattling or loose components around the hood opening
• Keeps replaceable covers and lenses from falling out when installed correctly

• Disconnect power to the appliance or turn the circuit breaker off before working on the hood
• Use common hand tools as needed; handle sharp sheet-metal edges with gloves
• Verify this retainer matches the damaged piece before installation

The wheels of a lawnmower and other lawn care equipment take a lot of abuse, even on well cared for machines. They can wear down over time, making it difficult to maneuver the equipment. Eventually, it may be necessary to replace the wheels if they are no longer rolling properly or if they have cracked. This wheel is eight inches in diameter and is easy to replace in just a few minutes. This OEM replacement wheel is sold individually and is compatible with many different types of lawn and garden equipment. These include lawnmowers, snowblowers, tillers, edgers, and log splitters. The wheels work with a range of brands, including Craftsman, Mastercut, Montgomery Wards, Sears, Bolens, MTD, Yard Machines, and Cub Cadet. Keep in mind that this is an individual wheel, so be sure to get as many as needed for the equipment.

This name plate is the small identification label that mounts to the appliance to display model and serial information. It restores a legible ID label so you can easily identify the unit for service or parts ordering. What it does:

• Replaces a missing, worn or damaged identification label
• Provides visible model/serial and manufacturing information for repairs
• Restores the appliance's factory identification for resale or inspection

• Clean and dry the mounting surface before installing for best adhesion
• Peel backing or attach with the existing fasteners, aligning carefully to avoid wrinkles
• If the old label is stuck, remove it gently with a plastic scraper and an appropriate adhesive remover
• Always disconnect power to the appliance before performing any service that requires access to internal panels

This shoulder screw secures moving or fixed appliance components by providing a built-in spacer and pivot point for proper alignment and smooth operation. It restores correct fit where a worn or missing shoulder fastener causes play. What it does:

• Provides a precision spacer and pivot for hinges, drawers, or linkage assemblies
• Holds components at the correct distance to prevent rubbing and binding
• Helps stop wobble, misalignment, rattling, or uneven movement when the original shoulder screw is worn or missing
• Works where a headed screw with an integrated shoulder is required for smooth rotation or exact spacing

• One shoulder screw

• Disconnect power and remove the appliance panel or access covers before replacing hardware
• Handle small parts carefully to avoid dropping them into assemblies; magnetic pickup tool can help
• Install in the original location and tighten securely but avoid overtightening; do not modify the shoulder or thread
• If the screw secures a load-bearing hinge or mechanism, verify alignment and operation after installation

This part is a replacement screw. This is a genuine OEM part made by MTD and has been sourced directly from the manufacturer. The intended use for this part is to properly replace a defective, stripped, or lost screw outdoor power equipment.Screws are a standard piece of hardware that securely holds together different equipment components. If a screw is missing, corroded, stripped, or otherwise ineffective, they should replace the screw with a genuine OEM part. Always ensure that the equipment is completely powered off and is cooled down before attempting to start the repair process. For more accurate information on the installation of this particular screw, reference the owner's manual or equipment diagrams for specific instructions and part location. This is an authentic OEM part and as such is sold individually and made from durable and high-quality metal. This screw can be used with outdoor power equipment manufactured by MTD, Craftsman, and other brands.

This is an oval c-sunk screw commonly used in mowers and snowblowers to help secure the throttle housing to the upper handle. If there is a problem with the screw, it should be replaced to ensure the proper function of the machine.The screw is made from metal and it should last a long time. However, there could be several reasons to replace the screw. It might become lost when working on other parts of the machine. The threads could be stripped, or the head of the screw could start to wear away or corrode over time. Replacement of this piece is usually fast and easy, but it can depend on the location of the screw.The oval c-sunk screw will work with models of machines from MTD, Mastercut, Husky, Western Sun, Lawn Hawk, Wizard, Servistar, and Tradesman. The screw is sold individually. It is a genuine OEM replacement part.