Need Help?
Call or text
Some parts shown may not be for your model. To see parts for your model only, select it from "Matching Model Numbers" list on the left.
Fix E22 error codes or no hot/cold water issues with this water inlet valve. Controls water flow during fill cycles. 10-minute DIY repair.
I reseached these error codes and compared them to others problems. After deciding that I was gonna order the part and fix it myself I was at ease to find out it took 10min to fix! And it actually worked! The washer was pausing during cycles, cloths were soaking wet, spin cycle only worked on drain and spin at the end of the Ioad (it would spin slowly otherwise), soap dispenser still had the soap in it or it would be filled with water after the cycle was over. I watched videos on how to change... Read more
Seals the door opening on front-load washers to prevent leaks during cycles. Replace if torn, cracked, or leaking. Confirm fit with your model number.
Ordered the part from the Parts Pro and was happy to see the price was 30% below all other dealers I called. The delivery was a few days behind schedule but it was worth the wait for the savings. Read more
Fix a washer that won't drain or leaves clothes soaking wet. This drain pump removes water during the drain cycle. DIY-friendly, about 1 hour to install.
I drained the pump and removed coins etc from pump drain screen. This did not solve the problem, so I called Slagers, our local appliance store in Iowa City. The repair man came out two days later in the AM. He drained the pump again and checked the codes--he had to use our wireless internet because Sprint would not work from our house to determine the error code problem. He said it was the pump. I assumed he would call his Parts Dept for price and availability. Wrong assumption! He... Read more
Secures the door boot seal to prevent water leaks in front-load washers. Replace if rusted, broken, or boot becomes loose. Verify fit with your model.
I replaced the following parts in the GE WASHER that I have owned for approximately 14 years: Part no.: WH08X10038 - rubber gasket Part no.: WH01X10277 - inside gasket clamp Part no.: WH01x10279 - outside gasket clamp The two gasket clamps were ordered on 1/18/24 and delivered the next afternoon to my front door. I already had the replacement rubber gasket from a long time ago. I will mention that I have NEVER tried replacing a part on a major appliance. Since the washer machine is 14 years... Read more
If your washer won't start, beeps with door open errors, or the door won't lock, this door lock assembly fixes the issue. Takes about 15 minutes to install.
Went on line general information made me realise I needed to replace the door lock.Signed into appliancepartspros.com found the part and ordered it. That took about 5 minutes. A day and a half later the part arrived at my home. Repair took about 15 total minutes machine works like new again. What a pleasure to have appliance parts pros for obtaining parts at a reasonable price with prompt delivery. Read more
Replace your washer's drive belt if you hear squealing, see smoke, or the drum won't spin. Confirms fit for GE front-load models. Video guide included.
I replaced the broken drive belt first and noticed the drive pulley loose. The nut that had held it in place had backed off. This resulted in significant wear on the pulley hub. I just tightened it up and installed the belt. I noticed the belt had a tendency to change its position on the pulley depending on the direction of rotation. I was a bit concerned but decided to see what would happen. This fix lasted for about a week. The belt came off the pulley and broken again. I called a... Read more
Secures the door boot seal to create a watertight barrier in front-load washers. Replace if loose, corroded, or causing leaks. Confirm fit with your model.
Replaces a broken, damaged, or corroded suspension spring in your washing machine. Supports the tub and absorbs vibrations during wash cycles.
I literally could have done this job with a blindfold on! No kidding. Come on people! My grandmother could have done this one! Since the rubber gasket/skirt in the front of the washer (seals the door) was twisted when the spring failed and the drum failed, I had to remove the wire hoop and spring that held it in place and readjust the skirt. Easy. Them I removed the top of the washer (6 screws). Easy. Immediately you could see the failed spring. I ordered 2 springs so I could replace both... Read more
Fix slow draining or leaks at the filter access. This washer drain pump filter traps lint and debris before they reach the pump. Easy DIY replacement.
Order it and installed. Read more
Fix error code 38 or washer won't fill with water. This diverter valve routes water between cycles. DIY repair restores normal operation quickly.
I replaced the door seal for the leak. We had a small tear in the sealing surface that resulted in water dripping down the front of the machine (just below the door). I also replaced the detergent dispenser main box with diverter unit. This corrected excessive water being left inside the detergent dispenser at the end of each cycle. I highly recommend replacing the dispenser seal and gasket nozzle to be on the safe side. As these parts are subject to wear and fatigue over the life of the... Read more
Reduces drum vibration during spin cycles. Replace if washer shakes excessively or drum moves too much. Mounts between drum and base. Sold individually.
Replaced all 4 shocks, and 2 suspension springs. The overall fix was easy for the shocks which only require a quarter turn with a cresent wrench to replace. The suspension springs are more difficult because the bottom of the washer drum must be supported due to the substantial weight. I used a car jack to support the drum from the bottom and a long bunge wrapped around the main drive pulley. I.would not have been able to do this as a one person without it. While replacing the suspension parts,... Read more
Routes wastewater from your washer's drain pump to household plumbing. Replace this external drain hose if cracked, kinked, leaking, or damaged.
Stacking kit mounts your dryer securely on top of your washer to save floor space. Includes brackets and hardware. Replace if missing or damaged.
Ordered genuine parts from you! Read more
Fix a washer that won't spin or agitate. This motor assembly restores drum rotation and drive function. Typical DIY repair in 1-2 hours with basic tools.
After test that showed the tachometer signal was not there I replaced the motor.I paid for 2 day shipping and two days later I was putting the new motor in.I have to thank Appliance parts pro for the video,I had no idea how to replace this and the reason I always buy appliance parts from this Company Read more
Siphon pipe for washer drain air-break assembly. Prevents backflow and unintended siphoning. Replace if cracked, broken, or missing from detergent dispenser.
Ordered what I needed and installed them Read more
Rear counterweight for washers. Restores proper balance to the tub assembly. Replace if cracked, broken, or missing to prevent vibration issues.