9445Jt1 Parts

This air filter is a part of the air cleaning system on select lawn and garden engines. Combustion engines take in air and that is mixed with the fuel in the carburetor and then sent to the engine. The air filter is designed to catch particles and debris that come into the engine so that the air getting through is clean and pure. The filters naturally become clogged with regular use so replacing them is a part of routine maintenance that should be done every six to 12 months, depending on frequency of use. In some cases, the filter may become clogged in between maintenance, which would require an additional replacement. It may be helpful to keep an extra filter on hand. This OEM air filter is manufactured by Poulan to exact standards. It fits a variety of Poulan machines, as well as those from Weed Eater, AYP, and Husqvarna. It is used in various models of pruners and trimmers and does not require any tools for replacement. The air filter is made of durable foam material and designed to catch fine particles to ensure the cleanest air enters the engine. It is sold individually.

This replacement part is a throttle cable assembly. This is a genuine replacement part made by Husqvarna. This cable is used to connect the throttle to the user area so that the operator is able to control certain settings during use. A new throttle cable assembly might be needed if the user is unable to control the throttle. The wires in the throttle cable can become stripped or worn down. If this is the case, it is recommended that it be replaced right away. Be sure that the engine is turned off before working with wires and other objects connected to the engine. This throttle cable assembly is also sold individually and is sourced directly from the manufacturer. This part is a genuine OEM replacement part to ensure proper fit and long-lasting use.

This vacuum tube is an authentic OEM replacement part that is sourced directly from the manufacturer and is used on blowers for vacuuming leaves and debris. It is used to transform the blower into a vacuum when leaves need to be removed. It is a plastic part that can be damaged due to heavy use or the outside elements. This part is an accessory that does not require tools to install. In autumn, it can be hard to keep up with removing leaves with a rake and manual work. Using a blower with a vacuum tube makes it easier and creates mulch that can be used in compost bins. The vacuum tube is easy to misplace and should be labeled and stored with lawn and garden tools so that it is readily available in the fall. The tube should be inspected before use so that it can be replaced if it has cracks in it which can cause it to lose suction power.This vacuum tube is made of black molded plastic and is sold as an individual unit. The vacuum tube is designed to be used on blowers manufactured by Husqvarna and Poulan.

This carburetor adapter attaches to the gasket on some kinds of lawn equipment with small engines. It is made of a durable plastic material, but wear and tear or impact can cause the part to become damaged. If the part is damaged or broken, the carburetor adapter will need to be replaced with a new component.A visual inspection can determine whether the carburetor adapter should be replaced. The fuel lines and throttle linkage will first need to be removed. Next, the bolts on the carburetor should be taken out so the carburetor can be removed. Take the bolts out of the carburetor plate and remove it. This will give access to the carburetor adapter so it can be determined whether it needs to be replaced. Simply install the new part before reassembling the machine so it can be used again.This replacement carburetor adapter is designed for use with string trimmers and pole pruners manufactured by Craftsman, Poulan, Poulan Pro, and Weed Eater. It is a genuine OEM part that is directly sourced from the manufacturer. This part is sold as an individual component.

This is a shield bracket for use with line trimmers. The bracket is used to help hold and support the debris shield to the trimmer shaft. If this piece is broken or not working properly, it means that the deflector will not be attached correctly, and the debris will not go where it should. Owners who find that the shield bracket has an issue will want to replace it as soon as possible.The shield bracket is made from durable metal, but it could still become damaged or corroded over time. If there is damage, the owners can make the simple replacement on their own. It is important that they remove the spark plug wire before making the installation, though. They should also wear gloves to keep their hands safe.The shield bracket is compatible with select models of line trimmers from Husqvarna, Weed Eater, Poulan, and Jonsered. The piece is sold individually. It is a genuine OEM replacement part that has been sourced directly from the manufacturer.

This is a carburetor adapter. If this part is broken or deteriorated the carburetor may not function as efficiently, potentially causing the engine to misfire or reducing engine performance. In an internal combustion engine the carburetor is responsible for sending a combination of fuel and air to the motor for ignition. This carburetor adapter fits between the cylinder and carburetor to improve the functionality of the carburetor and, ultimately, the performance of the engine. This part is manufactured from high-quality and durable plastic. This carburetor adapter is a genuine OEM replacement part that has been sourced directly from the manufacturer. This carburetor adapter fits various different models of Husqvarna, WeedEater, and Poulan blowers, trimmers, and hedge trimmers. Please note this part is sold individually.

This is a trimmer throttle cable assembly meant to be compatible with trimmers from several top brands. The throttle cable is the part that connects the throttle trigger and the carburetor. It can allow the user to provide power to the machine by regulating the carburetor airflow. If the cable has a problem, users will not be able to control the throttle properly or at all in some cases.The throttle cable could become damaged and need to be replaced. There are connections on each end of the cable that could be damaged or broken. The cable might also kink, which could cause it to break. Owners can replace the cable and extend the life of the trimmer. Tools commonly used for replacement include a hex key, Torx screwdriver, or a screwdriver depending on the model.The throttle cable assembly works with certain models of trimmer from Husqvarna, Weed Eater, and Poulan. The cable is sold individually. This is an authentic OEM replacement that has been sourced from the manufacturer.

The handle assist is the handle that is held to steer and control the machine during the trimming process. As the primary touchpoint, the handle has to provide enough comfort while assisting with the machine's function. This handle is designed to be gloves-friendly with a surface rough enough to provide security against slip. Use this as a replacement for a broken, loose, or worn handle. Remember always to hold the handle firmly while operating. This part is designed for use on trimmers or weed cutters made by Craftsman, Weed Eater, Poulan, or Poulan Pro. This is a genuine OEM replacement handle that will provide extra control and less hand fatigue. It is sold individually.

This is a replacement purge bulb. This is a genuine OEM part made by Husqvarna and has been sourced directly from the manufacturer. This part is intended to replace a broken or defective purge bulb on various models of outdoor power equipment. The purge bulb purges air from the carburetor and draws in fuel from the fuel tank to allow the engine to start. Over time, the purge bulb can crack or become brittle, requiring replacement. Proper tools are required to replace this part and work gloves are advised. It is always recommended that the appropriate safety precautions are adhered to when attempting to fix any power tools or machinery. When working on or near an engine, ensure the equipment is turned off and completely cooled down before starting any repairs. For more accurate information on how and where to install this purge bulb, the appropriate owner's manual and included diagrams should be referenced. As an authentic replacement part, this purge bulb is suitable for use on several different models of small engine power equipment such as string trimmers, leaf blowers, and edgers manufactured by Husqvarna, Craftsman, WeedEater, and Poulan. This is a genuine part made of high-quality, durable, non-corrosive materials and is sold individually.

Combustion engines are quite loud by nature, and their sound and emissions are toned down through the use of a muffler system. In small engines, the muffler often attaches directly to the cylinder to capture the gases and reduce noise. Should that connection weaken or loosen, a replacement bolt may need to be installed to ensure a tight seal and optimal engine performance. This replacement muffler bolt is meant to be installed on edgers, blowers, trimmers and pruners from brands like Poulan, Jonesred, Weed Eater and Husqvarna. This is an OEM replacement part and is going to be responsible for fastening the machine's muffler to the cylinder. It will require the proper hex key to install properly and is considered an easy repair frequently required on many small machines.

This is a throttle housing designed to go around the throttle cable, trigger, and wire to keep all of those components secure and protected. It's made of durable plastic but wear and tear or impact can damage or break the throttle housing.It's easy to determine with visual inspection if the throttle housing needs to be replaced. A pair of work gloves and an Allen wrench will be needed to complete the repair. The process involves taking out a set of four screws that hold the old throttle housing. Take it off of the equipment and install the new one using the same screws. Once the new housing is placed, the equipment can be used as normal.This is a genuine OEM replacement part that is directly sourced from the manufacturer. It is sold as an individual component. The throttle housing is made for use with string trimmers and pole pruners manufactured by Poulan, Poulan Pro, and Craftsman. This part is sold individually. This part is sold individually.

Designed for use with a wide range of string trimmers, this momentary switch is a genuine OEM replacement part. A momentary switch, also known as a kill switch, is a safety precaution that kills an appliance's engine in a moment, even if the engine is not set to the off position. This helps prevent accidents if the operator begins to lose control of the trimmer. At the touch of a button, the engine cuts and cannot be restarted for a short period (usually about five seconds). Momentary switches are positioned in a way that they don't often sustain damage but, over time, they can wear out. Once a switch stops working, it will need to be replaced to ensure safe operation. This is a fairly straightforward fix that only requires a screwdriver to open the tiller's handle and pliers to safely remove the wiring. This part is designed for string trimmers made by Poulan, Weed Eater, Paramount, and Husqvarna. It ships individually of any other hardware is comes sourced from the original manufacturer.

This genuine Husqvarna gasket kit for a hedge trimmer or a string trimmer contains the gasket and the fastening components required to attach the gasket to the engine and seal the engine, thereby protecting it from damage. Symptoms of a blown gasket can include smoke pouring out of the exhaust, an overheating engine, or oil leakages. If any of these symptoms can be directly attributed to the gasket, it should be removed and replaced immediately before using the hedge trimmer or string trimmer again. If the blown gasket has also damaged the fastening components, a full gasket kit should be ordered to replace every component of the gasket. Remember to always wear gloves when handling, repairing, and operating outdoor equipment. This gasket kit is compatible with the following brands: MTD and Cub Cadet. This part is sold individually.

This genuine Husqvarna throttle kit can be used as a replacement part for string trimmers. This throttle kit contains the throttle cable as well as the throttle trigger. The function of a throttle cable is to connect and facilitate the use of the throttle trigger, which allows the engine to idle upon activating it.A throttle kit might have to be ordered as a complete replacement for a damaged throttle cable and throttle trigger in the event that both parts are compromised. This damage can manifest in the form of punctures, holes, erosion, or a direct impact collision that warps the throttle components such that they cannot perform their basic functions. If any of these forms of damage affect the throttle cable and throttle trigger, this genuine OEM throttle kit should be ordered as a replacement. Remember to wear gloves when handling, repairing, and operating outdoor equipment. This is an OEM part sourced directly from the manufacturer. It is sold individually. This throttle kit is compatible with the following brands: Husqvarna, Craftsman, Poulan, Weed Eater, Paramount, and Turf King.

This replacement part is a throttle kit. It is a genuine replacement part made by Husqvarna. It is important that this part is able to be used properly so that the user is able to operate the machine effectively and efficiently. A new throttle kit might be needed if the current machine is having trouble starting up or is starting slow. This can be due to the throttle not being connected properly. It is true that the throttle can become worn down over time and it is recommended that it be replaced if this is the case. Be sure to reference the specific owner's manual for more details on how to install this part on the device. This part is a genuine OEM replacement part and is sourced directly from the manufacturer to ensure a proper fit and long-lasting use.