628 9468894 Parts

Washers are used in various locations on many types of lawn and garden equipment and can help to keep a bolt or screw in place. The washer will also help to spread the load from connection, which can help to reduce the risk of damage. One of the most common reasons to replace a washer is if the current washer is lost. If the washer is corroded or if it has been bent or otherwise damaged, it should be replaced, as well. Replacing a washer is generally easy, but this can depend on the location of the washer that needs to be replaced. The authentic OEM replacement flat washer is sold individually. Having several of these available for future needs is a good idea. The washer can be used on snowblowers, lawn mowers, tillers, edgers, log splitters, chainsaws, and wood chippers. Compatible brands include Craftsman, Cub Cadet, Ryobi, Troy-Bilt, Husky, Murray, Yard Machines, MTD, Huskee, Montgomery Wards, Bolens, Yard-Man, Turf King, and MasterCut.

This clock knob replaces a worn or broken timer/clock control knob so you can easily set or adjust the oven/range clock and timer. It restores a secure grip and clear control over clock/timer settings. What it does

• Fits onto the clock/timer control shaft to allow manual setting and adjustment.
• Provides a firm grip for turning the timer or setting the oven clock.
• Helps restore proper user control when the original knob is cracked, loose, or missing.
• Compatible with the OEM control interface — replaces the original-style clock/timer knob.

• Disconnect power to the appliance before servicing to prevent electrical shock.
• Typically installs by aligning the splines and pushing the knob straight onto the control shaft; avoid forcing at an angle.
• If the original knob is stuck, use a gentle, even pulling motion or a non-marring puller tool; protect surrounding surfaces.

This handle cover protects and finishes the end of a refrigerator door handle, restoring appearance and covering mounting hardware for a clean look. It's a simple cosmetic replacement that helps prevent dirt buildup and wear. What it does:

• Replaces a cracked, faded, or missing door handle end cap
• Covers exposed screws and mounting points for a neater door finish
• Helps keep dirt and moisture out of the handle mounting area
• Restores the original appearance of the door handle

• Basic screw or snap-on installation; handle may need loosening or removal to install
• Turn off power to the appliance only if required by your model's service instructions
• Use proper tools and avoid overtightening fasteners to prevent cracking

This mechanical temperature control thermostat replaces a failed refrigerator control that cycles the compressor to maintain proper internal temperature. Restores reliable on/off switching so the appliance can hold set temperatures. What it does:

• Senses cabinet temperature and opens/closes the compressor circuit to regulate cooling
• Stops extended compressor run or prevents compressor from starting when thermostat fails
• Addresses symptoms such as warm refrigerator, inconsistent temperatures, or excessive cycling
• Works with mechanical control systems that use a physical sensing element

• Disconnect power to the appliance before starting any work
• Access may require removing the control housing or inner cabinet trim; keep track of fasteners
• Handle the sensing element gently; avoid kinks or sharp bends in the capillary/sensing tube

This screw is a genuine MTD part. A screw can be used as a replacement part in lawn mowers, snowblowers, tillers, chainsaws, log splitters, and wood chippers. The purpose of this genuine OEM part is to rotate and pierce into one or more components within the internal or external machinery of the appliance so that the stability of those components is maintained throughout general use of the appliance.The screw in an lawn equipment might need to be replaced if it has been lost, misplaced, or has suffered enough damage as to loosen the components that it is supposed to secure.This component is a genuine OEM replacement part sourced directly from the manufacturer. It is sold individually. This screw is compatible with equipment manufactured by MTD, Craftsman, Cub Cadet, Ryobi, Troy-Bilt, Murray, Yard Machines, Huskee, Montgomery Wards, Yard Man, Turf King, and MasterCut.

This part is a replacement screw. This is a genuine OEM part made by MTD and has been sourced directly from the manufacturer. The intended use for this part is to properly replace a defective, stripped, or lost screw outdoor power equipment.Screws are a standard piece of hardware that securely holds together different equipment components. If a screw is missing, corroded, stripped, or otherwise ineffective, they should replace the screw with a genuine OEM part. Always ensure that the equipment is completely powered off and is cooled down before attempting to start the repair process. For more accurate information on the installation of this particular screw, reference the owner's manual or equipment diagrams for specific instructions and part location. This is an authentic OEM part and as such is sold individually and made from durable and high-quality metal. This screw can be used with outdoor power equipment manufactured by MTD, Craftsman, and other brands.

This oval screw is a genuine MTD part, sold individually. An oval screw can be used as a replacement part for outdoor appliances including humidifiers, lawn mowers, snowblowers, tillers, log splitters, and wood chippers.The oval screw for one of these outdoor appliances might be subject to enough damage that could mandate a complete replacement of the part. Additionally, the oval screw could be lost or misplaced, as it is a small component that might not alert the operator of the appliance to its absence immediately. Refer to the manual for detailed instructions.Sourced directly from the manufacturer, this component is a genuine replacement part that is sold individually. This oval screw is compatible with the following outdoor appliance brands: MTD, Craftsman, Ryobi, Cub Cadet, Troy-Bilt, Murray, Yard Machines, Huskee, Montgomery Wards, Yard Man, Turf King, and MasterCut.

This part is a replacement screw. This is a genuine OEM part made by MTD and has been sourced directly from the manufacturer. This part can be used to replace a broken, stripped, or misplaced screw in a variety of small engine outdoor power equipment models. This screw is a standard piece of hardware that has multiple different uses depending on the equipment in question. In general, screws are used to hold together parts the equipment securely. A genuine OEM screw should be used in order to ensure good quality and a proper fit. It's important when working on or near any engine to make sure the equipment is powered off and completely cooled down before starting any repairs. For more accurate information on how and where to install this screw, the appropriate owner's manual and equipment diagrams should be referenced. As an authentic replacement part, this screw is suitable for use on several different models of small engine outdoor power equipment manufactured by MTD, Troy-Bilt, Craftsman, and other brands. Please note that this is a genuine part made of high-quality, durable metal and is sold individually.

This nut is a genuine MTD part, sold individually. This nut can be used as a replacement part in lawnmowers, snowblowers, tillers, string trimmers, and chainsaws. The purpose of the nut for one of these outdoor appliances is to serve as a fastening component, in conjunction with a bolt, to secure one or more components to other components within the internal mechanisms of the appliance.The nut in a small engine outdoor appliance might have to be replaced if the small component is lost, misplaced, or damaged. If the nut goes missing during the standard operation of the appliance or if the nut is stripped away from general wear and tear with long-term use, the nut should be replaced by this genuine OEM replacement part.This OEM part is a genuine replacement that is sold individually and sourced directly from the manufacturer. This nut is compatible with the following outdoor appliance brands: MTD, Craftsman, Cub Cadet, Ryobi, Troy-Bilt, Yard Machines, Huskee, Montgomery Wards, Yard-Man, and MasterCut.

A flat washer is used in a variety of applications, such as being placed under bolts or nuts as a means to help distribute the load over a larger area and to help ensure the nuts and bolts do not become loose over time. The washers also help to protect the surface from corrosion and damage. Not having washers could reduce the lifespan of a machine. It is important for buyers to replace washers that may have been lost or become damaged. The washers should be checked for signs of corrosion, cupping, or other damage that would necessitate replacement. Buyers should always make sure they are getting the correct size. The flat washer is an OEM part sold individually. It can be used for a range of different types of outdoor machines and more. Some of the types of machines that typically use these washers include lawn tractors, tillers, lawn mowers, chippers, shredders, and snowblowers. Brands include MTD, Yard Machines, Yard-Man, Troy-Bilt, Poulan, and Ryobi.

This replacement part is a washer. This part is a genuine replacement part made by MTD. Washers are an important part of many different types of appliances. These small pieces work together with nuts and screws to help different parts of the machine stay in place and secure so that everything operates smoothly. A new washer might be needed if the current one is missing or damaged in any way. It is possible that washers can become stripped over time and might not stay in place. If this is the case it is recommended that it be replaced. This repair should be fairly easy and only require a screwdriver and possible pliers. Be sure to wear work gloves during this repair. This is a genuine OEM replacement part. This part is sold individually and is sourced directly from the manufacturer to ensure proper fit and long-lasting use.

This part is a replacement flange bearing. This is a genuine OEM part made by MTD and has been sourced directly from the manufacturer. It is intended to replace a defective, worn, or broken flange bearing in various models of outdoor power equipment.Bearings reduce friction between moving parts and thus are essential to proper equipment functionality. Bearings may become worn, corroded, or ineffective over time and thus will need to be replaced with a genuine OEM replacement part. Wear work gloves to protect the hands and check that equipment is powered off and cooled down before starting the repair process. For more accurate information on how and where to use this flanged bearing, the appropriate owner's manual and equipment diagrams should be referred to. This flange bearing is a genuine OEM part made of durable metal and is sold individually. It is suitable for use with outdoor power equipment models that have been manufactured by MTD, Craftsman, Troy-Bilt, and other brands.