Need Help?
Call or text
Some parts shown may not be for your model. To see parts for your model only, select it from "Matching Model Numbers" list on the left.
Microwave won't stop running or starts when door closes? A faulty door switch is likely the cause. This safety switch is a 45-minute DIY fix.
The first symptom was our microwave would continue to run after the time was up. The light would go out, the turn table would stop but you could still hear the microwave running and whatever was in it would continue to cook. The only way to stop it was to open the door. It was intermittent at first but eventually it would always run no matter what as long as the door was closed. Several other posts referenced these switches as the problem. I just replaced both and problem gone. It turns out... Read more
Microwave runs with door open or won't start? This door interlock switch fixes unsafe operation. Most DIYers replace all 3 switches in 30 minutes.
Removed and replaced 3 door switches and mounting bar that holds switches plastic gets brittle with age and each switch comes out slightly different from each other, the chances of breaking a mounting pin is very easy. care should be taken when snapping mounting bar back into place to insure top latch and bottom latch locate properly insure bar is proper aligned when tightening screws their is free play in mounting bracket that could affect door properly engaging switches. NOTE that their are... Read more
Microwave won't start or heat but light works and timer counts down? A faulty monitor switch is often the cause. DIY repair typically under 30 minutes.
Microwave won't turn on or is completely dead? A blown fuse is often the cause. This safety fuse protects against power surges. Easy 5-minute DIY fix.
I read on line about other such ovens doing the same thing mine was doing, absolutely nothing! I even read stories of a major retailer telling customers to throw the microwave away. There's nothing you can do to fix it. After replacing a simple fuse that I ordered from you, the Advantium is as good as new. It took a grand total of 5 minutes to make the repair. The shipping cost more than the part, but it was all very worthwhile. Read more
Fix a microwave that won't start or stops mid-cycle with this door interlock monitor switch. Ensures safe operation when door closes. DIY repair.
Microwave not heating? The magnetron generates the radiation that cooks food. Moderate DIY repair—discharge capacitor first, then swap 3 screws.
14 year old GE Profile microwave wouldn't heat, but had power. Read reviews here. Ordered triumvirate of magnetron, capacitor, & diode. Was hoping not to need the capacitor as this was an expensive part; and if not needed to return to AppliancePartsPros, which has been SOP. After watching a couple YouTube videos of microwave capacitors being shorted, I made a capacitor discharge tool ordering 24W 100K Ohm resistor and high voltage test wires w/ alligator clips from amazon. At the same time,... Read more
Replace your cracked, broken, or missing microwave glass cooking tray. This rotating turntable supports food for even heating in your microwave cavity.
Ordered new tray from Appliance Pros Read more
Molded bracket that holds and aligns door interlock switches and latch levers behind the front panel. Replace if cracked, warped, or brittle plastic broke.
Replaced damaged switch but in the meantime broke part of the board latch. So, replaced that too. Read more
Microwave not heating or humming loudly? The high-voltage diode converts AC to DC for the magnetron. Repair takes 30-45 minutes with basic tools.
I replaced both the Magnetron and the high voltage diode. I now have a fully functional microwave. I received the parts on time and the quality was good. I would use appliance parts pro's again. Read more
Microwave not heating but runs? Replace the magnetron to restore cooking power. Intermediate DIY repair taking 1-2 hours with proper safety steps.
I ordered the capacitor, diode, and magnetron in hopes that I would be able to complete the repair using the less expensive parts. I first removed the oven from the wall and then I removed the metal housing to access the internal parts. I discharged the capacitor using a pair of insulated needle nose pliers. Then I changed out the diode and the capacitor and reassembled the unit and tested it. It still did not heat so I disassembled the unit again and replaced the magnetron this time.... Read more
Microwave not heating? A failed high-voltage capacitor prevents the magnetron from working. Requires discharging and wall unit removal to replace.
Replacement glass tray for microwaves. Provides a stable, rotating surface to hold dishes and food during cooking. Needed when original is cracked or broken.
Ordered a new one and it was here 2 days later! Read more
Fix a grinding noise or wobbling tray with a new turntable coupler. This hub connects the motor to your microwave's glass tray for smooth rotation.
Replaced the motor after only 2 years! Read more
Replace your microwave's burnt-out light bulb to restore cavity and cooktop illumination. Improves visibility while cooking. Confirm fit with your model.
Replaced the magnetron, diode, and interior light. Read more
Protective resin shield that covers internal microwave components and ducting. Replace when original is cracked, broken, or missing to restore clean finish.
After researching on the internet, I decided replacing the wave guide cover would be much cheaper than replacing the microwave. Plus I couldn't even find one that worked with the existing trim kit. Had a bit of difficulty removing the old cover, but the folks at Appliance Parts Pro answered my email question within 24 hours. I received the replacement part a day or so later. GREAT CUSTOMER SERVICE! Thanks! Read more
Replacement guide roller assembly for microwave turntables. Restores smooth rotation when the original roller is cracked, broken, or missing.