912919 Parts

This is a replacement power cord that restores electrical connection between your appliance and the household outlet, letting the appliance receive mains power safely. It replaces a damaged or worn cord to help restore normal operation. What it does:

• Carries mains voltage from the wall outlet to the appliance so it can power up and operate
• Replaces frayed, melted, or broken cords that can cause intermittent power or no power at all
• Helps eliminate arcing or loose connection symptoms that may trip breakers or cause burning smells
• Restores a secure, strain-relieved connection when the original cord or terminal is damaged

• One replacement power cord

• Always disconnect power at the breaker or unplug the appliance before replacing the cord
• Route the cord and secure the strain relief or clamp per the appliance's wiring access panel

This air cleaner gasket is a genuine replacement that is designed for select models of 3-5 HP small engines from Briggs & Stratton. The air cleaner gasket is designed to fit between the air cleaner and the carburetor assembly. This helps to create a seal between the two components and ensure that air does not leak out of the engine to provide the appropriate pressure. Gaskets are exposed to a lot of heat and pressure, along with constant vibrations, which can cause them to become frail or brittle over time. Replacing them is usually considered a part of routine maintenance and OEM parts should always be used. This genuine OEM air cleaner gasket is manufactured to exact standards and can be used on select engines from Briggs & Stratton and Toro. The engines are typically found on equipment like blowers, lawn mowers, generators, and other small lawn and garden machines. This gasket is sold as a single unit and does not include additional components or hardware. To replace the gasket, be sure to have the appropriate tools and a cool engine for best results. Never perform work when the engine is hot and always wear gloves to protect the hands.

This air cleaner gasket is made of durable composite material. The main purpose of the gasket is to create an airtight seal for the air cleaner assembly. However, as time goes on, the material can start to wear out and deteriorate and will need to be replaced to ensure the best performance from the outdoor power tool. If the air cleaner gasket is cracked or worn out, replacing it starts with moving the equipment to a stable surface and disconnecting the spark plug wire. Use a screwdriver to remove the top of the air cleaner cover, the filter, and then the bottom half of the cover. Pry out the old air cleaner gasket before installing the new part. Reattach the bottom of the cover, replace the filter, and screw down the top half of the cleaner.This is an authentic OEM replacement part that is sourced directly from the manufacturer. It is sold as an individual component. The air cleaner gasket is made for use with lawnmowers, tillers, pressure washers, generators, and wood chippers manufactured by Simplicity, Toro, Craftsman, and Briggs & Stratton.

The intake gasket on a carburetor serves an important function. It ensures there is no additional air getting into the carburetor. If a gasket on a carburetor is not working properly, it could allow for extra air and dirt to get in, which might cause engine performance issues.Over time, the gaskets will need to be replaced. They can dry, crack, and break over time. It is not a matter of whether they should be replaced, but when. Ideally, gaskets should be replaced whenever the carburetor is serviced. Check on the gaskets occasionally to ensure they are in good condition.This intake gasket is used on a wide range of lawn and garden machines including mowers, tillers, leaf blowers, generators, and wood chippers. This gasket is compatible with select models from Midwest Engine, Briggs & Stratton, Craftsman, Toro, and Simplicity. It is sold individually and is a genuine OEM replacement sourced from the manufacturer.

This genuine replacement breather gasket is designed specifically for use with select Briggs & Stratton engines found on lawn and garden equipment. The breather gasket is located in the breather assembly and designed to create an airtight seal. This gasket is subject to compression and high temperatures, which can cause deterioration over time. If the gasket becomes warped, deteriorated, or otherwise damaged, it will affect the seal and the engine performance. Gaskets are often considered a part of routine maintenance and should be inspected regularly for signs of damage. Replace worn gaskets immediately for optimal engine operation. This genuine OEM breather gasket is compatible with Briggs & Stratton and Toro machines that use engines that take this part. There are hundreds of models that use this gasket, including generators, blowers, and other small engines. This is made of composite materials and sold as a single unit. The gasket does not include any additional components or hardware. Always wear gloves and allow the engine to cool before performing any kind of repairs. Be sure to use the appropriate tools and replace gaskets gently to avoid damaging them in the replacement process.

This genuine OEM replacement part is a spark plug terminal for a wide variety of small combustion engines. In a combustion engine, the spark plug generates a small electrical charge that creates enough power to start up the ignition and engage combustion. The plug connects to the ignition through the terminal. Spark plugs generate and then pass a small electrical current through to the ignition. Usually, the main issue with spark plugs is that this current hyper-extends and ends up frying the spark plug. However, if the terminal is damaged, the charge will not pass into the ignitor, and the engine will not turn. If the spark plug can carry a charge but the engine still won't turn, it's likely the terminal that needs replacing. This is an easy repair because the terminal should just snap on and off. If stuck, a pair of needle-nose pliers should make it easier. This high-quality replacement part is compatible with engines from Murray, Toro, Lawn Boy, and Briggs & Stratton. It is sourced from the original manufacturer and ships individually.

This replacement choke shaft is an authentic OEM part for over 150 different appliance engines. The choke shaft is essentially a lever used to control the choke. When the choke is engaged, it controls how much air is released from the intake valve into the carburetor. With less air in the carburetor, the engine will burn less fuel and create less power. The choke shaft extends out from the engine, allowing operators to engage the choke. While useful, this does, however, mean that it is exposed to the elements and physical damage. If broken off, the choke will be unusable and the shaft will need replacing. To do so, use a socket wrench to disassemble the air filter and filter housing, and a pair of pliers to pull out the choke plate. Remove the damaged shaft by hand and reassemble with a new part. As a high-quality replacement part, this choke shaft comes sourced from its original manufacturer. It is compatible with engines made by Toro and Briggs & Stratton. This part includes a shaft, choke plate, and O-ring. This parts ship as a single unit.

This is a quality recoil starter assembly that is used in lawnmower and edger engines. The recoil starter makes it easier for a user to pull start the tool. The recoil starter assembly includes all needed parts, including the starter pulley, the plastic housing, the grip, the starter spring, and the pull rope. All additional hardware is also included.Over time, the components inside a recoil starter assembly can start to fail or wear out and will need to be replaced. To replace this part, first turn off the lawnmower or edger and remove the spark plug wire. The recoil starter cover can then be removed from the motor. Remove the full recoil starter assembly and then attach the new recoil starter to the cover using the included hardware. Replace the other components and test the starter and motor before running the equipment.This is an authentic OEM replacement part directly sourced from the manufacturer. It is sold as a single component. The recoil starter assembly is designed for use with lawnmowers and edgers manufactured by Cub Cadet and Briggs & Stratton.

The spark plug boot is a rubber piece that is responsible for connecting the spark plug to the spark plug wires and completing the connection. Spark plugs are necessary to create the engine spark that will start the motor in lawn equipment and other small engines. The boot holds the terminal and keeps everything protected from the elements and insulated so that it continues to work correctly. If the spark plug connection seems weak or if the existing boot is damaged, this replacement could provide the solution. This durable rubber boot will insulate the spark plugs and help any small engine run better. This spark plug boot replacement can be used with a number of Briggs & Stratton engines and is compatible with hundreds of different machines from Toro, Lawn-Boy, and Briggs & Stratton. This boot replacement is sold individually as a single piece and does not include the terminal or any other housing or materials.

This replacement part is a screw. It is a genuine replacement part made by Midwest Engine. Screws are found in many different types of appliances and machines. These parts are important in holding different pieces together so that the user is able to operate the appliance effectively. A replacement screw might be needed if some parts of the appliances are loose or missing. Screws can become stripped over time. If this is the case it is recommended that they be replaced as soon as possible. The repair for this screw is simple and will most likely require a screwdriver and perhaps pliers if the previous part is lodged in place. This screw is made of durable metal. This part is sold individually and is sourced directly from the manufacturer to ensure proper fit. This is a genuine OEM replacement part.

This is a replacement spring cap that will ensure the spring retains the correct position between the spring and the diaphragm. It is sometimes called a carburetor diaphragm spring cap. If there is an issue with the spring cap, it could cause issues with the placement of the spring, along with carburetor problems. The engine may not run properly, and it could be more difficult to start. Owners should check the spring cap if they notice issues with their engine, as well as during maintenance check-ups. In some cases, the spring cap could become corroded or broken, and getting a replacement becomes essential. The spring cap is a genuine OEM replacement part for small engines including lawn mowers, tillers, leaf blowers, generators, chippers, and log splitters. The cap is compatible with a range of brands including Craftsman, Toro, Briggs & Stratton, Cub Cadet, Lawn-Boy, and Simplicity.

This is a replacement screw that can be used on various types of lawn and garden equipment. The type of equipment will affect where the screw is used on the tool. A screw is used to attach various components together so nothing comes loose while the tool is in use. It can also be used with a nut. It's best to choose a nut that has the same finish and threading as the screw.A screw can be damaged in many ways. If this occurs, it will need to be replaced. Corrosion, wear and tear, extreme stress, and high temperatures can all cause a screw to fail. Inspecting the screw can indicate whether it will need to be replaced. Use a screwdriver to take off the old screw, or use a pair of pliers if the screw has become stripped. Replace it with a new screw.This is an authentic OEM replacement part sourced directly from the manufacturer. Each screw is sold individually. The component is designed for use with lawn mowers, snowblowers, tillers, pressure washers, leaf blowers, edgers, chainsaws, generators, and wood chippers manufactured by Briggs & Stratton, Simplicity, Toro, MTD, Cub Cadet, Lawn-Boy, Homelite, and Murray.

This screw, manufactured by Briggs & Stratton, has multiple uses in small and medium sized gasoline powered engines, including generators, leaf blowers, lawn mowers, log splitters, chippers, tillers, pressure washers, and vacuums. Bolts of this design are used to secure engines and accessories to the body of the power tool. Manufactured with a smooth nozzle, these bolts are capable of withstanding four times the resistance of a regular hex bolt. For this reason, they are often used to secure the housing of moving parts, such as the cylinder head. Periodically, the wear and tear experienced by any engine will result in interior pieces needing to be replaced. In such cases it always a good idea to also replace the hardware that secures the various parts of the device together. Flange bolts and nuts should be replaced with genuine OEM parts such as this one, which is manufactured to meet the same specifications as the original. Occasionally, the high heat of the engine, coupled with extensive use, can cause a hex bolt such as this to freeze up. In such a case, a machinist is necessary to drill out the original bolt and retap the hole so the bolt can be used. This screw is compatible with equipment manufactured by Briggs & Stratton, Simplicity, MTD, Craftsman, Lawn Boy, Toro, Cub Cadet, and Murray.

This is a replacement screw to secure the pawl friction plate used in many types of lawn and garden equipment. The part is also sometimes called a flange bolt. It is identical to the original screw that came with the machine and will replace a lost or damaged screw. The screws could become damaged due to corrosion or an incident that causes the screw to bend or break. They also serve as replacements in case the screw was lost. Replacing the screw is a simple repair to make. This is an authentic OEM replacement screw that is sold individually. Some buyers might want to have an extra screw on hand. The replacement screw for the pawl friction plate can be used on lawn mowers, snowblowers, tillers, pressure washers, generators, edgers, log splitters, wood chippers, and other small engines. Compatible brands include Briggs & Stratton, Craftsman, Toro, Cub Cadet, Lawn-Boy, Snapper, MTD, and Simplicity.