76941262610 Parts

This replacement part is a transmission kit. This is a genuine replacement part made by MTD. This kit is used to assist the transmission and allow it to work properly while the engine is in use. A new transmission kit might be needed if the engine is no longer starting as efficiently as before. This can be due to a worn down transmission and should be replaced as soon as possible. The transmission is a frequently used part in a machine and can easily become damaged after years of normal use. Be sure the engine is cooled off and shut down before attempting to replace this part. This is a genuine OEM replacement part. This part is sold individually and is sourced directly from the manufacturer.

This OEM idle mandrel pulley kit includes the pulley, spacer/washer, and a bushing. This idle mandrel pulley spins the blade on a lawnmower deck of a tractor mower.A new idle mandrel pulley kit will be needed if the bearing for this pulley is damaged, broken, or lost because the bearing is not available by itself. If the bearing inside of the pulley is not spinning freely as it should, then the entire idle mandrel pulley kit will be needed to repair this machine. Remember to wear gloves when operating or performing care and maintenance on any outdoor power equipment machines.This genuine MTD part is sourced directly from the manufacturer and sold individually. The idle mandrel pulley kit is compatible with lawn tractors manufactured by MTD, Yard Machines, Bolens, Yard-Man, Troy-Bilt, Poulan, Cub Cadet, Husky, and Murray.

This part is a replacement engine pulley. This is a genuine OEM part made by MTD and has been sourced directly from the manufacturer. If the current engine pulley is broken or in any way damaged, this part can be used as a replacement. It is intended for use with lawn tractor models.The engine pulley enables the user to power on and use the lawn tractor by driving the equipment's transmission belt. This part attaches to the engine crankshaft and can become worn, corroded, jammed, or otherwise become defective. In this case, the engine pulley will need to be replaced. When working on or near an engine, always ensure that the equipment is powered off and completely cooled down before attempting to undergo any repairs. For more accurate information on how and where to install this engine pulley, the appropriate owner's manual and equipment diagrams should be referred to. This engine pulley is suitable for use on a variety of lawn tractor models manufactured by Craftsman, MTD, Troy-Bilt, and Cub Cadet. It is a genuine OEM part and thus is made of high-quality, durable metal. Part sold individually.

This replacement part is a deck pulley. This is a genuine replacement part made by MTD. This type of pulley typically connects multiple parts together so they can operate properly when the engine is powered on. This ensures the parts are able to run smoothly during use. A new deck pulley might be needed if the current one has become worn down over time. A pulley will experience a great deal of friction with use. This can then cause it to malfunction and no longer work properly. If the user notices unusual noises coming from inside of the appliance, it can be due to a pulley that has moved out of place. This is a genuine OEM replacement part. This part is sold individually and is sourced directly from the manufacturer.

The roller cable guide is designed for use with lawnmowers. It supports and guides cables to the lasher in the mower.This roller cable guide is a genuine OEM part sourced directly from the manufacturer and is sold individually. This roller cable guide is compatible with the following brands: Craftsman, Cub Cadet, Ryobi, Troy-Bilt, Yard Machines, MTD, Huskee, Montgomery Wards, Bolens, and Yard-Man.

This is a deck pulley that can work as a replacement for a range of lawn tractors. The pulley is used to help spin the blades on the tractor's mower deck. If the pulley has been damaged or is broken, the blades will not spin, which means the tractor can't cut the lawn. This will significantly reduce the functionality of the tractor.The deck pulley tends to be durable, but it could need to be replaced at some point. It might break, or it might become stripped. This could cause the belt to snap eventually. Replacing the part is essential. An impact driver and a 7/8 socket are needed to complete this project. Wait for the tractor to cool before starting a repair.This deck pulley can work with select models of lawn tractors from MTD, Troy-Bilt, Yard-Man, Yard Machines, and Bolens. The pulley is sold individually. This is an authentic OEM replacement deck pulley that has been sourced from the manufacturer.

This genuine replacement part is a deck lift arm. The deck lift arm is the metal bracket that secures the mower deck to the lawnmower. If the mower deck is no longer being held up properly, and the grass is not being cut evenly due to the deck dragging on the ground, the deck lift arm will need to be replaced. Luckily, replacing this part is a fairly simple repair.To replace the deck lift arm, locate the bolts that attach it to the mower deck. Unfasten the bolts and remove the old lift arm. Place the new lift arm in its proper position and fasten the bolts that secure it to the mower deck.Power the mower and do a test trial to make sure everything is still functioning properly. If everything is normal, the installation was a success.This OEM replacement part is sold individually and is compatible with MTD brand lawnmowers.

This replacement part is a deck lift arm and is intended for use in different types of lawn equipment. This is a genuine replacement part made by MTD. This deck lift arm is found in many types of lawn mowers and helps the user adjust the deck in many appliances. A new deck lift arm might be needed if the user notices that the current one is not working properly. It is not unusual for these parts to need replacing as they can become damaged or jammed after normal wear and tear. Be sure to wear work gloves when attempting to replace this part as injury can occur. Reference the specific user manual for more information on how to replace this part. This deck lift arm is a genuine OEM replacement part and sourced directly from the manufacturer. This specific deck lift arm is sold as a single piece and is made of durable metal.

This is a replacement deck belt cover. This is a genuine OEM part made by MTD and has been sourced directly from the manufacturer. This part can be used to replace a damaged or faulty deck belt cover on a variety of lawn equipment. The deck belt cover is used to protect the deck belt from damage or unnecessary wear and tear that may occur if the part is not covered. Without a cover, the deck belt may break and prevent the equipment from functioning. When working on or near to an engine, ensure the equipment is powered off and completely cooled down before starting any repairs. Access to proper tools is required to install this part. It is always recommended that the appropriate safety precautions are adhered to when attempting to fix any power tools or machinery. For more accurate information on how and where to install this deck belt cover, the appropriate owner's manual and included diagrams should be referenced.As an authentic replacement part, this deck belt cover is suitable for use on several different lawnmower models and lawn tractors manufactured by MTD and Troy-Bilt. This is a genuine part made of high-quality, durable materials and is sold individually.

This is a chute crank bracket for a snow blower. The bracket holds and positions the chute in the proper direction so that snow is thrown at the desired angle. This is a genuine OEM part and is sold individually. This part is compatible with several brands, including Craftsman, Huskee, Ryobi, Troy-Bilt, Yard Machines, and Yard Man.If the crank bracket is rusted, damaged, or bent, it can affect the efficiency of the snow blower and throw the snow in the wrong direction or clog the chute. Replacing the bracket is fairly simple and will help the snow to be thrown efficiently and without clogging. For proper placement of the chute, remove it from the bracket and be sure that it moves easily. When attached, if the teeth do not mesh correctly, the bracket will need to be readjusted or replaced. This is easily done by loosening the bolts and moving the bracket until the teeth mesh. This will allow the chute to turn correctly. If the teeth will still not mesh, detach the chute and then remove the bad bracket and install the new bracket.

Slide shoes, otherwise known as skid shoes, are attached to a snowblower to help protect the concrete it moves over. The slide shoe also helps to protect the underside of the snowblower. They are composed of metal and are attached to the bottom of the machine. With use, the slide shoes may wear down. They can also become defective from accidents while operating the snow throwing machine. When the slide shoes are not working correctly, there can be irreversible damage done to both the snowblower and the concrete. Replacement slide shoes can easily be attached to the bottom of a snowblower. Be sure to allow the machine to cool down completely. It's recommended to set the snowblower on top of a piece of cardboard. Remove the old shoes and install the new ones, tightening all nuts and washers while the skid shoe is flat on the ground.This is a manufacturer supplied OEM MTD snowblower slide shoe. Each shoe is sold separately. The slide shoe is made of high-quality, durable black steel. It is suggested to replace both shoes simultaneously to ensure an even and consistent path for the MTD snowblower.