Maytag 5807Tq0 Parts

The Blower Wheel Bearing is an OEM part for LG air conditioners. This bearing supports the blower wheel, ensuring smooth rotation and efficient airflow throughout the unit. 

Causes of a bad blower wheel bearing can include wear and tear from regular use, lack of lubrication, or damage from debris or impact. 

Symptoms of a bad blower wheel bearing include:

• Unusual grinding or squealing noises from the blower area
• Reduced airflow or diminished cooling efficiency
• The blower wheel wobbling or vibrating excessively
• The fan motor struggling to start or run smoothly

This OEM LG part is also compatible with some Kenmore models.

Replace a missing or damaged installation kit with this Install Part Assembly. Designed for select air conditioners, it helps secure and seal the unit during setup for a stable fit and reliable performance.

• Provides the correct mounting/finishing components needed for proper installation
• Helps seal the opening to minimize air leaks and reduce vibration/noise
• Restores secure, stable support of the chassis during and after install
• Symptoms indicating replacement: incomplete installation, loose fit, rattling, or drafts around the unit

• Disconnect power before beginning; use two people to lift and support the unit
• Follow the model's installation instructions carefully
• Inspect the opening/sleeve; install level and tighten all fasteners securely
• After installation, verify a tight perimeter seal and stable, rattle-free operation

Replacement thermostat assembly that regulates temperature and cycling to help keep food at the intended temperature. Restores proper temperature sensing and on/off control for refrigerators or freezers when the original unit fails. What it does:

• Detects internal temperature and signals the compressor/fans to cycle on and off
• Restores stable temperatures when a failed thermostat causes overcooling or warming
• Common symptom fixes: appliance runs constantly, won't reach set temperature, or cycles erratically
• Works as the temperature-control component in the cooling circuit

• Disconnect power to the appliance before starting any repairs
• Handle the sensing element/sensor carefully and avoid pulling on wires or connectors
• Reconnect all electrical connectors securely and route any harnesses the same way as the original

This remote controller assembly replaces a malfunctioning TV remote control PCB and housing to restore infrared/IR command transmission and on-unit button control. Ideal when the remote stops responding or buttons become unresponsive. What it does:

• Replaces the internal PCB and button assembly that sends IR signals to the TV.
• Restores remote control functions like power, volume, channel, and input selection.
• Helps resolve symptoms such as no response from the remote, intermittent commands, or stuck/non-working buttons.
• Works with the existing remote cover and batteries if those components are reused.

• Disconnect power to the TV and remove batteries from the remote before replacing the assembly.
• Use appropriate small screwdrivers and keep track of screws and clips; handle the PCB by its edges to avoid damage.
• Reassemble carefully, insert fresh batteries, and test all functions after installation.

This replacement frame is a structural component that supports and aligns adjoining panels and hardware in your appliance. Replacing a cracked or warped frame restores a secure fit, reduces vibration, and keeps panels and trim seated correctly.

• Provides rigid mounting and alignment for the associated panel or assembly
• Keeps screws, clips, and trim in position to prevent looseness or rattling
• Helps maintain proper clearances so doors or panels open and close smoothly
• Common signs of failure: cracked plastic, broken tabs, visible gaps/misalignment, or a panel that won't stay attached

• Disconnect power to the appliance before servicing
• Note fastener locations and retain all screws/clips to transfer to the new frame
• Inspect mating panels and clips; replace any damaged retainers before reassembly
• Tighten fasteners evenly and avoid overtightening to prevent cracking the new part

This isolator routes microwave energy between the magnetron and waveguide to help protect components and maintain consistent heating performance. Replacing a failed isolator can restore reliable cooking and help prevent further high-voltage damage. What it does:

• Directs RF energy from the magnetron into the waveguide/cavity
• Helps protect the magnetron by reducing reflected energy
• Aids in preventing arcing or burn damage in the waveguide area
• Common symptoms of failure: no heat or uneven heating, loud humming/buzzing, visible arcing/burn marks near the waveguide

• 1 isolator

• Disconnect power and discharge the high-voltage capacitor before servicing; risk of electric shock
• Handle waveguide components carefully; avoid contaminating RF surfaces and note exact orientation
• Take photos of the original setup to match positioning and fastener locations

Replacement drain pipe that routes wastewater from the appliance pump to the home drain. Restores proper drainage and helps prevent leaks or standing water when the original tubing is cracked, clogged, or damaged. What it does

• Directs wastewater from the pump to the household drain so the appliance can complete normal drain cycles.
• Replaces cracked, split, kinked, clogged, or leaking tubing that can cause slow draining or standing water.
• Fits the OEM drain outlet and drain connection; secures in place with hose clamps to maintain a watertight seal.
• Matches OEM shape and routing to avoid pinches or improper drainage.

• Always unplug the appliance and turn off the water supply before beginning service.
• Remove the access panel to reach the pump/drain connections; detach the old pipe and install the replacement in the same orientation.
• Use the original hose clamps or replace with equivalent clamps; tighten until snug—avoid overtightening.
• After installation, run a short drain cycle and check all connections for leaks.

This NTC thermistor assembly senses temperature and sends readings to the control board so the appliance maintains the correct cooling cycle. It replaces a failed or intermittent temperature sensor to restore proper temperature regulation. What it does:

• Measures compartment temperature and relays the signal to the control board
• Helps the appliance decide when to run compressor and fans for stable cooling
• Commonly replaces units that cause incorrect temperature readouts, excessive frost, or compressor cycling
• Works as the OEM temperature-sensing element in the appliance's refrigeration system

• Disconnect power before accessing internal components to avoid shock
• Handle sensor and wiring gently; avoid bending or crimping the thermistor tip
• Verify connector seating and routing to prevent pinched wires or interference with moving parts

This trim piece restores the cabinet or control area's finished appearance and covers the appliance edge where panels meet. It replaces cracked, chipped or loose trim to make the exterior look complete again. What it does:

• Provides a finished, decorative edge around a door, control panel or panel seam
• Hides gaps and covers mounting hardware for a cleaner look
• Replaces damaged or cracked trim that affects appearance
• Helps keep panel edges aligned and reduces snagging on clothing

• One replacement trim piece as shown

• Disconnect power before starting work if trim removal affects electrical components
• Trim is usually held by clips or screws; carefully pry or remove fasteners to avoid damage
• Handle gently to prevent cracking; lost or broken clips may need separate replacement

This compressor isolator is a rubber mount that cushions and reduces vibration and noise from the compressor, helping keep the appliance quieter and preventing metal-to-metal contact. What it does:

• Dampens compressor vibration to reduce noise and rattling
• Helps prevent compressor movement that can strain mounting hardware
• Reduces transfer of vibration to the cabinet and surrounding components
• Commonly replaced when vibration noise or scraping is heard from the base

• One compressor isolator (rubber mount)

• Disconnect power to the appliance before any service and work with the appliance unplugged
• Access may require tilting or moving the appliance; use safe lifting practices and get help if needed
• Inspect surrounding mounts and hardware; replace like-for-like and verify fit before final assembly

This air filter assembly replaces the cabin/air-cleaning filter used to trap dust and airborne particles, helping maintain airflow and indoor air quality. Designed as a direct replacement to restore the appliance's air filtration performance. What it does:

• Filters airborne dust, lint, and common particulates from circulating air
• Helps reduce odors and visible dust buildup on internal components
• Restores airflow through the appliance's ventilation path when a clogged filter causes reduced performance
• Commonly replaced when you notice reduced airflow, increased dust in the home, or diminished air-cleaning effectiveness

• Disconnect power to the appliance before servicing to avoid electrical shock
• Access the filter through the unit's filter/grille area; remove any retaining clips or screws as required
• Handle the filter carefully; avoid damaging the filter media or frame
• Dispose of the old filter per local regulations and confirm proper seating of the new filter before restoring power

Replacement air filter that helps reduce odors inside compatible refrigerators, keeping stored foods smelling fresher. Installs in the refrigerator's interior filter housing to absorb common food and musty odors between replacements. What it does:

• Absorbs and helps reduce common food and musty odors inside the refrigerator
• Helps maintain a fresher-smelling storage environment for produce and leftovers
• Designed to sit in the refrigerator filter housing for continuous odor control
• Replace when persistent odors or manufacturer maintenance intervals indicate

• Follow the refrigerator owner's manual for the correct filter housing location and orientation
• Typically requires no tools; slide or snap the old filter out and install the new one
• Observe basic safety: avoid contact with moving parts and follow manufacturer's power/disconnect guidance
• Dispose of the used filter according to local regulations

Note: Contains Left and Right curtains, foam seal and hardware.