664Vg6mxba Parts

This insert is a small OEM component designed to fit into a specific location on your appliance to secure, align, or finish an assembly. Replacing a worn, damaged, or missing insert restores proper fit and clean appearance.

• Provides a snug interface or cover within the designated assembly
• Helps prevent looseness, vibration, or gaps in the connected part
• Replaces cracked, worn, or missing insert pieces
• Common symptoms include loose or wobbly parts, misalignment, or a missing cap/cover

• Disconnect power and shut off gas/water before servicing
• Refer to your model's parts diagram to confirm location and orientation
• Use non-marring tools to avoid cosmetic damage
• Seat the insert fully; do not overtighten adjacent fasteners

This surface burner igniter creates the spark that lights a gas cooktop or range burner. The attached wire lead simplifies hookup and helps restore quick, dependable ignition when a burner won't light or only lights intermittently.

• Generates a high-voltage spark at the burner to ignite gas
• Restores reliable burner lighting and consistent flame startup
• Common symptoms: burner won't ignite, no visible spark, intermittent lighting, or a chipped/cracked ceramic insulator
• Replaces a worn or damaged electrode to eliminate the need for manual lighting

• Disconnect electrical power and shut off gas before servicing
• Allow the cooktop/range to cool; handle the ceramic tip carefully to avoid damage
• Match the igniter position/orientation to the original for proper spark at the burner
• Route the lead away from sharp edges and heat; make a secure connection to the harness, then test for spark before reassembly

This spark module supplies the high-voltage pulses that ignite the surface burners on a gas cooktop or range. Replacing a failing module helps restore consistent clicking and spark so burners light promptly and reliably.

• Supplies high-voltage to up to five surface igniters (5+0 configuration)
• Sends spark when a burner control is turned to Lite
• Failure symptoms can include no spark on all or multiple burners
• May also cause intermittent/weak spark or continuous clicking

• Disconnect power and shut off gas before servicing
• Note wire locations; move one connector at a time to matching terminals
• Mount securely in the original position and ensure proper grounding
• After replacement, if only one burner won't ignite, inspect that burner's switch and igniter

The Knob is an OEM part for Whirlpool electric ranges. As an external interface component, the knob activates burner heat settings selected through the control panel. 

Symptoms of a bad knob include:

• Failure to lock burner heat levels securely  
• Looseness preventing selection of intended settings
• Cracks or breaks at the mounting points on stems

Causes involve normal wear stripping connection points over time, impact damage dislodging knobs, or warping from heat exposure affecting secure attachment.

This OEM Whirlpool part is also compatible with some Maytag and KitchenAid ranges.

This mounting bracket secures a component or panel to the appliance frame, keeping it aligned and stable during operation. Replace a cracked or bent bracket to stop looseness, rattling, or shifting and restore proper support.

• Anchors the specified component or panel to the chassis
• Maintains correct position and spacing for reliable operation
• Helps reduce vibration and noise from a loose mount
• Common symptoms: broken or missing bracket, bent metal, sagging/misaligned component, difficulty fastening parts

• Disconnect power before service; shut off water supply if applicable
• Note orientation and fastener locations; transfer existing screws/clips if needed
• Support the component while removing/installing the bracket to prevent strain
• Tighten fasteners evenly; avoid overtightening to prevent damage

The LP Cnvrsn-Kit is an OEM part compatible with Whirlpool ranges. It allows a range to use liquid propane gas instead of natural gas. The kit includes all necessary components to safely convert the range.

Symptoms of a bad conversion kit include:

• Gas leaks around pipe connections 
• Unable to light burners or ovens due to issues with gas flow
• Changes in flame color or uneven cooking performance

Causes of a bad conversion kit can include damaged or worn-out components that no longer regulate gas pressure properly or provide a secure connection. 

This replacement kit is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.

The Trim Vent is an OEM component specifically designed for Whirlpool ranges. Located at the rear of the unit above the oven cavity, the trim vent serves an important safety and ventilation purpose. 

Constructed of heat-resistant sheet metal with a powder-coated finish, the trim vent features an internal baffle system and a rear-mounted exhaust fan. This facilitates the proper drawing of hot oven air and fumes up and out of the kitchen area. 

This exhaust vent meets all codes regarding flame barrier rating and venting performance. It attaches securely to the framework at the top and back edges. 

Symptoms of a bad trim-vent include:

• Excessive heat and smoke escaping during use  
• Grease or residue buildup inside the vent pathway
• Misaligned vent body not flush or securely seated 

This OEM part fits KitchenAid, Jenn-Air, Amana and select GE range models.

This oven rack replaces a worn, bent or missing shelf inside the oven cavity so cookware sits level and slides in and out smoothly. It restores proper support for baking sheets, pans and cookware for even cooking results. What it does:

• Provides a sturdy shelf for bakeware, pans and roasting cookware
• Keeps cookware level to promote even browning and consistent results
• Replaces warped, bent or damaged racks that won't slide or stay in position
• Helps prevent cookware from tipping or sliding during use

• Install by sliding rack into the desired oven track; no tools typically required
• Allow the oven to cool completely and disconnect power before handling
• Inspect oven track rollers and guides for damage; replace those parts separately if needed
• Handle with care to avoid pinching; racks may have sharp edges

The Grate-Kit is an OEM component specifically designed for Whirlpool electric ranges. It includes the cooking grates and necessary mounting hardware to outfit one or more oven racks. 

Symptoms of worn or damaged grates include: 

• Uneven cooking from hot and cold spots on the grates  
• Foods sticking or burning more easily due to surface deterioration
• Warping, cracking, or breakage of grate wires from high-heat use
• Loose or missing fasteners cause unsafe support of cookware

Causes can be accumulated years of cooking on the grates. Exposure to high temperatures, grease splatters, and occasional mishandling also contribute to normal wear over time.

This OEM Whirlpool part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.

This orifice controls the flow of gas to a burner, helping produce the correct flame for safe, consistent cooking and baking. It replaces a worn or damaged gas metering jet to restore proper burner performance. What it does:

• Meter gas flow to a specific burner for correct flame size and heat output
• Helps maintain steady ignition and even cooking when functioning properly
• Commonly used when a burner shows a weak, uneven, or no flame
• Also replaces corroded or clogged jets that restrict gas flow

• Turn off the gas supply and power to the appliance before beginning work
• Use appropriate tools and avoid overtightening; match the replacement to the original part number
• Inspect for debris or corrosion and clean mating surfaces before installation

This door hinge secures and guides the active refrigerator door so it opens and closes smoothly while maintaining proper alignment. Durable replacement hinge restores correct door movement and helps prevent sagging or misalignment. What it does:

• Provides the pivot point and structural support for the active refrigerator door
• Keeps the door aligned for a proper seal and even gaps
• Commonly replaces hinges that cause door sagging, rubbing, or difficulty closing
• Works with the door assembly hardware to maintain smooth operation

• Disconnect power to the appliance and remove food/items from the door before starting.
• Support the door while removing and installing the hinge to prevent injury or damage.
• Reuse original mounting screws; tighten securely but avoid overtightening.
• After installation, check door alignment and adjust as needed for a proper seal.

This stainless-steel trim assembly restores the finished look and protective edge of the appliance fascia. It replaces a damaged, dented, or missing trim piece to help seal and finish the control/vent opening. What it does

• Replaces worn, dented, or scratched trim to restore appliance appearance
• Covers and protects the edge of the fascia or opening from dirt and damage
• Helps keep the control/vent area sealed and neat-looking
• Stops rattles or gaps caused by a loose or missing trim piece

• One stainless-steel trim assembly

• Disconnect power to the appliance before starting any work
• Basic hand tools typically required; remove adjacent panels or fasteners to access the trim
• Handle stainless trim carefully to avoid scratches; use a soft cloth when positioning

This saddle-style gas valve controls gas flow to the appliance, letting technicians create a safe, serviceable gas connection. It's used where a saddle/tap-style inlet is required for supplying natural gas to the unit. What it does:

• Provides a saddle-mounted gas shutoff and inlet for an appliance connection
• Restores gas flow when a damaged or leaking saddle valve prevents operation
• Commonly used when a service replacement or rework of the appliance gas inlet is needed
• Helps isolate the appliance gas supply for repair or maintenance

• Turn off the home gas supply and relieve downstream pressure before starting work
• Installation must follow OEM instructions and local codes; use appropriate fittings and sealants for gas service
• Check all connections for leaks with a gas-safe leak detector or soapy-water test after installation

This replacement grate kit restores a stable, level surface for gas cooktop cookware and improves burner access and heat distribution. Designed to replace worn, cracked or misshapen grates so pots and pans sit securely. What it does:

• Replaces damaged or warped cooktop grates so cookware rests evenly
• Restores proper spacing and support for burners and cookware
• Helps maintain consistent flame exposure at each burner
• Reduces rocking, slipping, and uneven heating caused by damaged grates

• For safety, shut off the gas supply and allow the cooktop to cool completely before beginning.
• Lift out old grates and set the new grates into position — no tools typically required.
• Inspect burner caps and heads for proper placement before testing burners.

This surface burner head replaces a damaged or worn gas range burner element to restore proper flame pattern and even cooking. It fits into the cooktop assembly and directs gas to the burner ports for consistent heat. What it does:

• Directs and shapes the burner flame for even heating across pots and pans
• Replaces warped, cracked, or clogged burner heads that cause uneven or weak flames
• Helps correct symptoms like sizzling, yellow-tipped flames, sputtering, or burners that light poorly
• Works with the burner cap and base to restore proper ignition and flame stability

• Turn off the appliance and allow all components to cool before servicing; shut off gas supply or disconnect gas/electric per your appliance manual
• Remove grates and burner caps, lift out the old burner head, and seat the new head flat on the burner base; avoid forcing or bending components
• Inspect surrounding parts (cap, igniter, burner base) for damage or buildup and clean as needed to ensure proper function

This Holder ORF retainer secures a small appliance component in place to keep moving parts aligned and reduce noise or misfeeds. It's a simple replacement that restores proper component positioning and stable operation. What it does:

• Secures and centers the associated component so it stays in the correct position during use
• Prevents rattling, shifting, or intermittent contact caused by a loose or broken retainer
• Helps restore consistent operation when an associated part is misaligned or falls out of place
• Works as the mounting/holding point designed for the OEM component it matches

• One Holder ORF retainer

• Disconnect power (and water, if appliance type requires) before replacing the part
• Replace using basic hand tools; avoid forcing or prying plastic parts to prevent breakage
• Inspect adjacent clips and fasteners and replace if damaged to ensure a secure fit