9445Jt1 Parts

This is a replacement oil cap for a variety of small gasoline-powered tools they build. These devices include power saws, chainsaws, trimmers, and pruners. The oil cap is tethered to the oil tank, granting easy access to the engine oil for filling or replacement while preventing outside contaminants from getting into the oil basin and, thus, the crankcase. While the cap is not a moving part, it is one of the most exposed pieces of this work equipment. As such it collides with multiple heavy objects such as other tools, trees, cement structures, and truck beds. This type of wear and tear can cause the interior threads of the cap to warp so that the cap cannot be closed tightly. The cap can also be damaged so that it leaks. For safety reasons as well as for the proper operating condition of the equipment, a damaged oil cap should be replaced immediately. Make sure when removing the old cap that the tether is completely freed from the power tool, and make sure the new tether is properly attached. This replacement cap is a genuine OEM part, built to the same specification as the factory original piece and fits Ryobi and Poulan machines.

This replacement part is a motor assembly. This part is commonly found in leaf blowers and is a complete motor, which allows the equipment to run.A new motor assembly might be needed if the current one is no longer working as during prior uses. If the motor is no longer operating correctly, it might be time to replace this part. If the equipment is no longer working or has trouble starting, it can be due to a faulty motor. Work gloves are always recommended when replacing this part to ensure safety.This is a genuine OEM replacement part manufactured by Husqvarna. This part is sold individually.

This OEM replacement part is an inlet restrictor tube for leaf blowers. The inlet restrictor fits into the air inlet and is used to improve blower function. If the leaf blower is no longer functioning like it used to and is struggling to maintain its power, it might be time for a new inlet restricor tube. While this might seem like a difficult repair, replacing this part is actually a very simple process.To replace the inlet restrictor tube, make sure the engine is cool and the on off switch is in the off position. Remove the main tube from the leaf blower. Then locate the inlet restrictor tube at the base of the leaf blower. Using a flathead screwdriver, pry off the old inlet restricor tube and set it to the side. Slide the new tube into place and reinstall the main tube. This genuine OEM part is compatible with Husqvarna leaf blowers.

The trimmer cap retainer assembly here works as a replacement for many trimmer models. The cap retainer serves as a cover located on the bottom of the trimmer. It holds and protects the trimmer line or string spool. If the cap retainer is damaged or not fitting properly, replace it.This part could become damaged and cracked when using the trimmer and running into rocks, stumps, and similar objects. Replacing the retainer cap assembly is easy and should take most users less than 10 minutes.The trimmer cap retainer assembly is compatible with certain trimmers from Craftsman, Weed Eater, and Husqvarna. The piece is sold individually. It is a genuine OEM replacement part that was sourced directly from the manufacturer.

This replacement part is an edging guide. This is a genuine replacement part made by Husqvarna. This part allows the user to more carefully operate grass trimmers or edgers. This guide makes it easier for straight lines to be maintained during a job. A new edging guide might be needed if the current one is missing or damaged in any way. This can include being dented, cracked, or bent. If the current guide is not providing an accurate measure for the user to maintain straight lines, it is recommended that it be replaced. This should be a fairly simple repair and should require only common household tools such as a screwdriver or pliers. This part is sold individually and is sourced directly from the manufacturer. This part is a genuine OEM replacement part to ensure proper fit and long-lasting use.

All gasoline-powered trimmers must have throttle controls that increase the amount of gasoline flowing into the carburetor. As the amount of fuel increases and the engine revolutions increase, the clutch engages the spool and the trimming line begins to turn. The throttle trigger assembly is quite durable. However, it has several appendages and is required to be under constant pressure when in use. If any of the design parts fail, the trigger unit must be replaced or the trimmer cannot be used. To replace the throttle trigger, open the housing and disconnect the throttle cable from the old trigger. It's easy to see where the new trigger will fit in the housing because the screw holes will line up perfectly with the holes in the new throttle trigger. The throttle cable will fit into one slot on the new trigger and a spring opposite the slot will hold the trigger unit at the proper angle as the housing is replaced. This new throttle trigger is an OEM replacement part, made to the same exacting specification as the original. This throttle control is designed by Craftsman and used on most of their trimmers. It is also compatible with a few other manufacturers' trimmers, including Poulan and Husqvarna.

This replacement part is a fan housing assembly and is intended for use in different types of lawn equipment. This is a genuine replacement part made by Husqvarna. This fan housing assembly is used in line trimmers and edgers. This part is responsible for keeping certain parts of the machine cool so that the engine does not overheat and shut down. A new fan housing assembly might be needed if the user notices that the current fan assembly is not working properly. If the engine or other parts inside of the appliance begins to overheat, it is possible the fan is not working and should be replaced right away. Be sure the engine is completely powered off and cooled down before replacing the fan housing assembly. This fan housing assembly is sold individually and is sourced directly from the manufacturer to ensure a proper fit. This is also a genuine OEM replacement part.

This fuel tank is a genuine Husqvarna replacement part for a lawn trimmer, which is designed to cut grass, shrubs, bushes, and weeds. The fuel tank contains the fuel that is responsible for keeping the engine running.A lawn trimmer fuel tank might have to be replaced if there is damage to the tank that leads to leakages; this damage could come in the form of cracks, tears, rips, piercings, and erosion to the plastic material. If the fuel tank is damaged, it must be removed and replaced immediately, as the lawn trimmer cannot function without a full tank of fuel. To remove and replace a fuel tank for a lawn trimmer, one will need a flathead screwdriver and clamps; a repair can be performed in about 20 minutes following basic steps. Remember to always wear gloves when handling, repairing, and operating outdoor equipment. This fuel tank is compatible with the following brands: Husqvarna and Craftsman. This part sold individually.

The fuel system on a trimmer is contained within the fuel tank assembly and will include the fuel lines, fuel cap, and the fuel filter. It is a typical and essential system on any gas-powered trimmer. Although it might seem that a fuel system is a universal thing, there are specific styles that work with specific models. Though they are crafted of durable materials, with time and the vibrations, heat, and wear and tear put on them, they can require replacement. They can also be damaged by dropping or striking the trimmer and necessitate a replacement. It will require a star or Torx screwdriver for the replacement process. The damaged assembly will have to be removed, and any seals or lines checked for damage or leaks, and then the new assembly can be installed easily. This authentic OEM fuel tank assembly is designed to include the fuel tank, a cap, and the fuel line. It is made of durable and long-lasting materials and will offer a long period of reliable performance when installed properly. This fuel tank assembly works on string trimmers as well as pole pruners made by Craftsman, Poulan, Poulan Pro, and Weed Eater, as well as Husqvarna.

This baffle plate is a genuine Husqvarna part, sold individually. This baffle plate can be used as a replacement part in a string trimmer of a pole pruner. The purpose of the baffle plate in a string trimmer or a pole pruner is to control and regulate the amount of heat that is retained within the appliance.If the baffle plate shows signs of damage or reduced efficacy, the baffle plate should be removed and replaced by this genuine OEM replacement part in order to guarantee safe use of the appliance by its operator.Sourced directly from the manufacturer, this component is a genuine replacement part that is sold individually. This baffle plate is compatible with the following outdoor appliance brands: Husqvarna, Craftsman, Weed Eater, Poulan, and Poulan Pro.

This genuine muffler is designed to offer a replacement for select lawn and garden equipment engines. The muffler is part of the exhaust system and it is responsible for reducing the noise from the engine as it exhausts out of the unit. Over time, mufflers are known to get clogged, rust, or otherwise wear out and require replacement. If the muffler becomes clogged or damaged, it will need to be replaced in order to operate the equipment safely. This is a genuine OEM replacement muffler that is manufactured to specific standards. It is made by Weed Eater and is compatible with several of their machines, as well as units from Husqvarna and Poulan. The muffler is sold as an individual unit and does not include the hardware required for installation. It is used in select trimmers, pole pruners, edgers, and lawnmowers. To replace the muffler, it will be important to wear gloves and allow the engine to cool completely. Remove the old muffler and replace it with the new unit, securing it into place with the existing hardware. In the event that the hardware also needs to be replaced, it can be purchased separately.

This genuine replacement ignition module is part of the starting system in select models of gas string trimmer/edger units. It connects the spark plug to the engine and supplies the electric current to generate the spark for ignition. In the event that the module wears out or becomes defective, the engine may fail to start. With a faulty ignition module, it will be difficult to operate equipment if it works at all, which is why an immediate replacement with an OEM part like this is necessary. This genuine OEM ignition module is manufactured by Husqvarna and compatible with select trimmers from Poulan, Weed Eater, and Husqvarna. This unit includes the ignition module, the rubberized wire, and the spark plug boot or cap. Hardware and other components are not included. It may be a good idea to replace the spark plug when replacing the ignition module if it has not been replaced recently. Be sure to wear gloves and allow the engine to cool before doing any repairs on the ignition or other engine components. Be sure to disconnect the power supply before beginning any repairs for safety, as well.

This replacement part includes one fuel cap assembly and is compatible with specific models of gas-powered blowers and trimmers. This part is made of high-quality plastic. It consists of a black cap that is approximately 2 inches in diameter with a retainer connection to keep the cap from falling on the ground. The cap is meant to cover the fuel tank's fill nozzle. Replacing a lost, leaky, or damaged cap won't require any tools. This original OEM part is designed to deliver a perfect fit for compatible equipment. It is compatible with outdoor power equipment from Craftsman, Husqvarna, Poulan, and Weed Eater. This replacement part is sold individually.

This replacement screw is intended for use on a variety of lawn and garden tools to attach components. It is a genuine OEM part sourced directly from the manufacturer. It is used to attached the trimmer head to the shaft in weed eaters and in many other applications on other tools. Overuse and normal wear and tear can cause damage to the screw. The screw can also become stripped when it is over-tightened or bent from contact with heavy debris. The screw will need to be replaced if this happens. Routinely inspecting equipment will help reveal broken or missing screws that need to be replaced or tightened. This screw is a star-slotted screw that requires a Torx screwdriver to remove it from the machinery. If the screw is in a tight-fitting area, an extension socket with a Torx bit can be used to remove the screw and to install a new one. When replacing a screw, check the remaining screws for damage and tighten any that are loose. This screw is a silver-colored, heavy-duty metal screw sold individually. It is compatible with trimmers, leaf blowers, leaf vacuums, hedge trimmers, and other equipment manufactured by Craftsman, Weed Eater, Poulan, and Husqvarna.

This muffler bolt is an OEM replacement part that is sourced directly from the manufacturer. These bolts secure the muffler cover to the muffler on chainsaws, trimmers, and other small engines found in lawn and garden machines. Regular use can cause the bolts to loosen and possibly fall out of the cover. The muffler cover requires two bolts to secure it. These bolts have a hexagon-shaped head and require a hex key or Allen wrench to install or remove them from the cover.The muffler on small engines softens the noise coming from the machine. Being exposed to loud noise for long periods can lead to hearing damage. The muffler helps lessen this risk. The muffler cover protects the inner parts of the muffler. Rain, snow, dirt, and debris can cause rust and corrosion. Use the Allen key or hex wrench to loosen the muffler bolt if it is rusted or bent. Install the new bolt and tighten it using the hex wrench. The muffler bolt is made of high-quality steel and it sold as an individual part. The muffler cover requires two bolts to secure the cover. This bolt is compatible with chainsaws, hedge trimmers, and other small engines manufactured by Poulan, Weed Eater, and Husqvarna.