Wwa8648malwh Parts

The Affresh Washer Cleaner 3 Pack is an OEM cleaning accessory designed specifically for washing machines. This multipack contains 3 packets of a proven formula that helps eliminate odors from the washer tub, door, gasket, and drain areas. Regular cleaning is important to remove dirt, soap scum, mildew, and other residue that can build up over time and lead to odors. The Affresh tablets contain oxygen-powered enzymes and fresh scent boosters that are released during the cleaning cycle to safely and effectively eliminate musty smells.

This multipack of Green 4.2-ounce tablets ensures you have enough doses for consistent cleaning to keep your washer smelling fresh. As the #1 recommended washer cleaner brand, Affresh is also compatible for use in Maytag, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and select Kenmore washers.

The Drive Belt is an OEM part for GE washing machines. It functions as a critical component that connects the motor to the drum, transferring power from the motor, which in turn allows the drum to spin during the wash cycle. Made from rubber reinforced with fibers, this belt is designed to withstand the stress of spinning and agitating motions.

Symptoms of a bad Drive Belt include:

• The washing machine drum not spinning,
• A squealing or screeching sound when the washer is running,
• Visible fraying, glazing, or signs of wear on the belt,
• The belt slipping off the motor or drum pulley.

Causes of drive belt failure typically include regular wear and tear from use, overloading of the washer which puts extra strain on the belt, or exposure to oils and other substances that can degrade the rubber.

This GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore models.

The Washer Fill Hoses are OEM parts for various washing machines, specifically designed to transport hot and cold water from the home's supply lines to the washer. These hoses are essential for the proper functioning of the washing machine, ensuring a steady and reliable flow of water during the wash and rinse cycles. Coming in packs of 2, each hose measures 5 ft.

Causes of bad washer fill hoses can include wear and tear over time, exposure to high water pressure, or damage from kinks and bends. Additionally, hoses can deteriorate due to exposure to harsh water conditions or chemical buildup.

Symptoms of bad washer fill hoses include:

• Leaks or puddles around the washing machine
• Reduced water flow into the washer
• Visible cracks or bulges in the hoses
• The washer taking longer than usual to fill with water

These washer fill hoses are compatible with a variety of washing machine brands and models, ensuring a secure and efficient water supply.

This is a genuine OEM replacement agitator coupling part for washing machines. The role of an agitator coupler is to act as a connector between the agitator and the agitator shaft in the washing machine.If a coupler is damaged, there are some common symptoms that may be noticeable including: a grinding sound during the wash cycle, the washer refusing to agitate or spin, or the washing machine shaking and moving during the wash cycle. Other signs may include very wet clothes or the motor spinning without the drum rotating. Above all, the most common symptom is simply a loud, unpleasant noise while the machine is operating.This replacement agitator coupling part is compatible with General Electric, RCA, JCPenney, and Hotpoint washers. This coupling is used specifically for 20 spline drive shaft transmissions. The agitator coupling piece comes with instructions to make the installation process as quick and simple as possible.

Black. 8-18 AB HXW 3/8

This hose clamp kit secures the washer's hoses at the pump, tub, or valve connections, helping stop leaks and hose blow-offs. Replace worn or missing clamps to restore a tight, reliable seal during fill, wash, and drain.

• Secures drain, pump, and fill hoses to fittings to maintain a watertight seal
• Helps prevent drips, leaks, and hoses slipping off during vibration
• Replaces clamps that are rusted, stripped, deformed, or missing
• Common symptoms: water leaking at hose joints, loose hose connections, clamp won't tighten
• Useful when installing a new hose, pump, or valve

• Unplug the washer and turn off water supplies; have towels or a pan ready for residual water
• Release and remove old clamps; seat the hose fully over the fitting before installing new clamps
• Tighten evenly and do not overtighten to avoid hose or fitting damage
• Restore power and water, then run a short cycle to check for leaks at each connection

Size: 10-12 a. Includes 12 screws.

Secure your washer's drain hose with this drain hose strap. It keeps the hose positioned at the standpipe or laundry tub, helping prevent movement, dislodging, and messy leaks when vibration increases during drain and spin cycles.

• Secures the drain hose to a standpipe or utility sink, per installation guidelines
• Helps prevent the hose from backing out or spraying water during operation
• Reduces strain and kinking by keeping the hose routed in place
• Replaces a missing, cracked, or broken strap

• Unplug the washer and turn off water supply before starting
• Position the drain hose in the standpipe or tub and tighten the strap to secure it without kinking the hose
• Maintain the manufacturer-recommended air gap and hose height per your installation manual
• Run a quick drain/spin to ensure the hose stays secured and there are no leaks

Package of 12

Fits GE/Hotpoint washers.

This compressor start relay helps the refrigerator compressor start reliably so the appliance can cool properly. It replaces a failed relay to restore normal compressor startup and reduce hard-start symptoms. What it does:

• Supplies the compressor's start winding with a timed boost to initiate motor start
• Helps prevent repeated clicking or humming when the compressor struggles to start
• Commonly used when the refrigerator is warm, not cooling, or the compressor does not run
• Works with the compressor start circuit as a replacement electrical relay

• Disconnect power to the appliance before accessing the compressor or electrical components
• Replace the relay on the compressor terminal block; ensure firm, correct terminal seating
• Inspect the compressor and start capacitor for related faults while servicing

This shield cover protects internal appliance components from heat, debris and incidental contact, helping maintain safe operation and prevent damage. It fits into the appliance as a non-electrical protective guard. What it does

• Shields wiring, sensors and nearby components from heat and falling debris
• Helps prevent accidental contact with moving parts or hot surfaces
• Preserves component alignment by covering and supporting nearby assemblies
• Reduces the chance of shorting from loose objects or lint

• One shield cover

• Disconnect power (unplug appliance or shut off circuit) before servicing
• Use basic hand tools; avoid forcing fasteners to prevent damage
• Watch for sharp edges and wear gloves as needed
• Confirm exact fit against your model's parts diagram before final assembly

Package of 12

This support is a replacement mounting bracket that helps secure internal components and restore proper alignment for stable operation. It's a direct-fit shaped bracket that replaces worn or damaged supports to reduce rattling and shifting. What it does:

• Provides structural support for internal appliance components to maintain correct positioning
• Prevents movement that can cause noise, misalignment, or premature wear
• Restores secure mounting after damage, helping parts function as intended
• Designed to match OEM fit and mounting points for straightforward replacement

• One mounting support bracket

• Safety first: unplug the appliance or disconnect power before starting work
• Basic hand tools typically required; keep fasteners and orientation noted during removal
• Inspect surrounding parts and mounting points; replace any damaged hardware

This foot pad cushions and supports an appliance leg to reduce vibration and protect flooring. It helps stabilize and level the unit for quieter operation and prevents metal-to-floor contact that can cause scratches or noise. What it does:

• Cushions the appliance leg to absorb vibration and reduce noise
• Helps stabilize and level the appliance to prevent rocking or tilting
• Protects hard floors and finishes from scuffs and scratches
• Can reduce movement that contributes to rattling or squeaking during operation

• Disconnect power and water and follow appliance safety procedures before working underneath the unit
• Raise or tilt the appliance only as recommended by the manufacturer; use a helper or a suitable jack for safety
• Slide or press the foot pad onto the appliance leg until fully seated; the appliance sits level and stable
• Re-check level after a short test run and adjust feet as needed

This bearing supports the washer drum for smooth rotation and helps keep the tub aligned during spin cycles. Replacing a worn bearing restores quiet operation and reduces excessive drum movement. What it does:

• Provides a low-friction surface for the drum shaft to rotate on
• Keeps the inner and outer tubs properly aligned to prevent wobble
• Helps prevent metal-on-metal contact that causes grinding or rumbling sounds
• When paired with seals, helps limit water reaching the bearing area

• One bearing

• Disconnect power and water before starting any repair
• Expect partial disassembly of the washer cabinet and drum
• Specialized tools (bearing puller, press) may be required for removal/installation