Need Help?
Call or text
Some parts shown may not be for your model. To see parts for your model only, select it from "Matching Model Numbers" list on the left.
Fix loud banging, grinding noises, or oil leaks during spin with this inner tub assembly. Includes spider and shaft. Advanced repair, 2-4 hours.
The biggest challenge was replacing the inner tub assembly (with spider and shaft) without full access to the top of the washer, only to the back. Due to space limitations, the matching stacking gas dryer could not be removed: it could only be elevated (using wood blocks) about 4 inches above the top of the washer. Removing the washer's hoses, motor, control panel, and rear weight, and releasing the shock absorbers, was fairly easy. But supporting the outer tub assembly, with its front-end... Read more
Usually ships within 4 - 14 days
Plastic cover that protects the evaporator fan and directs airflow in your refrigerator. Replace if cracked, broken, or missing to restore proper airflow.
Replaced the Condenser Fan Motor. Read more
Replace a cracked, broken, or missing temperature control knob on your refrigerator. Installs on the control shaft to restore accurate temperature selection.
Oven light won't turn on when door opens? This door-activated switch controls interior lighting. Simple front-access replacement restores function.
Took the side panel off and pushed it to the front and then disconnected the wires. Put the wire on the new part and pushed it back into the hole and then put the side panel back on. Then plug In the stove and it worked fine. Read more
White timer knob for washer control panel. Replaces worn, cracked, or missing knob that won't engage the timer shaft. Screws onto timer control shaft.
I purchased the part from AppliancePartsPros.com and watched an Utube video and fixed it in less than 2 minutes. Read more
Replaces a cracked or broken splash tub cover assembly on your washer. Installs around the tub to protect internal components from water damage.
Replacement front roller assembly for refrigerators. Includes leveling screw. Needed when roller is cracked, broken, or leveling screw is bent or damaged.
Tilted the refrigerator to the left enough to get at the screws. My unit had one front screw and two bottom screws, a bit different than the one in the video that had only one front screw. In all it took about twenty minutes. Read more
Replacement pin for washer components. Secures and connects internal parts. Needed when original pin is broken, missing, or worn from use.
Rubber bumper cushions washer lid closure. Installs between lid and cabinet to absorb impact and reduce noise. Replace if worn, cracked, or missing.
Rubber grommet cushion for laundry center washers. Isolates vibration and prevents wear where components pass through openings. Replaces worn or missing.
Pressure hose and adapter assembly that connects the air chamber to the water level sensor. Replace if tube is cracked, pinched, or leaking air.
Molded insulation liner that fits inside the range oven cavity. Replace if yours is damaged, compressed, or missing to restore proper heat containment.
Removed old damaged insulation, purchased replacement insulation and installed it. Read more
Water inlet hose for washers and laundry centers. Connects the water supply to your machine. Replace if cracked, torn, leaking, or damaged.
Took it apart and replaced the broken parts Read more
Secures the top or front panel to your laundry center frame. Replace if bracket is cracked, broken, or missing to restore proper panel alignment.
My washer and dryer was stacked and I needed the right parts to put the tops and "feet" back on them. Read more
Connects your washing machine to the household water supply. Replace this flexible inlet hose if cracked, leaking, or worn to restore proper flow.
Unscrewed the front lower panel ( 2 screws ). Disconnected the pump hose clamp and removed the hose. I loosened the lower back panel and pulled out the drained hose from the rear. Replaced with new hose put back clamp and panels. Very easy Read more
Secures cooktop surface elements to your range for stable contact and even heating. Replace if bent or worn to restore proper element positioning.
Replaced element and adjusted wiring after removing rear panel of stove. Tightened one of the contacts. Checked current with meter. Adjusted insulation. I ordered an element and standoffs to keep the element from touching the oven surface but you provided me with the correct replacement which came with the clips unlike the authorized distributor in my area the first time I replaced the element. My wife thinks the oven is working better than the day we first used it. Reattaching the fan shroud... Read more