6656961992 Parts

This vent grill covers the appliance vent opening to direct exhaust airflow and protect internal components. Replacing a damaged or missing vent grille restores proper ventilation and improves the unit's appearance. What it does:

• Directs hot air and exhaust from the oven/range cavity to the external vent path.
• Shields internal parts from large debris, grease buildup and accidental contact.
• Commonly replaced when cracked, warped, loose, broken, or cosmetically worn.
• Helps maintain consistent airflow to reduce heat buildup behind the control area.

• Disconnect power (and gas if applicable) before beginning any service.
• Typically secures with screws or snap clips; a screwdriver may be required for removal and installation.
• Handle edges carefully—metal parts may be sharp.
• Replace fasteners before reassembly.

This mounting bracket secures a designated component to the appliance frame, keeping it properly positioned and stable. Replacing a bent or broken bracket restores support and helps eliminate looseness, vibration, and misalignment during operation.

• Anchors the specified part to the chassis or panel
• Maintains proper alignment and clearances for reliable performance
• Helps prevent vibration, rattling, or shifting during use
• Common signs of failure: bent or cracked bracket, loose or misaligned components, new rattling noises

• Disconnect power and allow any hot surfaces to cool before servicing
• Note the original bracket's orientation and fastener locations for accurate reinstallation
• Transfer and tighten existing hardware securely without overtightening
• After installation, verify the supported part is secure and properly aligned

This replacement screw secures appliance panels, brackets, or internal components to keep them tight and aligned. Replace a missing, stripped, or damaged fastener to restore a solid, rattle-free fit and reliable operation.

• Fastens parts to the cabinet or frame to prevent movement
• Replaces missing, stripped, or corroded hardware that can cause looseness, vibration, or noise
• Helps correct gaps or misalignment after service
• Maintains proper support for covers, trims, or brackets

• Disconnect power; shut off gas/water if applicable before servicing
• Match screw length and location to the original position
• Start threads by hand to avoid cross-threading; tighten snugly without overtightening
• Repair or replace damaged clips/inserts before installing the new screw

This replacement screw secures appliance components and panels in their proper position. Replacing worn, stripped, or missing hardware restores a tight fit, reduces vibration or rattles, and helps maintain safe, reliable operation per the manufacturer's design. What it does:

• Fastens panels, brackets, or assemblies where specified in the model's parts diagram
• Replaces missing, rusted, or stripped hardware
• Helps eliminate looseness, rattling, or vibration
• Restores secure alignment of mounted components

• 1 screw

• Disconnect power and shut off water/gas before servicing.
• Verify the exact location in your model's parts diagram and replace screws one at a time to maintain alignment.
• Use the correct driver/bit; start threads by hand to avoid cross-threading and do not overtighten.
• Inspect mating holes/clips for damage; repair or replace related hardware if threads are compromised.

This replacement door frame restores the front trim and structural support for a damaged or worn appliance door, improving appearance and alignment so the door closes correctly and looks finished. What it does:

• Replaces cracked, bent, or cosmetically damaged door frame trim
• Restores proper door alignment and mounting surface for the door assembly
• Helps prevent gaps or misalignment that can affect closure or appearance
• Matches factory design to integrate with the existing door components

• Disconnect power (and gas if applicable) and follow the manufacturer's service instructions before starting.
• Remove the door or door assembly per OEM instructions to access mounting screws and clips.
• Handle any door glass and trim carefully—support heavy panels and wear safety gloves/eye protection.
• Use manufacturer torque guidelines if provided.

Replacement refrigerator water filter cartridges that help improve the taste and clarity of drinking water and ice by reducing common contaminants that affect flavor and odor. Three cartridges keep fresh filters on hand for timely replacement. What it does:

• Removes common particles and impurities that can cause cloudy ice or off-tasting water
• Helps reduce chlorine taste and odor for better-tasting drinking water and ice
• Supports steady filtered water flow when installed and maintained per manufacturer guidance
• Restores water quality symptoms often linked to aging or saturated filters

• Replace using your refrigerator's owner manual instructions; ensure proper alignment and seating to prevent leaks
• Flush per the refrigerator maker's directions after installation to remove air and loose carbon fines
• Check O-rings or seals and replace if damaged before installing a new cartridge

This genuine Whirlpool door handle provides a secure grip for opening and closing your refrigerator door, restoring proper function and appearance. It replaces a cracked, broken, loose, or worn handle to improve everyday use. What it does:

• Replaces a damaged or worn refrigerator door handle to restore a solid grip.
• Prevents further cracking or separation that can catch on clothing or hands.
• Helps the door open and close smoothly when fastened correctly.
• Reduces wobble or looseness that may occur from stripped or missing fasteners.

• One refrigerator door handle

• High-level replacement — follow your refrigerator's service manual for specific fastener locations and procedures.
• Remove food and door-mounted items as needed; support the door during removal and reinstallation.
• Use appropriate hand tools; avoid overtightening fasteners to prevent handle damage.

Screw that secures appliance panels and components to restore proper fit and reduce movement. Use this direct-replacement fastener to swap out stripped, missing, or damaged screws that cause loose panels or rattling. What it does:

• Secures panels, trim, brackets, and internal components to maintain alignment and prevent vibration.
• Replaces stripped, corroded, bent, or missing screws that can cause rattling, gaps, or loose parts.
• Restores proper fit and function of assemblies when original fasteners fail.
• Small part — confirm size and thread match your appliance before ordering.

• Disconnect power (and water, if applicable) before starting any repair.
• Use the correct screwdriver or bit; avoid overtightening to prevent stripping or cracking.
• Replace all like fasteners in the same area if multiple are damaged to ensure even fit and alignment.

A replacement mounting screw used to secure appliance panels and components. This OEM-style screw helps restore proper fit and reduces rattling or loose parts for a finished, secure assembly. What it does:

• Fastens control panels, brackets, or interior trim to the appliance frame
• Restores proper alignment when an original screw is missing or stripped
• Stops rattling or vibration caused by loose fasteners
• Matches OEM fit for reliable fastening when the correct screw is used

• Turn power off at the breaker before servicing electrical appliances
• Match screw length, head style and thread to the removed fastener before installation
• Use the correct screwdriver or bit to avoid cam-out or head damage
• Do not overtighten; snug until secure to avoid stripping threads or cracking components

Replacement interlock spring that provides tension for the appliance door latch so the door closes and the interlock switch can engage for normal operation. Restores reliable door engagement and latch return in compatible Whirlpool appliances. What it does:

• Provides tension to the door latch/interlock assembly so the door stays securely closed during use.
• Ensures the latch returns to the closed position and allows the interlock switch to complete the appliance's safety circuit.
• Helps resolve symptoms such as a loose or non-returning latch, door that won't stay closed, or cycles that stop because the door won't engage.
• Works as a direct replacement for the listed interlock spring in compatible Whirlpool assemblies.

• Disconnect power to the appliance before servicing to avoid electric shock or injury.
• Basic hand tools are typically required; panels or the door may need partial disassembly—refer to the model's service guide.
• Inspect the latch, striker, and interlock switch for wear or damage and replace if needed; improper installation can prevent correct engagement.

Single Charcoal Filter

This is a replacement screw used to secure appliance parts and panels. It restores proper fastening where the original screw is missing, stripped, or corroded. What it does:

• Secures panels, brackets, or components in place to maintain appliance alignment
• Replaces lost, damaged, or rusted fasteners for a reliable hold
• Helps prevent rattling or movement caused by a missing screw
• Works wherever the OEM screw specification and fit match

• One screw

• Use the matching screwdriver or driver bit; avoid overtightening to prevent stripping
• Disconnect power and follow appliance safety precautions before servicing