500 Parts

This tube-pick up was created for three to five horsepower horizontal and five horsepower vertical engines with a two to three-quart tank and a pulse jet carburetor. As part of the carburetor, the tube-pick up moves gas from the float bowl to the main body of the carburetor. Sometimes the tube-pick up can become clogged up with particles and dirt, which makes it harder for gasoline to flow through it. This component can also become damaged or cracked, which means it will need to be replaced to operate the lawn equipment. Replacement requires removing the carburetor from the fuel tank, removing the tube-pick up and installing the new version. Carb cleaner may also be used in the process. This tube-pick up is a genuine OEM product directly from the manufacturer. It comes as an individual part and is made out of plastic. It is used for engines on leaf blowers, generators, tillers, lawn tractors, and lawnmowers by Simplicity, Briggs & Stratton, Cub Cadet, and Toro. A set of pliers may be needed to install the tube-pick up.

The carburetor float is housed in the carburetor and is used to help control the fuel flow. It adjusts the needle valve and ensures that the appropriate amount of fuel reaches the carburetor bowl. This helps provide the right mixture of air and gasoline for the engine to operate at optimal performance. Over time, the float can become worn or detached, or the pin could come loose. When this happens, the flow is affected, and the engine will not operate correctly. If the float isn't working correctly on a lawnmower or another small engine, it might be time for a replacement. This replacement part is a genuine OEM product designed to be used with many Briggs & Stratton engines, including lawnmowers, pressure washers, generators, and other lawn and outdoor equipment engines. It is sold as a single unit with the metal cotter pin included. There are more than 150 compatible machines that this unit will work with. If your lawnmower isn’t working as it should or if the float has come loose and can't control the flow appropriately, this OEM replacement can get things back in working order.

This is a high-quality starter motor that is used for small engines installed on a variety of lawnmower models. The starter motor is responsible for providing initial motion, which causes the flywheel to engage and start the engine. The starter motor is located on the engine crankcase and makes the flywheel teeth connect with the starter motor plunger teeth to power up the engine. A bad starter motor can have many symptoms, including a clicking noise when the ignition is pressed, cranking noises without engine turnover, or a lawnmower that does not start.If the starter motor needs to be replaced, the lawnmower will need to be disassembled to access the part. Remove the shroud, disconnect the battery, and remove the fan. The flywheel can be removed using a gear puller, after which the wire and bolts should be removed. Next, remove the starter motor and replace it with a new part.This starter motor is an authentic OEM replacement component that is directly sourced from the manufacturer. It is sold as an individual part. The motor is designed for use with lawnmowers manufactured by Briggs & Stratton, Craftsman, Cub Cadet, Toro, and Simplicity.

This adjustable pin bar is used on chainsaws and other lawn and garden equipment to ensure a blade is adjusted to the appropriate rate of tension. When the chainsaw blade is properly adjusted, it will cut faster and better. The pin bar is made out of a durable metal but can become damaged over time. If the pin bar is not working correctly or has broken, it will need to be replaced.If a chainsaw or pole pruner is no longer performing as well as it used to, the adjustable pin bar may need to be replaced. To replace this pin, the cover of the chainsaw will need to be removed. Take the gear that has the screw and pin bar on it out of the machine. Next, remove the broken adjustable pin bar and replace it with a new part. Reassemble the tool for it to be ready to use.This adjustable pin bar is designed for use on Craftsman, Poulan, Poulan Pro, and Husqvarna chainsaws, pole pruners, and string trimmers. It is a genuine OEM replacement component that is directly sourced from the manufacturer. The part is sold individually.

This replacement part is a screw. It is a genuine replacement part made by Husqvarna. Screws are small yet very important to the overall operations of many different machines and appliances. Screws are able to hold other parts in place and secure so that everything can operate smoothly. A new screw might be needed if the user notices that the current ones are damaged or missing. It is possible that screws become stripped or lodged over time and must be replaced. The repair should be fairly easy, only requiring a screwdriver or pliers if the previous screw is stuck. Be sure the engine is completely powered down before starting a repair. This screw is sold individually. Be sure to purchase the correct amount as many appliances require more than one. This is a genuine OEM replacement part sourced directly from the manufacturer.

This nut is used to attach a mounting bar to a chainsaw or pole saw. The nut attaches in slightly different ways depending on the product, but it will feed a bolt that attaches the base of the bar to the pole or housing of the saw. If the nut becomes stripped or corroded due to exposure to the elements, it will need to be replaced. A socket wrench and a socket set are needed to install the part. simply screw it into the chain bar studs, making this a quick and easy replacement. The flat side of the nut should face outward to create a flush effect with the rest of the handle. The other side will fit into the bar. This part sold independently. It works with both Poulan and Husqvarna products and is a genuine OEM product sourced directly from the manufacturers.

This screw is a genuine MTD part, sold individually. This screw can be used as a replacement part in string trimmers, edgers, chainsaws, and pole pruners.The screw in a small engine outdoor appliance might eventually have to be replaced in the case that the screw is lost, misplaced, or damaged from general wear and tear with long-term use. If the screw is lost or misplaced and its absence is noted by the operator, the screw should be replaced by this genuine OEM replacement part as soon as possible. If the screw is dented, cracked, punctured, or otherwise damaged, it should be replaced by this genuine OEM replacement part.This is a genuine OEM replacement part sourced directly from the manufacturer. It is sold individually. This screw is compatible with the following outdoor appliance brands: MTD, Craftsman, Husqvarna, Weed Eater, Poulan, and Poulan Pro.

This bar adjustment retainer is an integral part of the bar adjustment mechanism that assists with securing the screw in many kinds of lawn and garden equipment. The retainer is made of durable metal and is used to replace a faulty, broken, or damaged original part. Sometimes the bar adjustment retainer will break or become damaged and need to be replaced.If the retainer breaks, it can cause the bar adjustment screw to become damaged or stripped. Inspecting for damage requires taking apart the equipment. Use work gloves to remove the chain bar cover and get access to the retainer. Replace it with a new retainer and screw. The bar adjustment pin should be placed at the end of the screw. Thread the screw through until it catches on the retainer. Once that's complete, the other parts can be reassembled.This bar adjustment retainer is a genuine OEM replacement part that is directly sourced from the manufacturer. It is sold as an individual part. The retainer is made to be used with string trimmers, edgers, hedge trimmers, pole pruners, and chainsaws created by Craftsman, Husqvarna, Poulan, and Poulan Pro. This part is sold individually.

This is a genuine replacement oil filter screen that is made for use in select models of chainsaws. This oil filter is made of durable metal and looks like a spring, designed to hold the paper-like filter that catches the debris before it gets into the engine. This oil filter is exposed to a lot of dirt and debris buildup which is why it should be cleaned or replaced as part of routine maintenance. However, replacing the oil filter holder and housing may not need to be done as frequently. Inspect all parts during maintenance for proper operation. If the oil filter becomes damaged or clogged, it will need replaced. This is a genuine OEM oil filter that is manufactured by Craftsman and designed for use in select models of chainsaws from the brand, as well as select units from Poulan, Husqvarna, and Snapper. The oil filter is sold as a single part and does not include hardware or additional components. Be sure to allow the engine to cool entirely before performing repairs and wear gloves to protect the hands. Because the oil filter is a common replacement, some people will keep an extra on hand in case of emergencies.

This is a replacement oil cap for a variety of small gasoline-powered tools they build. These devices include power saws, chainsaws, trimmers, and pruners. The oil cap is tethered to the oil tank, granting easy access to the engine oil for filling or replacement while preventing outside contaminants from getting into the oil basin and, thus, the crankcase. While the cap is not a moving part, it is one of the most exposed pieces of this work equipment. As such it collides with multiple heavy objects such as other tools, trees, cement structures, and truck beds. This type of wear and tear can cause the interior threads of the cap to warp so that the cap cannot be closed tightly. The cap can also be damaged so that it leaks. For safety reasons as well as for the proper operating condition of the equipment, a damaged oil cap should be replaced immediately. Make sure when removing the old cap that the tether is completely freed from the power tool, and make sure the new tether is properly attached. This replacement cap is a genuine OEM part, built to the same specification as the factory original piece and fits Ryobi and Poulan machines.

This is a thrust washer that can be used as a replacement for the washers in many models of lawn and garden equipment. The thrust washers are flat and are used to ensure that there is no extra space between pieces connected in the machine. The tight fit can help to reduce vibration and prolong the life of the pieces that are being connected. If the washers are missing or have been damaged, it could result in added vibration and sound from the machine.The metal washers tend to be durable. However, they may still need to be replaced. Over time, they could wear down or become corroded. Other times, they might be lost when working on the machine. The replacement is easy.The thrust washer can work in a range of machines including riding mowers, tillers, and tractors from Craftsman and Husqvarna. Each washer is sold individually. Owners might want to have several of these on-hand. This is a genuine OEM replacement part that has been sourced directly from the manufacturer.

This is a replacement reduction shaft that is designed for use with select tillers that are used for outdoor gardening and landscaping. The reduction shaft in a tiller is designed to decrease the rotational speed of the unit and attach the upper and lower parts of the tiller. This shaft is subject to constant rotation and excessive vibrations, so it is known to become worn over time. It may also strip at the threads or become otherwise damaged, which would require a replacement. This genuine reduction shaft is manufactured to exact OEM standards by Husqvarna and is compatible with units from the brand, as well as select models from Weed Eater, Poulan, and Jonsered. It is made of durable metal and features two threaded ends. This part is sold as an individual component. Any other parts or hardware will require an additional purchase. It can provide an exact replacement for models that need a new shaft. Owners should always wear gloves for hand protection and work in a well-ventilated area. When repairing the internal parts of a tiller, it will be important to use caution so as not to cause further damage.

The cutting chain on a garden tiller is used as the primary chain to help drive the unit across the soil. Over time, the chain can start to stretch and may not work as well as it did when new. It can also break entirely and require a full replacement with a new cutting chain. Inspecting the chain can give insight into whether it is stretched or has broken and requires a repair or replacement.A screwdriver and a set of wrenches will be needed to replace this part. The process involves removing all of the components out of the chain case. Next, the bolts that hold the case together will need to be taken out. Once the cutting chain is removed from the tiller, the new replacement part can be placed in the same location. After it has been placed, the rest of the parts will need to be reassembled before using the tiller.This cutting chain is compatible with Husqvarna, Poulan, AYP, McCulloch, Poulan Pro, RedMax, Weed Eater, Jonsered, and Craftsman tillers. It comes as an individual OEM replacement part that is sourced directly from the manufacturer.

This replacement part is a tiller chain intended for use in lawn equipment. This is a genuine replacement part made by Husqvarna. Tiller chains link parts of the machine so that the entire appliance can run smoothly. These chains ensure that the parts in the tiller or cultivator are rotating smoothly.A new tiller chain might be needed if the current one is damaged or broken in any way such as being split or torn. The user might be able to tell when the tiller chain is malfunctioning if there are unusual noises coming from the machine. Be sure the appliance is completely powered down and cooled off before attempting to replace this part. It is recommended that the user refer to the appliance manual for more detailed instructions on how to install this part. This is an OEM part sourced directly from the manufacturer. It is sold individually. This replacement part is compatible with lawn equipment made by Husqvarna.

This lever lock is a genuine Husqvarna part. It is designed to be a replacement part for several models of tillers. On a tiller, the lever lock is located on the handle assembly. The lever lock holds the handle in place on the frame of the tiller, so it is a very important part.It is not uncommon for the lever lock to become damaged, especially if the handle is jammed and must be forced. If this happens, the lever lock must be replaced before operating the tiller again. Be sure to allow the engine to cool completely, empty the fuel tank, and disconnect the spark plug or power source before attempting to repair it.This lever lock is a genuine OEM part sourced directly from the manufacturer. It is sold individually. It is compatible with machines made by Husqvarna, Poulan, Craftsman, and Weed Eater. It also replaces obsolete part number 109228X.

This v-belt is a genuine Husqvarna part, sold individually. This v-belt can be used as a replacement part for a tiller. The purpose of a v-belt is to affix the pulley of the motor to the drive mechanism of the appliance so the wheels are rotated, and the appliance can be operated properly.The v-belt might have to eventually be replaced if it suffers damage that cannot be fixed through a simple repair process. A damaged v-belt should be removed and replaced by this genuine OEM replacement part before using the tiller again. It is a simple replacement process that will require only basic tools. Remember to always wear gloves when handling, repairing, and operating outdoor equipment. This is an OEM part sourced directly from the manufacturer. It is sold individually. This v-belt is compatible with the following outdoor appliance brands: Husqvarna, Poulan, and Craftsman.