Need Help?
Call or text
Some parts shown may not be for your model. To see parts for your model only, select it from "Matching Model Numbers" list on the left.
The Handle is an OEM part for Frigidaire freezers. This handle is designed for easy and secure opening and closing of the freezer door, providing a firm grip for accessing the freezer compartment.
Over time, the freezer handle can become worn out or damaged due to frequent use, physical impact, or exposure to varying temperatures. Causes of a bad handle can include cracking, loosening of the attachment points, or discoloration.
Symptoms of a bad freezer handle include:
This OEM replacement is also compatible with Electrolux, Gibson, Kelvinator, and Kenmore models.
I determined that it was a problem that occurred during the defrost cycle by resetting the GFCI outlet and forwarding the defrost timer until the defroster came on. Once the defrosting began, the GFCI outlet would reliably trip. I took apart the shielding inside of the freezer and tested the defrosting without the heating element or the thermostat connected. Since that looked good, I tested for proper functionality of the thermostat by removing it, placing it in a working freezer, and checking... Read more
Replaced thermostat Read more
This replacement part is a control board for an ice maker. Control boards serve as the main computer that controls the functions of the ice machine.Before installing this part, unplug the ice maker and pull it away from the wall. Then unthread screws of the access cover to the control panel. Use a putty knife to pry the cover off and proceed to remove the screws securing the top panel. Use a nut driver to remove the rear panel. Lift the top panel up and have someone hold it upright. Remove the screws that hold the control housing on the top panel. Once control housing has been released, remove the screws securing the grounding wire to set the panel aside. Then with a Phillips head screwdriver, unthread the screws that hold the control board. Depress the tab to release the board. Note the orientation of the wire connectors and disconnect them from the board. Re-secure the wire connectors to their correct terminals and pop the new control board back in place. Reinstall the panels that were removed. This genuine replacement part is a control board compatible with Whirlpool, Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Sears/Kenmore brand ice machines.
I had to replace the control board. The repair estimate from a local appliance company was $530.00. So I decided to order the part here for $200 and do the installation myself. Everything on the control board is "plug and play" and very simple ONCE you have access to it. However, gaining access to the board is the tricky part. Unless you have the long enough tools, it can be a real challenge. I had to first remove the water drain unit. Next, the ice cutting wire cover. Then remove the ice... Read more
I replaced the gasket on the door. Pretty easy to do . Had to unscrew panel a bit to get it in there good, but appears to be working. Use the hairdryer trick to loosen up the gasket for a better fit. Read more
The plug that the pump plugs into had a pin missing. Replaced pump plug harness. Unit must be disassembled to replace this harness. Great experience with ordering parts online and service from appliance parts pros. Read more
The Evaporator thermistor which you shipped fixed the problem. Read more
Sold individually.
Ordered new feet that fit unit. Read more
Just 1 days wait the part came in as promised and installed in seconds Read more